Arec TP-100 Manual de usuario
TP-100
Auto Tracking System
AREC Inc.© All Rights Reserved 2017. l www.arec.com
All information contained in this document is Proprietary
User Manual English
TP-100 User Manual
Auto Tracking System
AREC TP-100 Auto Tracking System can work with different cameras for vertical and horizontal tracking. It may track
lecturers/target in indoor environment when accompanied with a compact AREC AM-600 Positioner. In addition to
online device setup, the AREC Auto Tracking System features both auto and manual tracking modes for even greater
user conveniences. The best choice tracking recording device indeed!
AREC TP-100 Auto Tracking System
AREC AM-600
Wireless microphone positioner
TP-100 User Manual
Table of Contents
1. Product information.................................................................................................3
2. Getting to know your product..................................................................................5
3. Light indicators of your TP-100..............................................................................6
4. Wireless microphone Positioner information.........................................................6
5. Light indicators of your wireless microphone........................................................7
6. How to install your system......................................................................................8
7. How to enable the auto tracking function? ............................................................9
8. How to install a network camera?.........................................................................10
9. The TP-100 management web page.....................................................................11
10. The administrator web page................................................................................16
11. How to setup auto full view function?.................................................................20
Appendix .....................................................................................................................22
TP-100 User Manual
3
4
1. Product information
Precautions before using your product for the rst time:
1. Please open the package of your product with care. Please keep the packaging material as you may need
them for transport, storage, or return for service in future.
2. There is no switch or button inside your product that needs any operation from you. For your safety, DO
NOT open the outer case of your product, apply improper operations on it, e.g. turn or swing it with great
force, as you may get an electric shock and/or void the limited warranty. Contact your local dealer should
there be any problem with your product.
3. For better tracking effect, please do not track in limited spaces. Install your product in open space without
surrounding walls. Avoid walls, barriers like large size glasses and metal objects, in the planned tracking
space.
4. The optimum installation distance: 4~7 meters away from the target object at height 2.5 meters above
ground.
5. Your product is designed for use in indoor environments and without direct sunlight.
6. Please use your product in proper environment. Please DO NOT install your product in the following
environment:
Unstable location or uneven surface
Location near strong magnetic eld
Damp or leaking environment
Overheat or place near heater or wind pipes or location exposed to direct sunlight for long time
Dusty location
Vibrating location
Close to any amplier
7. In case smoke or odor is detected, unplug the power adaptor and send to the service center for
maintenance
8. Please insert the plug of the adaptor rmly in the power socket without exposing the pin to avoid electric
shock. Ensure the socket is of adequate capacity for the required current. DO NOT insert the adaptor in the
power socket before wiring to avoid personal injury.
9. Please remove the power plug if you are not to use your product for long time to maintain electric safety.
Remove the plug by holding the plug's plastic part with dry hands.
10. Please wire your product according to the installation guide and instructions printed on your product for
the optimal effect.
Safety Precautions
TP-100 User Manual
3
4
Hardware specications:
TP-100 Auto Tracking System
Rotation Panning: 355 degree
Tilting: 60 degree (-25 ~ +35 degree )
Tracking range 3~12 meter radius (from Positioner to TP-100)*
Manual operation Webpage control (via TP-100 setting page or <AREC media station> online director)
Joystick & console control via RS-485 interface (Pelco-D/Pelco-P protocol)
Setup function
Enable panning/tilting tracking
Tracking sensitivity adjustment
Offset position denition
15 preset points and 3 patrolling path
One login user account and password management
Device name denition and software update
Power supply DC12V 2A (TP-100 + CI-218 / CI-303 / CI-430)
Working temperature Celsius: 0~50 degree
Loading capacity 800g
Interface
RJ-45 port*2
Power socket*2
RS-485 connector*1
Suggested external camera devices
Optional camera
AREC CI-218 (18X) digital network camera
AREC CI-303 (3X) digital network camera
AREC CI-430 (30X) digital network camera
Video format H.264, up to 1080p@30fps
AM-600 wireless microphone positioner**
Function key stop tracking and mute function
Effective range of
microphone A circle of 12 meter radius (from microphone to sound receiving antenna)***
Audio input Built-in microphone
Φ3.5 audio input jack
Power input Built-in rechargeable lithium battery 3.7V 720mA
Interface: USB Micro-B port
Battery life 4 hours (approximate continuous operating time)
* Based on actual results in AREC recommended indoor operation environment.
** The wireless microphone must work together with AREC Media Station.
*** Without wall, human body or any large size barrier in between.
TP-100 User Manual
5
6
2. Getting to know your product
Front light indicators
Front
Rear
Power light indicator*
TP-100 network light indicator
Camera network light indicator
* Steady green: When powered ON
Flashing green: When any object is
identied
A. Fast removing board
(for camera mounting)
B. Standard 1/4" 20 UNC screw hole
(to x to the fast removing board)
C. M3 screw holes
(for xing with included screws)
A. TP-100 external network port*
B. TP-100 external power socket
C. RS-485 connector
D. Power and network connector for
TP-100 and Cloud console
E: TP-100 reset button, reset all settings
to the factory defaults, including the IP
address.
*To connect to Local Area Network(LAN)
or AREC Media Station
A
BC C
A
B
CDE
TP-100 User Manual
5
6
3. Light indicators of your TP-100
4. Wireless microphone positioner information
Light indicator displays its function and status and signals something is being tracked.
AREC TP-100 can work with the AREC AM-600 wireless microphone, an exclusive positioner, for concurrent
lecturing and tracking shooting. When the person wearing the microphone moves, the TP-100 would follow its
movement without interruption by other moving objects.
TP-100 Light indicator Status
Power Indicator Red and green
The light turns green after power ON
It flashes green when something is being
tracking
Flashing orange means firmware update/
system reset is ongoing.
TP-100 Network Indicator Blue The light flashes blue when TP-100's
network connection is working well.
Network Indicator of
the Network Camera Blue The light flashes blue when the network
camera is working normally
Power / Tracking on-off
Microphone pairing / mute
Power input Micro USB-B port
Ø3.5 audio input jack
1
1
2
2
3
3
4
4
TP-100 User Manual
7
8
Light indicator of your wireless microphone displays its function and status and signals pairing status with
the AREC Media Station.
5. Light indicators of your wireless microphone
Wireless microphone Light Color Status
Power switch and stop
tracking button
Red and green
Press and hold the button for more than 3 seconds until
the green light turns on.
• Green light turns on when power is ON.
• Red light flashes when power is low
Press the button twice to pause/resume tracking function.
When the tracking function is paused, the TP-100 Auto
Tracking Mount will return to the full-view position.
• Red light is on when auto tracking function is suspended.
To turn off the wireless microphone positioner, press and
hold the button till the light turn red.
The light turns off when the unit is power off.
* Power saving function: The wireless microphone
positioner will automatically power off, if it has been
placed flat and static for more than 5 minutes.
Wireless microphone
pairing and mute button
Blue and Red
Press and hold the button for more than 3 seconds to
pair the wireless microphone positioner with AREC media
station*.
• Blue light flashes fast during pairing
• Blue light flashes slow after successfully pairing
Press the button twice to mute/unmute the wireless
microphone positioner.
• Red light is on, when the wireless microphone positioner
is muted.
The wireless microphone positioner memorizes the latest
pairing result. To clear the pairing, press and hold the
button for more than 10 seconds.
Micro USB port Green Green light is on during power charging
Ø3.5 audio input jack
For external microphone
TP-100 User Manual
7
8
(3) Align the screw holes in your TP-100 to the
holes you made earlier, lock it with the
included screws and nuts.
(4) Replace the ceiling with TP-100 to its original location, connect both the
network and power cables, and the installation is completed.
2.Wall mounted or on a stand
(1) The standard 1/4” 20 UNC and three
M3 screw holes at bottom of TP-100
enable it to mount to a wall or on a
stand.
(2) Fix the hanger or stand to a wall or
floor, then mount your TP-100 to the
fast removal board or the screw holes
in the hanger.
Your TP-100 can be ceiling mounted or wall mounted or afxed on a stand. See below for each installation
method.
1.Ceiling mounted installation
(1) Remove the ceiling panels at the target
installation location.
6. How to install your system
(2) Open the positioning sticker, and afx it to the desired
location at the target ceiling. Drill holes with a drilling
tool.
TP-100 User Manual
9
10
Note 1: Some hangers may feature a screw locking place with limited size. The bottom of your TP-100 may
thus fail to fully snap to it and lead to vibration during panning or tilting and, in turn, poor recording.
Please use hanger with larger screw locking place.
Note 2: Recommended installation position: 4~7 meters away from the object being tracked.
* Note: Fix your AM-600 to the target person
or object properly. For better tracking effect,
wear a positioner with the smooth and
transparent side facing out.
10m
7m 7m
10m
9m 9m
1. Connect your TP-100 to power source and the
green power indicator lights up.
3. Fix your AM-600 to the target person or object properly. After your AM-600 is detected by your TP-100, its
power indicator flashes, and it follows the movement of the person automatically.
2. Power ON AM-600 by pressing and holding the button
for more than 3 seconds. Its light indicator is steady
green when powered ON.
7. How to enable the auto tracking function?
4m
7m
Otros manuales para TP-100
2
Tabla de contenidos
Otros manuales de GPS de Arec
