ATI Technologies 2400 - Firemv Tm Rohs,pcie Manual de usuario

FireMVTM 2200

Connecting the Monitor(s)

Your FireMV™ 2200 can drive up to two display devices

simultaneously (analog or digital) and will allow for

independent resolutions.

1. Plug the Y-cable into the DMS-59 connector on the

FireMV™ 2200. Connect the DVI-I cable of your

monitor to the DVI-I “1” connector on the Y-cable. To

connect a VGA monitor to a DVI-I connector, use the

included DVI-I-to-VGA adapter.

2. If using a second display, plug it in to the DVI-I “2”

connector on the Y-cable, using the DVI-I-to-VGA

adapter if necessary. For more information consult

your FireMV™ 2200 User Guide on the installation

CD.

Installing the Card

1. Turn off your computer and monitor(s).

2. Disconnect any existing monitor cable(s) from the

back of your computer.

3. Remove the computer cover. If necessary, consult

your computer manual for assistance.

4. Discharge any static electricity by touching the metal

surface of the computer chassis.

5. Remove any existing graphics card(s) from your

computer. Save any screws used to secure the card.

6. Locate the PCI or PCI Express™ (PCIe) X16 slot, if

necessary, remove the metal backplate cover and

save any screws.

7. Align your FireMV™ card with the PCI or PCI

Express™ X16 slot, then press it in firmly until the

card is fully seated. When handling the card, hold it by

its edges, and avoid touching its circuitry.

8. Replace the screws on the top of bracket to fasten the

card in place.

Installing the Software Drivers

1. Turn on your computer and display device(s).

2. Insert the FireMV™ installation CD.

3. Click on “Install Software” and follow the on-screen

instructions.

4. Open the Windows® Control Panel > Display to

configure your display settings.

Troubleshooting

If you experience any problems during installation, double

check the steps above.

Troubleshooting information may be found on the ATI web

site at ati.com/FireMV.

Your ATI FireMV™ installation CD contains a User’s Guide

in Portable Document Format (PDF). The User’s Guide

describes in detail the features and functions of your ATI

FireMV™ card and the associated software.

Don’t forget to register your new product at:

ati.com/FireMV

FireMVTM 2400

Connecting the Monitor(s)

Your FireMV™ 2400 can drive up to four display devices

simultaneously (analog or digital) and will allow for

independent resolutions.

1. Plug the Y-cable into the VHDCI “A” connector on the

FireMV™ 2400. Connect the first DVI-I cable from

your monitor to the to the DVI-I “Mon 1” connector on

the Y-cable. Connect the second DVI-I cable from

your second monitor to the DVI-I “Mon 2” connector

on the Y-cable. To connect a VGA monitor to a DVI-I

connector, use the included adapter.

2. Plug the Y-cable into the VHDCI “B” connector on the

FireMV™ 2400. Connect the third DVI-I cable from

your monitor to the DVI-I “Mon 3” connector on the Y-

cable. Connect the fourth DVI-I cable from your fourth

monitor to the DVI-I “Mon 4” connector on the Y-cable.

To connect a VGA monitor to a DVI-I connector, use

the included adapter.

Warranty Information

Should your ATI FireMV™ product malfunction within the warranty period, ATI will at its discretion repair or replace the product upon receipt of the product. Any replaced parts

become the property of ATI. This warranty does not apply to the software component of a product or a product which has been damaged due to accident, misuse, abuse,

improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs, or modifications.

For a detailed description of the ATI Hardware Warranty Service Statement visit http://ati.com/online/warranty/statement

Limitations

All warranties for this product, expressed or implied, will expire three (3) years* from date of original purchase. All accompanying cables and accessories are warranted for 90

days. No warranties for this product, expressed or implied, shall extend to any person who purchases the product in a used condition.

The liability of ATI in respect of any defective product will be limited to the repair or replacement of such product. ATI may use new or equivalent-to-new replacement parts.

Defective product will be sent in for repair or replacement only.

ATI makes no other representations or warranties as to fitness for a particular purpose, merchantability or otherwise in respect of the product. No other representations,

warranties or conditions, shall be implied by statute or otherwise.

In no event shall ATI be responsible or liable for any damages, including but not limited to the loss of revenue or profit, arising from the use of the product, or from the loss of

use of the product, as a result of any event, circumstance, action or abuse beyond the control of ATI; whether such damages be direct, indirect, consequential, special or

otherwise and whether such damages are incurred by the person to whom this warranty extends or a third party.

No reproduction of this document in any form is permitted without prior written authorization from ATI Technologies Inc.

All registered trademarks are the property of their respective owners.

P/N 5000028200 Printed in Canada

Quick Installation Guide

ati.com/FireMV

Introduction

This guide provides a quick overview of the steps required to install your new graphics card. Complete documentation for

your FireMV™ card is available as a Portable Document Format (PDF) file on the FireMV™ driver CD, or available for

download at ati.com/FireMV.

Please register your FireMV™ card at ati.com/FireMV. To complete the product registration you will need to know the part

number of FireMV™ card you purchased and the serial number. These numbers are listed on a sticker on the back of the

card, and on the box. For future reference write this information in the space provided below before installing the card:

Part Number: __________________ Serial Number: ____________________ Purchase Date: ___________________

Installation Requirements

•Computer with one available PCI Express™ x16 lane slot or PCI slot for PCI card.

• 128MB of system memory (256MB recommended for better performance).

• CD drive or Internet connection for software driver installation.

• Supported operating systems:

- Windows® 2000 with Service Pack 1 (or higher) or Windows® XP

Customer Care

Advanced technical support for FireMV™ products is

available from ATI’s dedicated frontline support team via

the internet, email or toll free telephone number.

ATI offers an Advanced Parts Replacement Service. For

more details or to request a Return Merchandise

Authorization (RMA) please contact an ATI Customer

Care Representative.

For product information and driver updates visit

ati.com/FireMV.

Contact Information

Internet:

ati.com/FireMV

Phone: North America

1-866-284-2093

or 905-882-2651

(Monday - Friday, 9:00 AM - 7:00 PM EST)

Europe

+49-180-3-347345

(Monday - Friday, 10:30 AM - 19:00 GMT)

Mail:

ATI TECHNOLOGIES INC.

Attention: Customer Care

1 Commerce Valley Drive East

Markham, Ontario

Canada L3T 7X6

Otros manuales para 2400 - Firemv Tm Rohs,pcie

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Tarjeta de video de ATI Technologies

ATI Technologies

ATI Technologies Radeon X1950 Pro Manual de usuario

ATI Technologies

ATI Technologies 9000 - Radeon Pro Manual de usuario

ATI Technologies

ATI Technologies X850 - Radeon Xt Platinum Edition 256 Mb Agp Manual de usuario

ATI Technologies

ATI Technologies X3-256 - 100-505096 FireGL 256MB AGP 4x/8x Dual DVI Graphics... Manual de usuario

ATI Technologies

ATI Technologies X1900 - Radeon XTX 512 MB PCIE Video Card Manual de usuario

ATI Technologies

ATI Technologies V3300 - Firegl Tm Pcie Manual de usuario

ATI Technologies

ATI Technologies RADEON 9500 SERIES Manual de usuario

ATI Technologies

ATI Technologies RADEON 7200 Manual de usuario

ATI Technologies

ATI Technologies FIRE GL 8700 Manual de usuario

ATI Technologies

ATI Technologies All-in-Wonder X800 PCI Express Manual de usuario

ATI Technologies

ATI Technologies Radeon 9700 Series Manual de usuario

ATI Technologies

ATI Technologies X1900GT - Radeon 256MB Pcie Manual de usuario

ATI Technologies

ATI Technologies RADEON 8500 MAC EDITION Manual de usuario

ATI Technologies

ATI Technologies 100-714127 - HD-TV Wonder Manual de usuario

ATI Technologies

ATI Technologies RADEON 117-40122-20 Hoja de especificaciones

ATI Technologies

ATI Technologies RADEONX1900 - G5 Mac Edition ROHS/256MB Pcie Manual de usuario

ATI Technologies

ATI Technologies RADEON X800 PCIe Series Manual de usuario

ATI Technologies

ATI Technologies X1900 - Radeon XTX 512 MB PCIE Video Card Manual de usuario

ATI Technologies

ATI Technologies HD3800 Series Manual de usuario

ATI Technologies

ATI Technologies V7200 - Firegl 256 Mb Pcie Manual de usuario

ATI Technologies

ATI Technologies RADEON X1950 XTX Manual de usuario

ATI Technologies

ATI Technologies Radeon CrossFire Manual de usuario

ATI Technologies

ATI Technologies V7700 - FireGL 512MB PCI Express Manual de usuario

ATI Technologies

ATI Technologies ALL-IN-WONDER PRO Manual

Manuales populares de Tarjeta de video de otras marcas

Gainward

Gainward GeForce GTX 690 4GB Manual de usuario

MSI

MSI N220GT series Manual de usuario

SIIG

SIIG aurora Manual de usuario

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Manual de usuario

MSI

MSI R7850 series Manual de usuario

DVS

DVS Atomix HDMI Manual de usuario

Aztech

Aztech VGS3D-AGP Manual de usuario

Advoli

Advoli TB4 Standard Manual de usuario

ELSA

ELSA ERAZOR III LT Manual de usuario

Gigabyte

Gigabyte GV-R7500L Manual de usuario

Themis

Themis TGA-7000 PMC Manual de usuario

EMS

EMS XtremeRGB-Ex1 Manual de usuario

Nvidia

Nvidia Quadro Workstation Manual de usuario

Pioneer

Pioneer PDA-5003 Manual de usuario

QDI

QDI N2 Manual de usuario

NEC

NEC N8116-48 Manual de usuario

MSI

MSI R7770 PoweR Edition Manual de usuario

Gigabyte

Gigabyte GV-N68T256D Manual de usuario