Asus ASMB3-IKVM Manual de usuario

ASMB3-IKVM

Server Management Board

E3730

First Edition V1

April 2008

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Contents ...................................................................................................... iii

Notices.......................................................................................................... v

Safety information ...................................................................................... vi

About this guide ........................................................................................ vii

ASMB3-IKVM specications summary..................................................... ix

Chapter 1: Product introduction

1.1 Welcome! ...................................................................................... 1-2

1.2 Package contents......................................................................... 1-2

1.3 Features ........................................................................................ 1-2

1.4 Board layout ................................................................................. 1-4

1.5 System requirements................................................................... 1-4

1.6 Network setup .............................................................................. 1-5

Chapter 2: Installation

2.1 Before you proceed ..................................................................... 2-2

2.2 Hardware installation................................................................... 2-2

2.3 Firmware update .......................................................................... 2-5

2.4 BIOS conguration ...................................................................... 2-6

2.4.1 AMI BIOS setup .............................................................. 2-6

2.4.2 Phoenix BIOS setup........................................................ 2-9

2.5 Running the KIRARARI utility ................................................... 2-13

2.5.1 Updating the ASMB3-IKVM rmware............................ 2-14

2.5.2 Conguring the LAN controller...................................... 2-15

2.5.3 Conguring the user name and password .................... 2-16

Chapter 3: Software support

3.1 Web-based user interface ........................................................... 3-2

3.1.1 Loging in the utility .......................................................... 3-2

3.1.2 Home page ..................................................................... 3-3

3.1.3 Remote Control............................................................... 3-4

3.1.4 Virtual Media ................................................................... 3-7

3.1.5 System Health................................................................3-11

3.1.6 User Management ........................................................ 3-14

3.1.7 KVM Settings ................................................................ 3-16

Contents

3.1.8 Device Settings ............................................................. 3-17

3.1.9 Maintenance ................................................................. 3-24

Appendix: Reference information

A.1 LAN port for server management...............................................A-2

A.2 BMC socket...................................................................................A-3

A.3 Troubleshooting ...........................................................................A-4

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with manufacturer’s

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modications

to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

Safety information

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the server.

•

When adding or removing devices to or from the server, ensure that the power

cables for the devices are unplugged before the signal cables are connected. If

possible, disconnect all power cables from the existing server before you add a

device.

•

Before connecting or removing signal cables from the server, ensure that all

power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your area. If

you are not sure about the voltage of the electrical outlet you are using, contact

your local power company.

•

If the power supply is broken, do not try to x it by yourself. Contact a qualied

service technician or your retailer.

Operation safety

•

Before installing any component to the server, carefully read all the manuals

that came with the package.

•

Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the product in

any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualied

service technician or your retailer.

This symbol of the crossed out wheeled bin indicates that the product (electrical,

electronic equipment, and mercury-containing button cell battery) should not

be placed in municipal waste. Check local regulations for disposal of electronic

products.

vii

About this guide

This user guide contains the information you need when installing and conguring

the server management board.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the server management board features and the new

technologies it supports.

• Chapter 2: Installation

This chapter provides instructions on how to install the board to the server

system and install the utilities that the board supports.

• Chapter 3: Software support

This chapter tells you how to use the web-based user interface that the

server management board supports.

• Appendix: Reference Information

The Appendix shows the location of the IKVM LAN port for server

management and BMC socket on several motherboards. This section also

presents common problems that you may encounter when installing or using

the server management board.

Where to nd more information

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and

software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty

yers, that may have been added by your dealer. These documents are not

part of the standard package.

viii

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign means

that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or

Return key.

<Key1+Key2+Key3> If you must press two or more keys simultaneously, the key

names are linked with a plus sign (+).

Example: <Ctrl+Alt+D>

Command Means that you must type the command exactly as shown,

then supply the required item or value enclosed in

brackets.

Example: At the DOS prompt, type the command line:

format a:

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT: Instructions that you MUST follow to complete a

task.

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the following

symbols used throughout this manual.

ASMB3-IKVM specications summary

Chipset KIRA100

Internal RAM 256 Mb for system

256 Mb for video

Internal ROM 64 Mb

Timers 32-bit Watchdog Timer

System interface Supports Keyboard Controller Style (KCS)

LAN type 10/100 Mbps Dedicated LAN

LED 1 x BMC heartbeat

Bus 2 x I2C bus

1 x LPC bus

2 x UART bus (debug only)

1 x DVO bus

1 x LAN interface

Main features IPMI 2.0-compliant and supports

KVM over LAN

Web-based user interface (remote management)

Virtual media

Form factor 2.66” x 1.48”

* Specications are subject to change without notice.

Tabla de contenidos

Otros manuales de Hardware de computadora de Asus

Asus

Asus CMI8330 Manual de usuario

Asus

Asus C-P55T2D Manual de usuario

Asus

Asus Aaeon de next-TGU8 Manual de usuario

Asus

Asus U3S6 Manual de usuario

Asus

Asus SpaceLink WL-100 Manual de usuario

Asus

Asus NFX Express Manual de usuario

Asus

Asus C-PKND Manual de usuario

Asus

Asus AAEON UP Squared Pro Edge Manual de usuario

Asus

Asus Aaeon PICO-V2K4-SEMI Manual de usuario

Asus

Asus SpaceLink WL-100 Manual de usuario

Asus

Asus Xonar HDAV Slim Manual de usuario

Asus

Asus ASMB6-IKVM Manual de usuario

Asus

Asus WL-120 Manual de usuario

Asus

Asus Aaeon NanoCOM-EHL Manual de usuario

Asus

Asus V52 Manual de usuario

Asus

Asus AAEON GENE-TGU6 Manual de usuario

Asus

Asus AAEON UP Squared i12 Edge Manual de usuario

Asus

Asus AAEON PICO-TGU4-SEMI Manual de usuario

Asus

Asus AAEON PER-T481 Manual de usuario

Asus

Asus ROG STRIX LC RGB Series Manual de usuario

Asus

Asus AAEON GENE-APL7 Manual de usuario

Asus

Asus Aaeon PCM-CFS Manual de usuario

Asus

Asus SpaceLink Manual de usuario

Asus

Asus PE200U Series Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario