ATEN VS481 Manual de usuario
User Manual
VS481
Read this guide thoroughly and follow the installation and
operation procedures carefully in order to prevent any damage to
the units and/or any devices that connect to them.
This package contains:
1 User Manual
1 Quick Start Guide
1 VS481 HDMI Switch
1 HDMI Cable (1.8m)
1 IR Remote Control Unit
1 Power Adapter
If anything is damaged or missing, contact your dealer.
Copyright © 2006 ATEN® International Co., Ltd.
Manual Part No. PAPE-1286-100G
Printing Date: 05/2007
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights
reserved. All other trademarks are the property of their respective owners.
vs481a.fm Page 1 Tuesday, May 15, 2007 9:02 AM
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instruction
manual, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.Ifthis equipment does causeharmful interference toradio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from
that which the receiver is connected;
Consult the dealer or an experienced radio/television technician
for help.
This product is RoHS compliant.
vs481a.fm Page 2 Tuesday, May 15, 2007 9:02 AM
- 3 -
Overview
The VS481 4 Port HDMI Switch allows you to quickly and easily
share your HDMI display device with 4 HDMI input sources (one
is conveniently located on the front).
The VS481 allows convenient switching between digital devices
such as DVD players, satellite receivers, video cameras, and
computers (Mac and PC). The VS481 allows you to select the
desired input source via a remote control unit and pushbuttons
located on the switch.
Features
Low cost solution for home theater integration.
Easy switching between four digital video signals (e.g., DVD
and satellite receiver) by remote control or front panel
switches.
LED indication of video source channels.
Supports high resolution: Supports HDTV resolution of 480p,
720p, 1080i and 1080p & Supports VGA, SVGA, SXGA
(1280x1024) and UXGA(1600x1200).
Plug-and-play. No software installation required. Installs in
minutes.
HDCP Compliant
HDMI 1.2 Compliant
Backward compatible with all DVI devices (requires a DVI/
HDMI adapter)
Remote control or front panel pushbutton source selection
vs481a.fm Page 3 Tuesday, May 15, 2007 9:02 AM
- 4 -
System Requirements
Source Device(s)
HDMI Type A output connector(s)
Note: A DVI/HDMI adapter is required when connecting a DVI
source device.
Load Device
A display device or receiver with an HDMI Type A input
connector
Cables
4 HDMI cables
Note: Not all cables are included in this package. We strongly
recommend that you purchase high quality cables of
appropriate length since this will affect the quality of the
audio and video display. Contact your dealer to
purchase the correct cable sets.
Software
The following operating systems are supported:
Microsoft Windows 98SE, Windows ME, Windows 2000,
Windows XP, and later
Red Hat Linux 7.1, 7.2, 7.3, 8.0, and later
Mandrake Linux 9.0 and later
SUSE Linux 8.2 and later
Mac OS 8.6, 9.0, 9.1, X, 10.1, 10.2, 10.3, 10.4, and later
vs481a.fm Page 4 Tuesday, May 15, 2007 9:02 AM
- 5 -
Hardware Overview
VS481 Front View
#Description Function
1 HDMI IN (Type A) Plug the cable from a HDMI source device
into this port (number 4).
2 Port Selection But-
tons Pressing a port selection button routes the
source from the corresponding input port
to the output port for display.
3 IR Receiver The IR receiver receives signals from the
IR remote control.
4 Port LEDs The are two Port LEDs next to each port
selection button. The ON LINE LED (top)
and the SELECTED LED (bottom).
The ON LINE LED (orange) lights to
indicate that the device attached to the
corresponding port is powered on.
The SELECTED LED (green) lights to
indicate that the port is selected.
2
4
31
vs481a.fm Page 5 Tuesday, May 15, 2007 9:02 AM
- 6 -
VS481 Rear View
#Description Function
1 Power Jack The power adapter cable plugs in here.
2 HDMI Out (Type
A) The cable from the HDMI display device
plugs in here.
3 HDMI IN (Type A) The cables from the HDMI source devices
can plug into any of the three available
ports.
321
vs481a.fm Page 6 Tuesday, May 15, 2007 9:02 AM
- 7 -
IR REMOTE CONTROL
#Description Function
1 Port Up / Port
Down Buttons Press the Port Up button to cycle forward
through ports (1 to 2; 2 to 3; 3 to 4; 4 to 1).
Press the Port Down button to cycle
backward through the ports (4 to 3; 3 to 2; 2
to 1; 1 to 4).
2 Port Selection
Buttons Press a button to bring the focus directly to
its associated port.
1
2
vs481a.fm Page 7 Tuesday, May 15, 2007 9:02 AM
- 8 -
Hardware Installation
Before you Begin
Installation of this HDMI switch is simply a matter of plugging in
the appropriate cables.
To install the switch, refer to the installation diagram on the next
page as you perform the following three steps:
1. Use a HDMI cable to connect the HDMI input port on the
video display device to the HDMI output port on the rear of
the switch.
2. Use HDMI cables to connect the HDMI output ports on the
source device(s) to the HDMI input ports on the switch. The
fourth HDMI input port is located on the front of the switch.
3. Plug the provided power adapter into an appropriate AC
power source; plug the power adapter cable into the Power
Jack on the HDMI Switch.
This completes the installation. You may now turn on the display
and source devices.
1. Ensure that all equipment to be connected is
powered off.
2. Make sure that all devices you will be connecting up
are properly grounded.
3. Unplug the power cords of all the computers that
have the Keyboard Power On function.
vs481a.fm Page 8 Tuesday, May 15, 2007 9:02 AM
- 9 -
Installation Diagram
3
1
2
(HDMI)
HDTV
(HDMI)
DVD Player
vs481a.fm Page 9 Tuesday, May 15, 2007 9:02 AM
- 10 -
Source Device Selection
The VS481 HDMI switch offers easy and flexible source device
selection either with the front panel pushbuttons, or with the
remote control.
Note: Whenever the VS481 HDMI switch is powered on, it
automatically selects port 1. You may choose one of the
two methods listed below to select a different port.
Manual Selection
Toselectasourcedevice,pressthe pushbuttonthatcorresponds
to the port it is connected to.
The fourth HDMI input port is located on the front of the switch.
Note: The SELECTED LED (green) light indicates which port is
currently selected.
Remote Control Selection
To select a source device with a remote control, press the
number button that corresponds to the port it is connected to.
Alternatively, you may also cycle through the available source
devices by pushing the Port Up and Port Down buttons on the
remote control unit.
Use the Port Up button to select the next available port in an
ascending order (from left to right on the front view panel).
Use the Port Down button to select the next available port in a
descending order (from right to left on the front view panel).
Note: 1. The maximum range of the remote control unit is 10
meters (30 feet).
2. Aim the remote control unit at the IR receiverlocated on
the front panel of the HDMI Switch. For optimum
performance, make sure there is a clear line-of-sight
between the remote control unit and the IR receiver.
vs481a.fm Page 10 Tuesday, May 15, 2007 9:02 AM
Otros manuales para VS481
2
Tabla de contenidos
Otros manuales de Cambiar de ATEN
ATEN
ATEN ALTUSEN KL1508 Manual del operador
ATEN
ATEN VM7804 Manual de usuario
ATEN
ATEN Altusen KL0116 Manual de usuario
ATEN
ATEN ALTUSEN KL1508A Instrucciones de funcionamiento y mantenimiento
ATEN
ATEN CS-84A Manual de usuario
ATEN
ATEN ALTUSEN KM0832 Manual de usuario
ATEN
ATEN VS-291 Manual de usuario
ATEN
ATEN US221A Manual de usuario
ATEN
ATEN CS-74M Manual de usuario
ATEN
ATEN CN9000 Manual de usuario
ATEN
ATEN US421A Manual de usuario
ATEN
ATEN CS782DP Manual de usuario
ATEN
ATEN Altusen KH1508a Manual de usuario
ATEN
ATEN CS19208 Manual de usuario
ATEN
ATEN CL6708MW Manual de usuario
ATEN
ATEN Petite CS62US Manual de usuario
ATEN
ATEN CS1182DP4C Manual de usuario
ATEN
ATEN KN1000A Manual de usuario
ATEN
ATEN VP2120 Manual de usuario
ATEN
ATEN Altusen KH98 Manual de usuario
