ATEN IC164T Manual de usuario

Este manual sirve para los siguientes modelos

2

Tabla de contenidos

Otros manuales de Extensor de ATEN

Manuales populares de Extensor de otras marcas

SY

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario

All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.

Please visit our website to find the most up-to-date version.

IC164 Non-Powered / High Speed Parallel Data Extender

Installation Guide

MISC10000023 04/2021 V1.0

Package Contents

Qty

Description

1

IC164 Non-Powered / High Speed Parallel Data Extender

1

RJ-11 4-wire telephone cable

1

user instructions

Hardware Overview

1. RJ-11 port

2. power jack

3. DB-25 male connector (PC)

4. Centronics 36-pin male connector (printer)

Installation

1. Connect the IC164T’s DB-25 male connector to the PC’s parallel port.

2. Connect one end of the RJ-11 4-wire telephone cable to the RJ-11 port of the IC164T, and then connect the other

end to the RJ-11 port of the IC164R.

3. Connect the IC164R’s Centronics 36-pin male connector to the printer’s parallel port.

4. Power on the printer and PC, and the IC164T and IC164R are now ready to use.

All manuals and user guides at all-guides.com

All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.

Please visit our website to find the most up-to-date version.

Troubleshooting

Problem

Resolution

Failure of data transmission

1. Make sure the RJ-11 4-wire telephone cable is firmly connected to the IC164T

and IC164R.

2. Make sure the printer is powered on and ready to use.

3. The IC164 only extends data transmission from PC to printer. Make sure the

interface of PC and printer are compatible, and use appropriate adapters for

interface conversion if required.

4. The IC164 devices may not have sufficient power supply. Plug a power adapter

of 9V DC, 50mA (min) with positive polarity to the power jack on

the IC164R.

Note: The power adapter is not provided in the package.

5. The problem may be caused by an improper printer reset. Please reset the

IC164R by re-plugging the IC164R from the printer and RJ-11 4-wire telephone

cable from the IC164R.

All manuals and user guides at all-guides.com