Asoka Plugline PL7667-ETH Manual de usuario
PlugLine Smart Energy AV Ethernet
66-0366-01Rev.003
User’s Guide
PL7667-ETH
Asoka® User Guide
PlugLink PL7667-ETH
Page 2 of 33
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE
SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND
RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY
FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET
FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED
HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED
WARRANTY, CONTACT YOUR ASOKA REPRESENTATIVE FOR A COPY.
The following information is for FCC compliance of Class A devices: This equipment has been
tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio-frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case users will be required to correct the interference at their own
expense.
Modifying the equipment without Asoka’s written authorization may result in the equipment no
longer complying with FCC requirements for Class A digital devices. In that event, your right to
use the equipment may be limited by FCC regulations, and you may be required to correct any
interference or radio or television communications at your own expense.
You can determine whether your equipment is causing interference by turning it off. If the
interference stops, it was probably caused by the Asoka equipment or one of its peripheral
devices. If the equipment causes interference to radio or television reception, try to correct the
interference by using one or more of the following measures:
Turn the television or radio antenna until the interference stops.
Move the equipment to one side or the other of the television or radio.
Move the equipment farther away from the television or radio.
Plug the equipment into an outlet that is on a different circuit from the television or radio.
(That is, make certain the equipment and the television or radio is on circuits controlled by
difference circuit breakers or fuses.)
Modifications to this product not authorized by Asoka could void the FCC approval and negate
your authority to operate the product.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF
THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. ASOKA DISCLAIM ALL WARRANTIES,
EXPRESSED OR IMPLED, INCLUDING, WITHOUT LIMITATION, THOSE OR MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING,
USAGE OR TRADE PRACTICE.
Asoka® User Guide
PlugLink PL7667-ETH
Page 3 of 33
IN THE EVENT SHALL ASOKA BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO
DATA ARISING OUT OF THE USE OF INABILITY TO USE THIS MANUAL, EVEN IF ASOKA HAVE BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Revision
Date
Description
66-0366-01Rev.003 Sep.2013 Release
Table of Contents
Chapter Title Page
1 Introduction
5
2 Important Safety Instructions for the PlugLink 7
3 Overview 8
4 Installation 11
5 Getting Started with the PlugLink 15
6 Basic PL7667-MST Configuration 19
7 PL7667-MST Administration 22
8
Reset and network of PLC 26
Appendix A
Quick Guide to the PlugLink Default Settings 29
Asoka® User Guide
PlugLink PL7667-ETH
Page 5 of 33
Chapter 1
Audience
This guide is designed as a reference for the networking or computer technician responsible for
installing a PlugLink PL7667-ETH, hereafter referred to as the gateway. It is assumed that you are
familiar with and have a working knowledge of the concepts and terminology associated with
Ethernet and local area networking.
Purpose
This guide describes the hardware and software features of the PlugLink PL7667-ETH. It describes
the physical and performance characteristics of the PL 7667-ETH, explains how to install and
configure the PL7667-ETH, and provides troubleshooting information and specifications.
Conventions
This guide employs the conventions described below to convey instructions and information.
Command descriptions use the following conventions:
Commands and keywords are in italic text.
Arguments for which you supply values are in bold.
Square brackets ([ ]) indicate optional elements.
Braces ({ }) group require choices and vertical bars (|) separate the alternative elements.
Braces and vertical bars within square brackets ([{|}]) indicate a required choice within an
optional element.
Interactive examples use the following conventions:
Terminal sessions and system displays are in normal screen font.
Information to be entered in is in bold text.
Notes, cautions and tips use these conventions and symbols:
Means reader take note. Notes contain helpful suggestions or
references to materials not contained in this manual.
Means reader be careful. In this situation, you might do something that
could result in equipment damage or loss of data.
Means the following will help you solve a problem. The tips information
might not be troubleshooting or even an action, but could be useful
information.
Obtaining Documentation
Asoka® User Guide
PlugLink PL7667-ETH
Page 6 of 33
You can access the most current PlugLink™ documentation on the Asoka website at this URL:
http://www.asokausa.com
Document Feedback
You can submit comments via email to custserv@asokausa.com
You can also submit your comments via regular mail by writing to the following address:
Asoka USA Corporation
Attn: Customer Service,
2620 Augustine Drive Suite 230
Santa Clara, CA 95054 USA
USA
We appreciate your comments.
Asoka® User Guide
PlugLink PL7667-ETH
Page 7 of 33
Chapter 2
Important Safety Instruction for the PlugLink PL7667-ETH
The following precautions should be taken when using this product:
Read all instructions before installing and operating this product.
Do not open the cover on this product and/or alter this product in any way.
Follow common household electrical safety practices.
If you have any questions or concerns regarding these safety measures, please contact
Friday from 9:00 am to 5:00 pm PST (excluding holidays.)
Asoka® User Guide
PlugLink PL7667-ETH
Page 8 of 33
Chapter 3
Overview
This chapter provides information about the following topics:
Features
Package Contains
Front Panel Description
Rear Panel Description
Features
PlugLink 7667–ETH features:
Utilizes the existing electrical wiring to distribute data services
IEEE 802.3, 802.3u, 802.3x, 802.3z/ab, 802.1q
One auto-negotiating 10/100BASE-T Ethernet port
Status LEDs showing Ethernet activity and link status
Up to 200Mbps of data transmission
Energy control
Package Contains
Open the package and check that you have all the following items:
1. PlugLink PL7667-ETH
2. 6’ Ethernet cable
3. Warranty and Support Information Card
If any of the parts are incorrect, missing, or damaged, please contact the retailer where you
made your purchase. Keep the carton, including the original packing materials, in case you
need to return the unit for repair.
The Top Panel
The top panel of the PL7667 contains one power switch. See Figure 3-1.
Asoka® User Guide
PlugLink PL7667-ETH
Page 9 of 33
Figure 3-1: PL7667-ETH Top Panel
The Front Panel
The front panel of the PL7667 contains the one Power Outlet.
Figure 3-2: PL7667-ETH Front Panel
Asoka® User Guide
PlugLink PL7667-ETH
Page 10 of 33
Side Panel
You can use the status lights to verify connections. Viewed from top to bottom, the table bellow
describes the lights on the side panel of the unit.
Table 3-1: Status Light Descriptons
Power On
Off Device is powered on
Device has no power
PLC Activity Blinking Red
Blinking Yellow
Blinking Green
Off
Low Connection
Good Connection
Excellent Connection
No Connection
ETH Link On
Blinking
Off
Ethernet Connectivity
Ethernet Traffic
No Ethernet Connectivity
The Bottom Panel
The bottom panel of the PL7667-ETH contains one (1) Ethernet ports as shown below.
Figure 3-2: PL7667-ETH Bottom Panel
The Rear Panel
The rear panel is where the product label is located. The product label contains the items listed
below.
Model number
Unique device password(PLC DAK)
Powerline MAC Address(PLC MAC)
Ethernet MAC Address
Serial number
For future convenience, please write this information down in your
Warranty Support Information card.
Tabla de contenidos
Otros manuales de Enrutador de red de Asoka
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad