ATEN CS782DP Manual de usuario

CS782DP

USER MANUAL

2-Port USB DisplayPort KVM Switch

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference

to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

The device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this

equipment.

CE Warning: This is a class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to take

adequate measures.

KCC Statement

유선 제품용 / A 급기기 ( 업무용 방송 통신 기기 )

이기기는 업무용 (A 급) 전자파적합기기로서 판매자 또는 사용자는 이점을 주의

하시기 바라며 , 가정 외의 지역에서 사용하는 것을 목적으로 합니다 .

RoHS

This product is RoHS compliant.

SJ/T 11364-2006

The following contains information that relates to China.

- 3 -

CS782DP User Manual

Online Registration

Telephone Support

Technical Support

For international online technical support – including

troubleshooting, documentation, and software updates:

http://eservice.aten.com

For North American technical support:

International http://eservice.aten.com

International 886-2-8692-6959

China 86-10-5255-0110

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

United Kingdom 44-8-4481-58923

Email Support [email protected]

Online

Technical

Support

Troubleshooting

Documentation

Software Updates

http://www.aten-usa.com/support

Telephone Support 1-888-999-ATEN ext 4998

- 4 -

Package Contents

The CS782DP 2-Port USB DisplayPort KVM Switch package

contains the following items:

1 CS782DP 2-Port USB DisplayPort KVM Switch

2 DisplayPort Cables

2 USB Cables

2 Audio Cables

1 Remote Port Selector

1 User Instructions*

Check to make sure that all the components are present and that

nothing got damaged in shipping. If you encounter a problem,

contact your dealer.

Read this manual thoroughly and follow the installation and

operation procedures carefully to prevent any damage to the unit,

and/or any of the devices connected to it.

*Features may have been added to the CS782DP since this

manual was printed. Please visit our website to download the

most up-to-date version of the manual.

Manual Date: 2015-11-20 - Manual Part No. PAPE-1375-AT2G

ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights

reserved. All other trademarks are the property of their respective owners.

- 5 -

Overview

The CS782DP takes a giant step forward from prior digital-

interfaced KVM models by offering DisplayPort functionality, USB

2.0 peripheral sharing (via a USB hub attached to the USB

mouse port), a rich bass experience for 2.1 surround systems

and a firmware upgrade function that allows you to keep up with

latest available versions.

Supporting the latest DisplayPort technology, the CS782DP

offers 4K UHD (3840 × 2160@60Hz) resolution for premium

image quality and vivid high-definition sound for music, movies

and games.

Another new feature of the CS782DP is the implementation of a

remote port selector. This means that you can now control port

switching from the desktop while the switch itself can be placed

in a convenient, out-of-the-way location. Also, in addition to new

hotkeys, the CS782DP offers the latest mouse port-switching

function – simply double-click on the scroll wheel of a USB mouse

to change ports.

Finally, the CS782DP's new Power on detection feature means

that if one of the computers is powered off, the CS782DP will

automatically switch to the other computer if powered-on.

Featuring an unbeatable combination of DisplayPort functionality,

USB 2.0 peripheral sharing convenience and enhanced user-

friendly operations, the CS782DP allows users to keep ahead of

the latest innovations in desktop multimedia and productivity.

- 6 -

Features

One DisplayPort video console controls two USB computers

Fully DisplayPort 1.2 Compliant

Computer selection via remote port selector, hotkeys, and

USB mouse1

Superior video quality – up to 4K UHD (3840 × 2160@60Hz)

Multiplatform support – Windows, Mac, Sun, Linux

HDCP Compliant

Supports MST (Multi-Stream Transport)2, enabling multiple

monitors to be used via a single DisplayPort connector

Supports DisplayPort Dual Mode (DP++)3for directly

outputting single-link DVI or HDMI signals via a powered

DisplayPort-to-HDMI/DVI DP++ adapter

Compatible with widescreen LCD monitors

Power on detection – if either of the computers is powered

off, the CS782DP will automatically switch to the other

computer

Audio-enabled – full bass response provides a rich

experience for 2.1 channel surround sound systems

Supports HD Audio4through DisplayPort playback

Independent switching of the KVM and Audio focus4allows

convenient multi-tasking

Supports multimedia keyboards

Supports wireless keyboards and mice

Console mouse port emulation/bypass feature supports most

mouse drivers and multifunction mice

Mac/Sun keyboard support and emulation5

USB 2.0 mouse port can be used for USB hub and USB

peripheral sharing6

Bus-Powered

Firmware upgradable

- 7 -

Note: 1. Mouse port switching is only supported under mouse

emulation mode and by USB 3-key wheel mice.

2. MST (Multi-Stream Transport) requires either

monitors that are capable of DisplayPort 1.2 daisy-

chaining, or use of a powered DisplayPort MST Hub.

The PC source must be DisplayPort 1.2 compliant.

3. DisplayPort Dual Mode (DP++) requires the use of a

powered DP++ adapter. The graphics source must

be DP++ compliant.

4. HD audio through DisplayPort cannot be switched

independently.

5. 1. PC keyboard combinations emulate Mac/Sun

keyboards. 2. Mac/Sun keyboards work only with

their own computers.

6. This feature may require an extra power adapter to

be connected to the USB hub and that the

CS782DP’s Mouse Emulation Mode be disabled

- 8 -

System Requirements

Console

A DisplayPort monitor capable of the highest resolution that

you will be using on any computer in the installation

A USB Keyboard and a USB Mouse

Speakers (optional)

Computers

The following equipment must be installed on each computer that

is to be connected to the system:

A DisplayPort video port

USB Type A port

Speaker port (optional)

Cables

Two DisplayPort cables, two USB 2.0 cables and two 3.5mm

Audio Jack cables included with the CS782DP package

Operating Systems

Supported operating systems are shown in the table, below:

OS Version

Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10

Linux RedHat 6.0 and higher

SuSE 8.2 and higher

Mandriva (Mandrake) 9.0 and higher

UNIX AIX 4.3 and higher

FreeBSD 3.51 and higher

Sun Solaris 9 and higher

Novell Netware 5.0 and higher

Mac OS 9 and higher

DOS 6.2 and higher

- 9 -

Components

CS782DP

No. Component Description

1 Console Audio Port Your console speakers and microphone plug in here.

2 Console Monitor Port Your console DisplayPort monitor plugs in here.

3 Console Keyboard Port Your console USB keyboard plugs in here.

4 Console Mouse Port Your console USB mouse plugs in here.

5 Remote Port Selector Jack The Remote Port Selector plugs in here.

6 Port LEDs The Port LEDs indicate status.

The LED lights on to indicate that the computer

attached to the corresponding port is selected and has

the KVM focus.

The LED flashes to indicate that the computer

attached to its corresponding port is being scanned by

the Auto Scan function.

The LED is off to indicate the port is not selected.

7 Computer Monitor Port Your computer DisplayPort output plugs in here.

8 Computer Audio Ports Your computer audio output plugs in here.

9 Computer USB Keyboard /

Mouse Port

Your computer USB cable plugs in here.

10 Port Selection Pushbutton Press the Port Selection Pushbutton to toggle the

KVM and Audio focus between the two computers.

PC2 PC1

879

Computer Port 2

978

Computer Port 1

5 2 4

Console Port

- 10 -

Installation

1. Plug your keyboard and mouse into the console Keyboard/

Mouse ports located on the front side of the CS782DP. The

ports are labeled with icons with the mouse port on the top

and the keyboard port on the bottom.

Note: The console mouse connector is a USB 2.0 port and so

can accept any USB compatible peripheral. You can even

connect a hub to install multiple USB devices (this feature

may require an extra power adapter to be connected to

the USB hub and that the CS782DP’s Mouse Emulation

Mode be disabled). See Hotkey Summary Table, page 14

for information.

2. Plug your monitor into the DisplayPort port, located on the

front of the CS782DP. Power on the monitor.

3. Plug your speakers into the console audio port, located on

the front of the CS782DP (Optional).

4. Plug the USB, video and audio connectors of the KVM cables

into their respective PC ports on the CS782DP.

5. Plug the USB, video and audio connectors of the KVM cables

into their respective ports on the computers you are installing.

6. If you choose to use the remote port selector, plug its cable

into the remote port selector female jack, located on the front

of the unit.

7. Power on the computers.

1. Make sure that the power to any device that you

connect to the installation has been turned off. You

must unplug the power cords of any computers that

have the Keyboard Power On function.

2. Make sure that all devices you will be installing are

properly grounded.

Otros manuales para CS782DP

Tabla de contenidos

Otros manuales de Cambiar de ATEN

ATEN

ATEN CS724KM-AT Manual de usuario

ATEN

ATEN VanCryst VM0404H Manual de usuario

ATEN

ATEN ALTUSEN KL1508A Manual de usuario

ATEN

ATEN Petite CS682 Manual de usuario

ATEN

ATEN ALTUSEN KH1508 Manual de usuario

ATEN

ATEN ALTUSEN SN0108 Manual de usuario

ATEN

ATEN CS72U Manual de usuario

ATEN

ATEN VS482B Manual de usuario

ATEN

ATEN ES0152 Manual de usuario

ATEN

ATEN Altusen KN2124V Manual de usuario

ATEN

ATEN Video DinaSyns Manual de usuario

ATEN

ATEN VS-881 Manual de usuario

ATEN

ATEN US3310 Manual de usuario

ATEN

ATEN Altusen RCMDP101U Manual de usuario

ATEN

ATEN Master View CS-1708 Manual de usuario

ATEN

ATEN CS-128A Manual de usuario

ATEN

ATEN CL5808 Manual de usuario

ATEN

ATEN KH1508Ai Manual de usuario

ATEN

ATEN CS22D Manual de usuario

ATEN

ATEN Master View CS-72A Manual de usuario

ATEN

ATEN MASTER VIEW CS-142 Manual de usuario

ATEN

ATEN CS661 Manual de usuario

ATEN

ATEN US3310-AT Manual de usuario

ATEN

ATEN VM7804 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario