ANTAIRA USB-HUB4K Manual de usuario

Thank you for purchasing this high-speed 4-port USB2.0 hub. It provides

an ideal solution to expand 4 USB2.0 ports from one single USB2.0 host

port. It provides metal case with Screw Lock feature for upstream and

downstream USB ports. It provides excellent reliability and

performance for most of the applications.

Features:

Compliant with USB Specification Revision 2.0

Rigid and Wall-mountable Metal Case

Supports Screw Lock Mechanism for Upstream and Downstream

Connectors to Enhance Reliability

Supports High-speed and or Full-speed Packet

Protocol Sequencer for Endpoint 0/1

Provides 7 Downstream Facing Ports

Supports 480Mbps, 12Mbps and 1.5Mbps Speed

Supports Self-powered and Bus-powered Mode

Port #1

Port#4

4-Port USB2.0 Metal Hub with Screw Lock

Mechanism

Installation Guide

1. Introduction

2. Connector Layout

Downstream USB2.0 Ports

Power LED

+5V DC Jack, w/ Screw Lock

USB2.0 Connector (upstream

port, w/ Screw Lock)

4S/8S RS232 to USB Multi Serial Adapter w/ Metal Case

Back side Connection:

Front Side Connection:

+5V DC Jack Power Connector (w/ Screw Lock): A DC5V AC

adapter (with optional Screw Lock Connector) is supplied

with this product. The AC adapter’s output has to be

connected to here.

+5V DC Jack

(AC Adapter w/ Screw Lock)

Type-B USB2.0

Upstream Cable

(w/ Screw Lock)

Downstream USB2.0 Port w/

Screw Lock Cable

4S/8S RS232 to USB Multi Serial Adapter w/ Metal Case

USB2.0 Upstream Connector (w/ Screw Lock): Type-B

connector from upstream USB2.0 port. It is connected from

host or another USB2.0 hub. The connector is compatible

with either non-Screw-Lock or Screw-Lock type cables.

USB2.0 Downstream Connectors (w/ Screw Lock): There are

4 Type-A downstream USB2.0 connectors. They should be

connected to the USB devices with non-Screw-Lock or

Screw-Lock (optional) cables.

1. Use static electricity discharge precautions.

Remove possible static discharge potential from any

objects that the hub may come in contact with before

installation. This can be accomplished by touching a bare

metal chassis rail after you have turned off the power.

2. Attached the AC power adapter.

3. Connecting USB Host cable: The host cable is a standard

A-to-B USB2.0 cable (or optional Screw-Lock type cables).

Please connect the type-A end connector of the cable to

your upstream USB port, then connect the type-B end

connector to this hub. Since the USB hub is plug-and-play,

you don’t have to turn off your host computer when

installing the hub.

Note: In some cases, you will see an error message said

that the USB Hub caused the USB bus power over the current limit,

please ignore this message since the hub is hot plug and its power

capacitor will cause a very short period of current. It will NOT affect

your USB function.

4. Connect the USB devices to the downstream ports of this

hub. You can use either non-Screw-Lock or Screw-Lock

type (optional) cables.

5. Mount your hub on the wall if required.

3. Hardware Installation

4S/8S RS232 to USB Multi Serial Adapter w/ Metal Case

To check the USB hub installation in Windows device manager, please

follow the following steps:

1. Click Start

2. Click Control Panel

3. Click System

4. Click Device Manager button

5. Double click Universal Serial Bus Controller

6. Double click Generic USB Hub, the message will show that this

device is working properly.

Operating temp.: 0 to 558C (32 to 1318F)

Operating humidity: 5 to 95% RH

Dimensions (LxWxH): 7.03”(L)x2.43”(W)x0.92”(H)

(17.85 x 6.16 x 2.34 cm)

5. Environmental Specifications

4. Checking the Hub Installation

Here is your USB2.0 Hub

Otros manuales para USB-HUB4K

Tabla de contenidos

Otros manuales de Cambiar de ANTAIRA

ANTAIRA

ANTAIRA LMX-0500-V2 Series Manual de usuario

ANTAIRA

ANTAIRA LMX-0600-V2 Series Manual de usuario

ANTAIRA

ANTAIRA LMP-0501 V2 Manual de usuario

ANTAIRA

ANTAIRA LMP-0501-24 Series Manual de usuario

ANTAIRA

ANTAIRA LMP-1802G-M12-10G-SFP-67-24 Series Manual de usuario

ANTAIRA

ANTAIRA LNP-2004G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LNP-0500G Series Manual de usuario

ANTAIRA

ANTAIRA LMX-C602G-SFP-V2 Series Manual de usuario

ANTAIRA

ANTAIRA LMX-0802 Series Manual de usuario

ANTAIRA

ANTAIRA LMP-1802G-M12-10G-SFP-67-110 Series Manual de usuario

ANTAIRA

ANTAIRA LMP-0601G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LNP-1600G Series Manual de usuario

ANTAIRA

ANTAIRA LMP-0602-24-V2 Series Manual de usuario

ANTAIRA

ANTAIRA LMP-0501-M-V2 Manual de usuario

ANTAIRA

ANTAIRA LNX-C800 Series Manual de usuario

ANTAIRA

ANTAIRA LMP-0501 Series Manual de usuario

ANTAIRA

ANTAIRA LMX-1600G Series Manual de usuario

ANTAIRA

ANTAIRA LMX-0600 Series Manual de usuario

ANTAIRA

ANTAIRA LMP-1002C-SFP-24 Series Manual de usuario

ANTAIRA

ANTAIRA LMX-2602G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LMP-0800G-24 Manual de usuario

ANTAIRA

ANTAIRA LMP-2004G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LNX-1002G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LMX-1802G-SFP Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario