Atlona AT-DVI40SRS Manual de usuario
DVI over CAT5e Extender
AT-DVI40SRS
User Manual
1
Safety and Notice
The AT-DVI40SRS DVI over CAT5e Extender has been tested for conformity to
safety regulations and requirements in the US, and has been certified for international
use. However, like all electronic equipment, the AT-HDMI40SRS should be used with
care. Please read and follow the safety instructions to protect yourself from possible
injury and to minimize the risk of damage to the unit.
zFollow all instructions and warnings marked on the unit.
zDo not attempt to service the unit yourself, except where explained in this manual.
zProvide proper ventilation and air circulation. Do not use near water.
zKeep unit away from objects that might damage the device and assure that the
placement of this unit is on a stable surface.
zUse only the manufacturer’s power adapter and connection cables. They are
designed for this unit.
zDo not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
2
Features
The AT-DVI40SRS extends your PC DVI transmission distance up to 60m/200ft
with resolution 1024x768 @60Hz. With AT-DVI40SRS, users can transmit high
quality digital video of PC applications through one cost effective CAT-5/5e to the
remote monitor or projector, instead of using short and expensive DVI cables. With
embedded EDID inside the adapter, your PC will continue to send the digital video
even when the monitor is not connected. The user can then disconnects the monitor,
place it in a remote location and reconnect it without rebooting the operating system.
The AT-DVI40SRS includes two units: transmitting and receiving units. The
transmitting unit is connected to your PC DVI output and the receiving unit is
connected to the monitor. While successfully connected, the two LED lights on
RJ-45 connector will blink. The transmission distance between the sending and
receiving units can be up to 60m/200ft at XGA (1024x768) and 30m/100ft at UXGA
(1600x1200). With compact size, AT-DVI40SRS is the most cost effective choice for
bringing your impressive digital video to the remote display.
zDVI 1.1 compliant
zHandy DVI-D to RJ-45 Adaptor with programmable EDID feature
zExtends the transmission distance from the sources up to 60m/200ft at XGA
(1024x768@60Hz) and 30m/100ft at UXGA (1600x1200@60Hz)
zMinimize the cable skew by adjustable 8-level equalization knob
zSupports 1080i/1080p HDTV resolutions & VESA standards
zReceiving unit can learn EDID information for DVI/HDMI enabled display device
Introduction
3
Package Contents
Technical Specifications
zVideo Bandwidth: 1.65 Gbps (DVI 1.1)
zInput TMDS signal: 1.2 volts (peak-to-peak)
zInput DDC signal: 5 volts (peak-to-peak)
zDVI-D Connector (digital only)
zRJ-45 Connector: 2 indication LEDs
zDimensions: 70mm x 60mm x 25mm / 2.8"x2.4"x1" (L x W x H)
zWeight: 119g / 4.2oz
z1x DVI CAT5e Mini-Transmitter
z1x DVI CAT5e Receiver
z1x 5V power adapter
z1x User Manual
4
Front View – Receiving Unit
Rear View - Transmitting Unit
TMDS
Panel Descriptions
TMDS: Plug in a CAT-5/5e/6 cable that needs to be linked to the TMDS
connector of the Transmitter.
5V DV: Connect to 5V DC power supply.
5V DC
DVI OUT
EQ
DVI Out: Connect a DVI display with a DVI M-M cable here.
Rotary switch: Adjust the equalization strength to the received TMDS
signals. 0-7= strongest – weakest.
5
1. Connect the mini-transmitter to your DVI source (PC).
2. Connect the receiver to the remote DVI equipped monitor.
3. Make sure your CAT-5/5e/6 cable is tightly connected and not loose.
4. Enjoy your high quality PC video on the screen.
1. If you need to modify EDID content in DVI Extender, you can use EDID
Reader/Writer to update DVI EDID information.
2. All the transmission distances are measured using Belden CAT-5e 125MHz.
3. To reduce the interference among the unshielded twisted pairs of wires in
CAT-5/5e/6 cable, you can use shielded CAT-5/5e/6 cables to improve EMI
problems, which is worsen in the long transmission.
4. Because the quality of the CAT-5/5e/6 cables has the major effects in how long
transmission distance will be made and how good is the received display, the
actual transmission length is subject to your CAT-5/5e/6 cables. For resolution
greater than 1280x1024, a CAT-6 is recommended.
Hardware Installation
Notice
Otros manuales para AT-DVI40SRS
3
Tabla de contenidos
Otros manuales de Extensor de Atlona
Atlona
Atlona AT-HD-V40SRS Manual de usuario
Atlona
Atlona AT-DVIDF40SR Manual de usuario
Atlona
Atlona AT-DVIF20SR Manual de usuario
Atlona
Atlona AT-PRO2HDREC-DA Manual de usuario
Atlona
Atlona AT-VGA-RS300SRS Manual de usuario
Atlona
Atlona AT-AVGA-SR Manual de usuario
Atlona
Atlona AT-PRO2HDREC Manual de usuario
Atlona
Atlona AT-RS232SRS Manual de usuario
Atlona
Atlona AT-USB50-SR Manual de usuario
Atlona
Atlona AT-HDMI40SRS Manual de usuario
Atlona
Atlona AT-PRO2HDREC Manual de usuario
Atlona
Atlona AT-UHD-EX-100CE-RX-PSE Manual de usuario
Atlona
Atlona AT-80120HD Manual de usuario
Atlona
Atlona AT-HD4-SI40SR Manual de usuario
Atlona
Atlona AT-2VGA300SL Manual de usuario
Atlona
Atlona AT-HD-RG100SR Manual de usuario
Atlona
Atlona AT-VGA100-SR Manual de usuario
Atlona
Atlona AT-DVI4-100SR Manual de usuario
Atlona
Atlona AT-VGA-RS300SRS Manual de usuario
Atlona
Atlona AT-DVI40SRS Manual de usuario
