ATEN CE-220L Manual de usuario
CONSOLE
REMOTE I /O
AC 9V
CONSOLE
REMOTE I/O
AC 9V
User Manual
CE-220
Read this guide thoroughly and follow the installation and
operation procedures carefully in order to prevent any damage to
the units and/or any devices that connect to them.
This package contains:
1 CE-220L KVM Extender (Local Unit)
1 CE-220R KVM Extender (Remote Unit)
1 Custom KVM Cable
2 Power Adapters
1 User Manual
If anything is damaged or missing, contact your dealer.
Copyright ©2006 ATEN® International Co., Ltd.
Manual Part No. PAPE-1142-200
Printing Date: 11/2006
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights
reserved. All other trademarks are the property of their respective owners.
CE220.fm Page -1 Wednesday, November 22, 2006 10:55 AM
Note: This equipment has been tested and found to
complywiththelimitsforaClassBdigitaldevice,pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the
instruction manual, may cause interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and
receiver;
Connect the equipment into an outlet on a circuit
different from that which the receiver is connected;
Consult the dealer or an experienced radio/television
technician for help.
CE220.fm Page 0 Wednesday, November 22, 2006 10:55 AM
- 1 -
Overview
Because the CE-220 KVM Extender System allows access to a
computer system from a remote console (keyboard, monitor, and
mouse), it is perfect for factory and construction sites, or any type
of installation where the console needs to be in a conveniently
accessible location, but you want thesystemequipment to reside
in a safe place - away from dust, dirt, and harsh environmental
influences.
The CE-220 System is also useful for control and security
purposes, where you can have the system unit in a secure area
at the same time that you put the console in a location that offers
convenient access.
The CE-220 KVM Extender provides the ideal means to access
the remote system box, since it improves on previous designs by
using inexpensive Category 5 cable—the kind commonly used in
Ethernetnetworks—instead ofbulkier,more expensive,standard
cables. Category 5 cabling makes for a much neater, more
convenient, more reliable data transfer connection.
Setup is as easy as can be—simply connect the computer
system box and local console to the Local CE-220 Module; run
the Cat. 5 cable to the Remote CE-220 Module (up to 150 m
away); and plug the remote console into the Remote Module.
Note: You can control numerous remote systems from a single
console by combining the CE-220 with a KVM switch.
CE220.fm Page 1 Wednesday, November 22, 2006 10:55 AM
- 2 -
Features
Inexpensive, reliable, Cat 5 cable to connect the local and
remote units—up to 150 meters apart
Dual console operation—control your system from both the
local and remote PS/2 keyboard, monitor, and mouse
consoles
Push button selection – of the active console
High resolution video – up to 1024 x 768 @ 150 m (max.)
Supports VGA, SVGA, and multisync monitors
Local monitor supports DDC; DDC2
System Requirements
Consoles
A VGA, SVGA, or Multisync monitor capable of the highest
resolution that you will be using on any computer in the
installation
A PS/2 style keyboard
A PS/2 style mouse
Note: 1. If you connect a DDC type monitor to the Local Unit, the
monitor that connects to the Remote Unit must be able
to support the highest video resolution that the DDC
monitor can provide.
2. You must use the same brand and model of mouse on
both the local and remote units.
CE220.fm Page 2 Wednesday, November 22, 2006 10:55 AM
- 3 -
Computers
Thefollowing equipmentmustbe installedon each computerthat
is to be connected to the system:
With PS/2 Type Connectors:
A VGA, SVGA, or Multisync card
A 6-pin mini-DIN mouse port
A 6-pin mini-DIN Keyboard port
With AT Type Connectors:
A VGA, SVGA or Multisync card
A DB-9 (standard serial), mouse port plus mouse adapter
(part # 2A-105)*
A 5-pin DIN (standard AT), keyboard port plus keyboard
adapter (part # 2A-106)*
*Not included - requires separate purchase.
Cables
Although it is possible to use standard KVM cables to link
computers with PS/2 type keyboard and mouse ports to the
CE-220L, for optimal signal integrity, and to simplify the
layout, we strongly recommend that you use the high quality
CS Custom KVM Cable that is provided with this package.
It is not possible to use standard KVM cables to link
computers with AT type keyboard and mouse ports to the CE-
220L. For those computers, CS Custom KVM Cables must be
used.
Category 5 cable is the minimum required to connect the local
and remote CE-220 units. Cable of a lesser standard will
result in degrading the video signal. For best performance, we
strongly recommend Category 5 cable.
CE220.fm Page 3 Wednesday, November 22, 2006 10:55 AM
- 4 -
Components
The Local Unit (CE-220L)
Front View:
#Description Function
1 Operating
ModeSelection
Switch
Pressing this button toggles between the operating
mode choices:
Local: only the local console can control the system(s)
Auto: both consoles can control the system(s).
2 LEDs The Local Unit has two LEDs to indicate the operating
status of the Local and Remote units (see CE-220L
(Local Unit), p. 9).
3 Mouse Port The local PS/2 mouse plugs into this connector.
4 Keyboard Port The local PS/2 keyboard plugs into this connector.
5 Monitor Port The local monitor plugs into this connector.
6 Remote I/O The Cat 5 twisted pair cable that connects to the Remote
Unit plugs into this connector.
7 Range Switch Slide the switch to the Long position if the Remote Unit
is located a long distance away (greater than 30m); slide
the switch to the short position if the Remote Unit is a
short distance away.
8 Power Jack The cable from the AC Power Adapter plugs into this
jack.
1
2
3
4
5
6
7
8
CONSOLE
REMOTE I /O
LONG SHORT
RANGE
AC 9V
CE220.fm Page 4 Wednesday, November 22, 2006 10:55 AM
- 5 -
The Local Unit (CE-220L)
Rear View:
Note: If you are combining the CE-220 with a KVM switch, the
KVM cable connects back to the respective ports on the
Console section of the switch.
#Description Function
1 Monitor Port The HDB-15 Video connector of the KVM cable that
connects to the computer's Video port plugs into this
connector.
2 Keyboard Port The Keyboard connector of the KVM cable that
connects to the computer's Keyboard port plugs into this
connector.
3 Mouse Port The Mouse connector of the KVM cable that connects to
the computer's Mouse port plugs into this connector.
CPU
1
23
CE220.fm Page 5 Wednesday, November 22, 2006 10:55 AM
- 6 -
The Remote Unit (CE-220R)
Front View:
#Description Function
1 LEDs The Remote Unit has two LEDs (Power and On Line) to
indicate the operating status of the Local and Remote
units (see CE-220R (Remote Unit), p. 9).
2 Mouse Port The remote PS/2 mouse plugs into this connector.
3 Keyboard Port The remote PS/2 keyboard plugs into this connector.
4 Monitor Port The remote monitor plugs into this connector.
5 Remote I/O The Cat 5 twisted pair cable that connects back to the
Local Unit plugs into this connector.
6 Power Jack The cable from the AC Power Adapter plugs into this
jack.
CONSOLE
REMOTE I /O
AC 9V
1
2
3
45
6
CE220.fm Page 6 Wednesday, November 22, 2006 10:55 AM
- 7 -
Installation
Setting up the CE-220 KVM Extender system is simply a matter
of plugging in the cables. Refer to the installation diagram on the
following page and do the following:
1. Make sure that all the equipment to be connected up is
powered Off.
2. Plug the cables from the local console devices (mouse,
keyboard, monitor), into their ports on the Console side of the
Local Unit (CE-220L).
3. Plug the appropriate connectors on the KVM cable supplied
with this unit into the CPU side of the CE-220L. Each
connector is marked with an appropriate icon to indicate
which it is.
Note: The female monitor connector is the one that plugs into
the CE-220L.
4. Plug the connectors on the other end of the cable into the
appropriate ports on the computer (or Console section of the
KVM switch if you are using one). Each connector is marked
with an appropriate icon to indicate which it is.
5. Plug either end of the Category 5 twisted pair cable into the
CE-220L's Remote I/O port.
6. Slide the Range Switch to the Long position if the Remote
Unit’s location is more than 30m away; slide it to the Short
position if the Remote Unit’s location is less than 30m away.
7. Plug one of the power adapters (supplied with this package)
into an AC source; plug the adapter's power cable into the
CE-220L's Power Jack
8. Plug the other end of the Category 5 twisted pair cable into
the I/O port of the Remote Unit (CE-220R).
9. Plug the cables from the remote console devices (mouse,
keyboard, monitor), into their ports on the Console side of the
CE-220R.
CE220.fm Page 7 Wednesday, November 22, 2006 10:55 AM
- 8 -
10.Plug the second power adapter (supplied with this package)
into an AC source; plug the adapter's power cable into the
CE-220R's Power Jack.
CE-220L
Rear View
CE-220L
FrontView
CE-220R
CPU
CONSOLE
REMOTE I /O
AC 9V
CONSOLE
REMOTE I /O
LONG SHORT
RANGE
AC 9V
CE220.fm Page 8 Wednesday, November 22, 2006 10:55 AM
Otros manuales para CE-220L
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Extensor de ATEN
ATEN
ATEN ProXime CE750 Manual de usuario
ATEN
ATEN KE6900 Manual de usuario
ATEN
ATEN VanCryst CE820L Manual de usuario
ATEN
ATEN VE1812 Manual de usuario
ATEN
ATEN VE829 Manual de usuario
ATEN
ATEN CE624 Manual de usuario
ATEN
ATEN VE800 Manual de usuario
ATEN
ATEN CE100 Manual de usuario
ATEN
ATEN PAPE-1285-221G Manual de usuario
ATEN
ATEN VanCryst CE820 Manual de usuario
ATEN
ATEN ProXime CE770 Manual de usuario
ATEN
ATEN KX Series Manual de usuario
ATEN
ATEN Altusen KA-9250 Manual de usuario
ATEN
ATEN CE624 Manual de usuario
ATEN
ATEN VanCryst CE820 Manual de usuario
ATEN
ATEN CE800b Manual de usuario
ATEN
ATEN CE790 Guía del usuario
ATEN
ATEN CE250a Manual de usuario
ATEN
ATEN CE350 Manual de usuario
ATEN
ATEN UEH4102 Manual de usuario
