Artesyn IVPX7225 RTM Manual de usuario

Otros manuales para iVPX7225 RTM

1

Otros manuales de Computadora de placa única de Artesyn

Artesyn

Artesyn MVME2502 Guía de inicio rápido

Artesyn

Artesyn MVME2500-ECC Manual de usuario

Artesyn

Artesyn MVME2500 Series Manual de usuario

Artesyn

Artesyn MVME51005E Guía de inicio rápido

Artesyn

Artesyn ATCA-7360 Guía de inicio rápido

Artesyn

Artesyn ATCA-7475 Guía de inicio rápido

Artesyn

Artesyn iVPX7225 RTM Guía de inicio rápido

Artesyn

Artesyn ATCA-7370 Guía de inicio rápido

Manuales populares de Computadora de placa única de otras marcas

WIN Enterprises

WIN Enterprises PL-80910 Manual de usuario

AXIOMTEK

AXIOMTEK SBC81206 Series Manual de usuario

Embest

Embest SOM-PH8800 Manual de usuario

SeaLevel

SeaLevel SBC-R9 Manual de usuario

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manual de usuario

WinSystems

WinSystems PPM-LX800-G Manual de usuario

GIGAIPC

GIGAIPC QBiX-PPC Series Manual de usuario

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manual de usuario

Commell

Commell FS-978 Manual de usuario

GIGAIPC

GIGAIPC QBiP-8665A/ Manual de usuario

VersaLogic

VersaLogic Python EBX-11 Manual de usuario

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manual de usuario

CompuLab

CompuLab SB-A510 Manual de usuario

Boser

Boser HS-7321 Manual de usuario

Premier Farnell

Premier Farnell Embest SBC8530 Manual de usuario

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manual de usuario

Aaeon

Aaeon UP Manual de usuario

Portwell

Portwell WUX Series Manual de usuario

iVPX7225 RTM

Quick Start Guide

P/N:6806800S36B (April 2015) Observe ESD-safe

measures

What’s in the box?

Install the RTM

When installing or servicing the

module or accessories, strictly

observe the safety precautions in

the Safety Notes Summary. Other-

wise, personal injury or property

damage may occur.

• Use either a properly grounded ESD wrist

strap or make sure that you are working

in an ESD-safe environment.

• Connect your ESD wrist strap to the ESD

connector at the front or the rear of the

system.

Make sure you receive all items of your

shipment:

• One iVPX7225 RTM

• One printed copy of Quick Start Guide

(this document)

• One printed copy Safety Notes Sum-

mary

• Any other optional items ordered.

1

24

1. Turn off all equipment power and

then disconnect the power cable

from the power source.

2. Remove the chassis cover as

instructed in the equipment user's

manual.

3. Remove the filler panel(s) from the

appropriate card slot(s) at the rear of

the chassis (if the chassis has a rear

card cage).

4. Slide the top and bottom edge of

the transition module into the rear

guide rails of the chassis.

5. Ensure that the lever of the injector/

ejector is in the outward position.

6. Slide the transition module into the

chassis until resistance is felt.

7. Move the injector/ejector lever in an

inward direction.

8. Verify that the transition module is

properly seated and secure it to the

chassis using the two screws located

at the edges of the face plate.

9. Connect the appropriate cables to

the transition module.

Prepare the installation

site

• For information on the environmen-

tal and power requirements, see the

iVPX7225 RTM Installation and Use

manual.

• Operating temperatures refer to the

temperature of the air circulating

around the blade and not to the

actual component temperature.

3

iVPX7225 RTM-Quick Start Guide

Artesyn Embedded Technologies

Marketing Communications

2900 S. Diablo Way, Suite 190

Tempe, Arizona 85282

Artesyn Embedded Technologies

Lilienthalstr. 17-19

85579 Neubiberg/Munich

Germany

Finding more information

For more information on the product, see

the iVPX7225 RTM Installation and Use and

other related documentation.

Go to www.artesyn.com/computing/sup-

port/product/technical-documenta-

tion.php for technical documentation.

Technical Assistance

For technical assistance, visit http://crcpor-

tal.artesyn.com/