Asante IntraCore GBIC 1000LX Manual

Este manual sirve para los siguientes modelos

3

Tabla de contenidos

Otros manuales de Cambiar de Asante

Asante

Asante FriendlyNET GX4-224 Manual de instrucciones

Asante

Asante FriendlyNet FH208B Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

Asante

Asante 3500 Manual de usuario

Asante

Asante IntraCore 3624PWR Manual de usuario

Asante

Asante NetStacker II Manual de usuario

Asante

Asante IntraCore 3524-2G Manual

Asante

Asante FriendlyNET Wireless USB Adapter Manual de usuario

Asante

Asante IntraCore 65120 Series Manual de usuario

Asante

Asante IntraCore 36000 Series Manual de usuario

Asante

Asante FRIENDLYNET FS4116R Manual de usuario

Asante

Asante FriendlyNet FH208P Manual de usuario

Asante

Asante FriendlyNET 7000 Series Manual de usuario

Asante

Asante IntraCore 35516 Series Manual de usuario

Asante

Asante IntraCore 35160 Series Manual de usuario

Asante

Asante Home USB Hub-7 Manual de usuario

Asante

Asante Hub 1016-IQ Manual de usuario

Asante

Asante FriendlyNET GXS-424W Manual de usuario

Asante

Asante IntraCore 35516 Series Manual de usuario

Asante

Asante FriendlyNET FS5005 Manual de usuario

Asante

Asante IntraSwitch 5212 Manual de instrucciones

Asante

Asante FriendlyNet FH100TX5 Manual de usuario

Asante

Asante Universal Serial Bus Hub USB Hub-4 Manual de usuario

Asante

Asante FM2008/2009 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

06-00561-00 Rev.A Asanté Technologies, Inc.

Read Me First !

Model 99-00549-01 1000BaseSX GBIC

Model 99-00550-01 1000BaseLX GBIC

This yellow sheet describes how to install, remove, and maintain Gigabit Interface Converters

(GBICs). For more details, please refer to Asanté IntraCore 9000 or IntraCore 8000 manual.

Caution Unnecessary removal/insertion of a GBIC could lead to premature failure of the GBIC. A

GBIC has a lifetime of 100 to 500 removals/insertions.

GBIC Installation

Caution: When removing or inserting a GBIC, recommend to wear an ESD wrist strap .

Note GBICs are hot-swappable.

To install a GBIC, perform these following steps:

Step 1 Remove the GBIC from its protective packaging.

Step 2 Verify that the GBIC is the correct type for your network by checking the part number. The

number indicates whether it is 1000BaseSX ( multi-mode) , 1000BaseLX ( single-mode).

Step 3 Grip the sides of the GBIC with your thumb and forefinger; insert the GBIC into the slot on

the front of the module.

Step 4 Slide the GBIC into the slot until you hear a click. The click indicates the GBIC is locked

into the slot.

Step 5 When you are ready to attach the fiber-optic cable, remove the plugs from the GBIC and

save for future use.

GBIC Removal

To remove a GBIC, perform these following steps:

Step 1 Disconnect the fiber-optic cable from the GBIC SC-type connector.

Step 2 Release the GBIC from the slot by simultaneously squeezing the plastic tabs (one on

each side of the GBIC).

Step 3 Slide the GBIC out of the slot.

Step 4 Install the plugs in the GBIC optical bores, and place the GBIC in protective packaging.

GBIC Care and Handling

Follow these GBIC care and handling guidelines:

GBICs are static-sensitive. To prevent ESD damage, follow your normal board and

component handling procedures.

GBICs are dust-sensitive. When the GBIC is stored or when a fiber-optic cable is not

plugged in, always keep plugs in the GBIC optical bores.

The most common source of contaminants in the optical bores is debris picked up on the

ferrules of the optical connectors. Use an alcohol swab or Kim-Wipe to clean the ferrules

of the optical connector.