Asus SL1200 Manual de usuario

Quick Installation Guide

SL1200

Internet Security Router

E2959

2ASUS SL1200

Introduction

Thank you for buying the ASUS SL1200, the Internet Security Router!

Your Local Area Network (LAN) will now be able to access the Internet

using high-speed broadband connection such as those with ADSL or cable

modem.

This quick installation guide provides the basic instructions on connecting

your ASUS SL1200 to your PC or LAN, and to the Internet.

System Requirements

• ADSL or cable modem and the corresponding service up and running,

with at least one public Internet address assigned to your WAN

• One or more computers each containing an Ethernet 10Base-

T/100Base-T network interface card (NIC)

• (Optional) An Ethernet hub/switch, if you are connecting the device to

more than four computers on an Ethernet network.

• A web browser such as Netscape 7.0.2, Microsoft Internet Explorer

v5.5 or later.

Package contents

Check your ASUS SL1200 package for these items:

• 1 x ASUS SL1200

• 1 x power adapter

• 1 x straight-through Ethernet cable

• 1 x manual CD

ASUS SL1200

Features

Front Panel

The front panel contains LED indicators that show the status of the unit.

Label Color Function

POWER green On: Unit is powered on

Off: Unit is powered off

WAN green On: WAN link established and active

Flashing: Data is transmitted via WAN connection

Off: No WAN link

LAN1-LAN4 green On: LAN link is established

Flashing: Data is transmitted via LAN connection

Off: No LAN link

Label Function

POWER Connects to the power adapter

Reset Resets the device

CONSOLE RJ-45 serial port for console management

WAN Connects to your WAN device such as ADSL or cable modem.

P1-P4 Connects to the device to your PC’s Ethernet port, or to the

uplink port on your LAN’s hub/switch using the cable.

Rear Panel

The rear panel contains the ports and the power/WAN connectors.

4ASUS SL1200

Quick installation

Hardware connection

Before you begin, turn the power off for all devices.

These include your computer(s), your LAN hub/switch (if

applicable), and the ASUS SL1200.

Step 1: Connect an ADSL or a cable modem

To connect the router

Connect one end of the Ethernet cable to the port labeled WAN on the

rear panel of the device. Connect the other end to the Ethernet port on the

ADSL or cable modem.

Figure 1. Overview of Hardware Connections

ASUS SL1200

Step 2: Connect computers or a LAN

If your LAN has four or less than four computers, you can use an Ethernet

cable to connect computers directly to the built-in switch on the device.

You should attach one end of the Ethernet cable to any of the port labeled

LAN1 – LAN4 on the rear panel of the device and connect the other end to

the Ethernet port of a computer.

If your LAN has more than four computers, you can attach one end of an

Ethernet cable to a hub or a switch, such as an uplink port (refer to the hub

or switch documentations for instructions), and the other to the Ethernet

switch port (labeled LAN1 – LAN4) on the router.

You can use either a crossover or a straight-through

Ethernet cable to connect the built-in switch and computers,

hubs or switches.

Step 3: Attach the power adapter

Connect the power adapter to the POWER connector on the back of the

device and plug the adapter to a wall outlet or a power strip.

Step 4: Turning on the ASUS SL1200

After plugging in, the router will automatically turn on. Turn on your ADSL

or cable modem, your computer(s), and any LAN devices such as hubs or

switches.

LED Indicators

LED Description

POWER Solid green to indicate that the router is turned on. If this light is

not on, check if the power adapter is attached to the router and if

it is plugged into a power source.

LAN1 – LAN4 Solid green to indicate that the router can communicate with

your LAN or flashing when the router is sending or receiving

data from your LAN device(s).

WAN Solid green to indicate that the router has successfully estab-

lished a connection with your ISP or ashing when the device is

sending or receiving data from the Internet.

Check the LED indicators to determine if the hardware

setup is working properly. Refer to the table below.

6ASUS SL1200

Conguring Your Computers

This section provides instructions for conguring the Internet settings on

your computers to work with the router.

Before you begin

By default, the ASUS SL1200 automatically assigns all required Internet

settings to your PCs. You only need to configure the PCs to accept the

information when it is assigned.

In some cases, you may want to congure network settings

manually to some or all of your computers rather than allow

the Internet Security Router to do so. See Assigning static

IP addresses to your PCs on page 10 for instructions.

If you have connected your PC via Ethernet to the router, follow the

instructions that correspond to the operating system installed on your PC.

Windows®XP PCs

1. In the Windows task bar, click Start -> Control Panel.

2. Double-click the Network Connections icon.

3. In the LAN or High-Speed Internet window, right-click on icon

corresponding to your network interface card (NIC) and select Proper-

ties. This icon is often labeled as Local Area Connection

The Local Area Connection dialog box displays with a list of currently

installed network items.

4. Ensure that the check box to the left of the item labeled Internet

Protocol TCP/IP is checked, and click <Properties>.

5. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio

button labeled Obtain an IP address automatically. Also click the radio

button labeled Obtain DNS server address automatically.

6. Click <OK> twice to confirm your changes, and close the Control

Panel.

ASUS SL1200

Windows®2000 PCs

Check for the IP protocol and, if necessary, install it.

1. In the Windows task bar, click Start -> Settings -> Control Panel.

2. Double-click the Network and Dial-up Connections icon.

3. In the Network and Dial-up Connections window, right-click the Local

Area Connection icon, and then select Properties.

The Local Area Connection Properties dialog box displays a list of

currently installed network components. If the list includes Internet

Protocol (TCP/IP), then the protocol has already been enabled. Skip to

step 10.

4. If Internet Protocol (TCP/IP) does not display as an installed

component, click <Install>.

5. In the Select Network Component Type dialog box, select Protocol,

and then click <Add>.

6. Select Internet Protocol (TCP/IP) in the Network Protocols list, and

then click <OK>.

You may be prompted to install files from your Windows 2000

installation CD or other media. Follow the instructions to install the les.

7. If prompted, click <OK> to restart your computer with the new settings.

Next, congure the PCs to accept IP addresses assigned by the router.

8. In the Control Panel, double-click the Network and Dial-up

Connections icon.

9. In Network and Dial-up Connections window, right-click the Local

Area Connection icon, and then select Properties.

10. In the Local Area Connection Properties dialog box, select Internet

Protocol (TCP/IP), and then click <Properties>.

11. In the Internet Protocol (TCP/IP) Properties dialog box, click the

radio button labeled Obtain an IP address automatically. Also click

the radio button labeled Obtain DNS server address automatically.

12. Click <OK> twice to conrm and save your changes, and then close

the Control Panel.

8ASUS SL1200

Windows®95, 98, and Me PCs

1. In the Windows task bar, click Start -> Settings -> Control Panel.

2. Double-click the Network icon.

In the Network dialog box, look for an entry started w/ “TCP/IP ->” and

the name of your network adapter, and then click <Properties>. You

may have to scroll down the list to nd this entry.

If the list includes such an entry, then the TCP/IP protocol has already

been enabled. Skip to step 8.

3. If Internet Protocol (TCP/IP) does not display as an installed

component, click <Add>.

4. In the Select Network Component Type dialog box, select Protocol,

and then click <Add>.

5. Select Microsoft in the Manufacturers list box, and then click TCP/IP in

the Network Protocols list, box and then click <OK>.

You may be prompted to install les from your Windows 95, 98 or Me

installation CD or other media. Follow the instructions to install the les.

6. If prompted, click <OK> to restart your computer with the new settings.

Next, configure the PCs to accept IP information assigned by the

router.

7. In the Control Panel, double-click the Network icon.

8. In the Network dialog box, select an entry started with “TCP/IP ->” and

the name of your network adapter, and then click <Properties>.

9. In the TCP/IP Properties dialog box, click the radio button labeled

Obtain an IP address automatically.

10. In the TCP/IP Properties dialog box, click the Default Gateway tab.

Enter 192.168.1.1 (the default LAN port IP address of the router) in

the New gateway address field and click <Add> to add the default

gateway entry.

11. Click <OK> twice to conrm and save your changes, and then close

the Control Panel.

12. If prompted to restart your computer, click <OK> to do so with the new

settings.

ASUS SL1200

Windows®NT 4.0 workstations

Check for the IP protocol and, if necessary, install it.

1. In the Windows NT task bar, click Start -> Settings -> Control Panel.

2. In the Control Panel window, double click the Network icon.

3. In the Network dialog box, click the Protocols tab.

The Protocols tab displays a list of currently installed network protocols.

If the list includes TCP/IP Protocol, then the protocol has already been

enabled. Skip to step 9.

4. If TCP/IP does not display as an installed component, click <Add>.

5. In the Select Network Protocol dialog box, select TCP/IP, and then

click <OK>.

You may be prompted to install les from your Windows NT installation

CD or other media. Follow the instructions to install the les.

After all files are installed, a window displays to inform you that a

TCP/IP service called DHCP can be set up to dynamically assign IP

information.

6. Click <Yes> to continue, and then click <OK> if prompted to restart

your computer.

Next, congure the PCs to accept IP addresses assigned by the router.

7. Open the Control Panel window, and then double-click the Network

icon.

8. In the Network dialog box, click the Protocols tab.

9. In the Protocols tab, select TCP/IP, and then click <Properties>.

10. In the Microsoft TCP/IP Properties dialog box, click the radio button

labeled Obtain an IP address from a DHCP server.

11. Click <OK> twice to conrm and save your changes, and then close

the Control Panel.

10 ASUS SL1200

Assigning static IP addresses to your PCs

In some cases, you may want to assign IP addresses to some or all of

your PCs directly (often called “statically”), rather than allowing the ASUS

SL1200 to assign them. This option may be desirable (but not required) if:

• You have obtained one or more public IP addresses that you want

to always associate with specic computers (for example, if you are

using a computer as a public web server).

• You maintain different subnets on your LAN.

However, during the rst time conguration of your router, you must

assign an IP address in the 192.168.1.0 network for your PC, such

as 192.168.1.2. This is in order to establish connection between

the router and your PC as the default LAN IP on the router is pre-

congured as 192.168.1.1. Enter 255.255.255.0 for the subnet mask

and 192.168.1.1 for the default gateway. These settings may be

changed later to reect your true network environment.

On each PC to which you want to assign static information, follow the

instructions on pages 6 to 9 relating only to checking for and installing

the IP protocol. Once it is installed, continue to follow the instructions

for displaying each of the Internet Protocol (TCP/IP) properties.

Instead of enabling dynamic assignment of the IP addresses for the

computer, DNS server, and default gateway, click the radio buttons

that enable you to enter the information manually.

Your PCs must have IP addresses that place them in the

same subnet as the Internet Security Router’s LAN port. If

you want to manually assign IP information to all your LAN

PCs, you can follow the instructions in Conguring the

LAN IP Address.

Conguring the LAN IP Address

To change the default LAN IP address

1. Log into the Configuration Manager as administrator, and then click

LAN -> IP. The IP Address conguration page is displayed as shown in

Figure 2.

Otros manuales para SL1200

Tabla de contenidos

Otros manuales de Enrutador de red de Asus

Asus

Asus DSL-AC51 Manual de usuario

Asus

Asus RX3041 V2 Manual de usuario

Asus

Asus RT-AC56S Manual de usuario

Asus

Asus RT-N19 Manual de usuario

Asus

Asus RT-AC56U Manual de usuario

Asus

Asus RT-AC750L Manual de instrucciones

Asus

Asus WL-500gP V2 Manual de usuario

Asus

Asus Republic of Gamers GT-AC2900 Manual de usuario

Asus

Asus RT-AXE7800 Manual de usuario

Asus

Asus RT-AXE7800 Manual de usuario

Asus

Asus EBG19P Manual de usuario

Asus

Asus Aaeon FWS-2260 Manual de usuario

Asus

Asus RT-ACRH12 Manual de usuario

Asus

Asus WL-700GE - Wireless Router Manual de usuario

Asus

Asus WL-500gP Manual de usuario

Asus

Asus WL-AM604 Manual de usuario

Asus

Asus RT-AC58U Manual de usuario

Asus

Asus RT-AC1300G PLUS Manual de usuario

Asus

Asus DSL-AC88U Manual de usuario

Asus

Asus TriplePlay Manual de usuario

Asus

Asus RT-AC1200GU Manual de usuario

Asus

Asus GT-AC9600 Manual de usuario

Asus

Asus AX5400 Manual de usuario

Asus

Asus Wireless-N600 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad