Asus ROG SWIFT PRO Manual de usuario

Second Edition

July 2023

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Notices......................................................................................................... iv

Safety information ....................................................................................... v

Care & Cleaning.......................................................................................... vi

Takeback Services..................................................................................... vii

Product information for EU energy label................................................. vii

Chapter 1: Product introduction

1.1 Welcome! ...................................................................................... 1-1

1.2 Package contents......................................................................... 1-1

1.3 Monitor introduction .................................................................... 1-2

1.3.1 Front/Side view ............................................................... 1-2

1.3.2 Back view........................................................................ 1-3

1.3.3 G-SYNC HDR ................................................................. 1-4

Chapter 2: Setup

2.1 Assembling the monitor arm/base ............................................. 2-1

2.2 Cable management ...................................................................... 2-1

2.3 Adjusting the monitor.................................................................. 2-2

2.4 Detaching the arm (for VESA wall mount)................................. 2-3

2.5 Connecting the cables................................................................. 2-4

2.6 Turning on the monitor................................................................ 2-4

Chapter 3: General instructions

3.1 OSD (On-Screen Display) menu ................................................. 3-1

3.1.1 How to recongure.......................................................... 3-1

3.1.2 OSD function introduction ............................................... 3-2

3.2 Aura............................................................................................. 3-11

3.3 Specicationssummary............................................................ 3-12

3.4 Outline dimensions.................................................................... 3-14

3.5 Troubleshooting (FAQ).............................................................. 3-15

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modications

to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

This Class B digital apparatus meets all requirements of the Canadian Interference

- Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement

sur le matériel brouiller du Canada.

Safety information

• Before setting up the monitor, carefully read all the documentation that came

with the package.

• To prevent re or shock hazard, never expose the monitor to rain or moisture.

• Never try to open the monitor cabinet. The dangerous high voltages inside the

monitor may result in serious physical injury.

• If the power supply is broken, do not try to x it by yourself. Contact a qualied

service technician or your retailer.

• Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

• Slots and openings on the back or top of the cabinet are provided for

ventilation. Do not block these slots. Never place this product near or over a

radiator or heat source unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated

on the label. If you are not sure of the type of power supply to your home,

consult your dealer or local power company.

• Use the appropriate power plug which complies with your local power standard.

• Do not overload power strips and extension cords. Overloading can result in

re or electric shock.

• Avoid dust, humidity, and temperature extremes. Do not place the monitor in

any area where it may become wet. Place the monitor on a stable surface.

• Unplug the unit during a lightning storm or if it will not be used for a long period

of time. This will protect the monitor from damage due to power surges.

• Never push objects or spill liquid of any kind into the slots on the monitor

cabinet.

• To ensure satisfactory operation, use the monitor only with UL listed computers

which have appropriate congured receptacles marked between 100-240V AC.

• If you encounter technical problems with the monitor, contact a qualied service

technician or your retailer.

• Adjustment of the volume control as well as the equalizer to other settings

than the center position may increase the ear-/headphones output voltage and

therefore the sound pressure level.

• Ensure to connect the power cord to a socket-outlet with earthing connection.

• The supplied power adapter and/or power cable are designed to use with the

product only. Do not use with other products.

• The adapter is only used for this monitor, do not use it for other purpose.

Your device uses one of the following power supplies:

- Manufacturer: Delta Electronics Inc., Model: ADP-90LE BD

This symbol of the crossed out wheeled bin indicates that the product (electrical,

electronic equipment, and mercury-containing button cell battery) should not

be placed in municipal waste. Please check local regulations for disposal of

electronic products.

Prevent Tipping

When using the display, fasten the LCD to a wall using a cord or chain that

can support the weight of the monitor in order to prevent the monitor from

falling.

Cord

M4 or M6 screw

Cord or chain

vii

• Display design may differ from those illustrated.

• Installing must be done by a qualied technician, and please contact

your supplier for more information.

• For the models with net weight >=7kg. Please select the suitable

way to prevent tipping.

• For the models with VESA mount, please use method

, install

the screws with ring to the VESA mount hole, then tie the cord or

chain to the wall. Otherwise, please use method

to tie the cord

or chain to the stand and then x it to the wall.

AEEEyönetmeliğineuygundur

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables

and power cord. Follow the correct lifting techniques when positioning the

monitor. When lifting or carrying the monitor, grasp the edges of the monitor.

Do not lift the display by the stand or the cord.

• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor

surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed

with a cloth dampened with mild cleaner.

• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended

for use with the monitor. Never spray cleaner directly on the screen, as it may

drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• The screen may icker during the initial use due to the nature of the uorescent

light. Turn off the Power Switch and turn it on again to make sure that the

icker disappears.

• You may find slightly uneven brightness on the screen depending on the

desktop pattern you use.

• When the same image is displayed for hours, an afterimage of the previous

screen may remain after switching the image. The screen will recover slowly or

you can turn off the Power Switch for hours.

• When the screen becomes black or ashes, or cannot work anymore, contact

your dealer or service center to x it. Do not repair the screen by yourself!

viii

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to

complete a task.

CAUTION: Information to prevent damage to the components when trying

to complete a task.

IMPORTANT: Information that you MUST follow to complete a task.

NOTE: Tips and additional information to aid in completing a task.

Wheretondmoreinformation

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS websites worldwide provide updated information on ASUS

hardware and software products. Refer to http://www.asus.com

2. Optional documentation

Your product package may include optional documentation that may have

been added by your dealer. These documents are not part of the standard

package.

3. About Flicker

https://www.asus.com/Microsite/display/eye_care_technology/

Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest

standards for protecting our environment. We believe in providing solutions for

our customers to be able to responsibly recycle our products, batteries and other

components as well as the packaging materials.

Please go to http://csr.asus.com/english/Takeback.htm for detail recycling

information in different region.

Product information for EU energy label

PG248QP

1-1ASUS ROG Swift Pro PG248QP Series LCD Monitor

1.1 Welcome!

Thank you for purchasing the ASUS®LCD monitor!

The latest widescreen LCD monitor from ASUS provides a broader, brighter and

crystal-clear display, plus a host of features that enhance your viewing experience.

With these features, you can enjoy the convenience and delightful visual

experience that the monitor brings to you!

1.2 Package contents

Check your package for the following items:

LCD monitor

Monitor base

Quick start guide

Warranty card

Power adapter

Power cord

DP cable

HDMI cable

USB cable

Input/Output port cover

Color Calibration Testing Report

ROG Welcome card with envelope

ROG sticker

If any of the above items is damaged or missing, contact your retailer

immediately.

Select “ON” when you see the message “AURA” appears if you want to turn on

the light on the rear cover. If you disable this function but later wish to reactivate

it, please use the OSD menu to turn it on.

The monitor’s Gsync module may continue to operate after the monitor is turned

off. When the DisplayPort Deep Sleep and HDMI Deep Sleep functions are

“ON“, the Gsync module will stop after 3 minutes when you turn off the monitor.

1-2 Chapter 1: Product introduction

1.3 Monitor introduction

1.3.1 Front/Side view

1. ( 5-way) button

• Turns on the OSD menu. Enacts the selected OSD menu item.

• Increases/Decreases values or moves your selection up/down/left/right.

• Turns on the OSD menu when the monitor enters standby mode or

displays the “NO SIGNAL“ message.

2. button

• Exits the OSD menu item.

• Toggles the Key Lock function between on and off with a long press for 5

seconds.

• Turns on the OSD menu when the monitor enters standby mode or

displays the “NO SIGNAL“ message.

button

• Default: GamePlus.

• To change the shortcut function, go to the Shortcut > Shortcut 1

menu.

• Turns on the OSD menu when the monitor enters standby mode or

displays the “NO SIGNAL“ message.

button

• Default: GameVisual.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de Asus

Asus

Asus ThunderboltEX II Manual de usuario

Asus

Asus Aaeon PICO-V2K4-SEMI Manual de usuario

Asus

Asus SpaceLink Manual de usuario

Asus

Asus AAEON GENE-BT05 Manual de usuario

Asus

Asus AAEON FWS-2253 Manual de usuario

Asus

Asus AAEON UP Squared Pro 7000 Manual de usuario

Asus

Asus AAEON GENESYSM-TGU6 Manual de usuario

Asus

Asus S370 Manual de usuario

Asus

Asus PIKE 6480 Manual de usuario

Asus

Asus AAEON EPIC-ADS7-PUC Manual de usuario

Asus

Asus USB 3.1 TYPE-C CARD Manual de usuario

Asus

Asus NFC EXPRESS Manual de usuario

Asus

Asus AAEON EPIC-TGH7 Manual de usuario

Asus

Asus Aaeon UP Xtreme i11 EDGE Manual de usuario

Asus

Asus LSISAS RAID Card PIKE 1064E Manual de usuario

Asus

Asus Aaeon EPIC-BT07 Manual de usuario

Asus

Asus HDAV1.3 - Xonar Slim Sound Card Manual de usuario

Asus

Asus X-Mars Lite Manual de usuario

Asus

Asus Aaeon GENE-ADP6 Manual de usuario

Asus

Asus TUF GAMING LC 240 ARGB Manual de usuario

Asus

Asus AAEON UP Xtreme i12 Manual de usuario

Asus

Asus Star Ice Manual de usuario

Asus

Asus USB-BT211 Mini Bluetooth Dongle Manual de usuario

Asus

Asus LSISAS RAID Card PIKE 1064E Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario