Asus SpaceLink Manual de usuario

ASUS SpaceLink PC CARD

Quick Start Guide

No part of this manual, including the products and software described in it, may be

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into

any language in any form or by any means, except documentation kept by the

purchaser for backup purposes, without the express written permission of ASUSTeK

COMPUTER INC. (“ASUS”).

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY

KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PUR-POSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY

INDIRECT, SPE-CIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS

OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF

ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

Product warranty or service will not be extended if: (1) the product is re-paired,

modified or altered, unless such repair, modification of alteration is authorized in

writing by ASUS; or (2) the serial number of the product is defaced or missing.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for

identification or explanation and to the owners’ benefit, without intent to infringe.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE

FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO

CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE

CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES

THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND

SOFTWARE DESCRIBED IN IT.

Safety Statements

Federal Communications Commission Statement

This device complies with FCC Rules Part 15. Operation is subject to the following

two conditions:

ŸThis device may not cause harmful interference, and

ŸThis device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the Federal Communications Commission (FCC)

rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

ŸReorient or relocate the receiving antenna.

ŸIncrease the separation between the equipment and receiver.

ŸConnect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

ŸConsult the dealer or an experienced radio/TV technician for help.

WARNING! The use of a shielded-type power cord is required in order to

meet FCC emission limits and to prevent interference to the nearby radio

and television reception. It is essential that only the supplied power cord be

used. Use only shielded cables to connect I/O devices to this equipment. You

are cautioned that changes or modifications not expressly approved by the

party responsible for compliance could void your authority to operate the

equipment.

Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washing-ton

DC: Office of the Federal Register, National Archives and Records Administration,

U.S. Government Printing Office.

Canadian Department of Communications

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the Canadian

Department of Communications.

This Class B digital apparatus complies with Canadian ICES-003. Cet

appareil numérique de la classe B est conforme à la norme NMB-003 du

Canada.

Installation

Installing the SpaceLink PC Card Driver

1. Turn ON your computer and enter Windows.

2. Insert the ASUS SpaceLink PC Card into a PCMCIA Type II slot with the

connector side first. The “LNK” and “AIR” LEDs represent the top side and the

“MAC” address sticker represents the bottom side. Push the PC Card into the slot

until it is firmly seated.

CAUTION: Do not force a misaligned PC Card into the slot. Forcing it will

damage the PC Card or the computer.

3. Windows will automatically detect the ASUS SpaceLink PC Card once it is

inserted into the PCMCIA slot, then the Add New Hardware Wizard dialog

appears. Click Next.

4. Select Search for the best driver for your device (Recommended). Click Next.

5. Specify the location of driver files that match your operation system. Click Next.

Windows 98 –[CD]:\Driver\Win98

Windows Me –[CD]:\Driver\WinMe

Windows 2000 –[CD]:\Driver\Win2K

Windows XP –[CD]:\Driver\WinXP

Where [CD] represents the driver letter of your CD-ROM device.

6. Wait while Windows searches for the device driver for the PC Card. It will display

the search result Windows driver file search for the device: “ASUS SpaceLink

WL-100 WLAN PC Card”. Click Next.

7. During the installation, Windows may prompt to insert the “Windows CD”, which

contains some driver files. Type the “Windows CD” path and click Yes. Windows

will start copying the necessary files.

8. When the installation procedure is completed, click Finish.

9. When prompted, reboot your computer.

Verifying the SpaceLink PC Card Installation

ŸRight-click My Computeron the desktop and select Properties. Click Device

Manager and look under Network adapters. If you find the ASUS SpaceLink

WL-100 WLAN PC Card string, it means the PC Card installed correctly.

ŸRight-click My Network Places on the desktop and select Properties. Scroll

down and look for “TCP/IP -> ASUS SpaceLink WL-100 WLAN PC Card”.

Make sure that the TCP/IP protocol parameters (IP address, gateway, and subnet

mask) are set correctly.

Installing the SpaceLink PC Card Utilities

After you have installed the PC Card driver, you can install the wireless LAN utilities.

Refer to the User Manual for the detail configuration of each utility.

1. Insert the ASUS SpaceLink PC Card support CD and an autorun menu will appear.

If your autorun is disabled, double click SETUP.EXE in the root directory of the

support CD.

2. From the autorun menu, click Install ASUS WLAN Card Utilities.

3. Follow the on-screen instructions to complete the installation.

Reading the SpaceLink PC Card LEDs

The part of the ASUS SpaceLink PC Card that protrudes out of the PCMCIA socket

consists of two LEDs that indicate the status of the ASUS SpaceLink PC Card.

Air LED

The Air LED indicates that there are packets being transmitted.

Link LED

The Link LED is used to indicate the status of the ASUS SpaceLink PC Card.

ŸSolid Green: Card associates with an Access Point.

ŸBlinking: Card attempts to associate with an Access Point.

ŸOff: There are errors during the Power-ON Self-Test.

Orientating the Antenna

The ASUS SpaceLink PC Card has two integrated antennas, one external

omni-directional antenna and the other is a built-in diversity antenna. It is

recommended that you adjust the external antenna straight up for maximum range and

higher link quality. Lower the external antenna when transporting your Notebook PC.

Tabla de contenidos

Otros manuales de Hardware de computadora de Asus

Asus

Asus AAEON UP Squared i12 Edge Manual de usuario

Asus

Asus ROG RYUJIN Series Manual de usuario

Asus

Asus ASMB3-IKVM Manual de usuario

Asus

Asus TUF B365-PLUS GAMING Manual de usuario

Asus

Asus Triton 79 Manual de usuario

Asus

Asus BOXER-8222AI-B Manual de operación

Asus

Asus PEB-10G Manual de usuario

Asus

Asus AAEON NET-PLUS Manual de usuario

Asus

Asus LSISAS RAID Card PIKE 1064E Manual de usuario

Asus

Asus Q16328 Manual de usuario

Asus

Asus ROG STRIX LC II ARGB Series Manual de usuario

Asus

Asus X-Mars Lite Manual de usuario

Asus

Asus PIKE II 3108 Series Manual de usuario

Asus

Asus CMI8330 Manual de usuario

Asus

Asus Aaeon NanoCOM-EHL Manual de usuario

Asus

Asus ASMB6-IKVM Manual de usuario

Asus

Asus AAEON BOXER-6406-ADN Manual de usuario

Asus

Asus AAEON PICO-BT01 Manual de usuario

Asus

Asus AAEON BOXER-6751-ADP Manual de usuario

Asus

Asus Aaeon UPN Edge Pro Manual de usuario

Asus

Asus Aaeon BOXER-6451-ADP Manual de usuario

Asus

Asus ROG Front Base Manual de usuario

Asus

Asus AAEON GENESYS-CML5 Manual de usuario

Asus

Asus PIKE 2208 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario