Anritsu ME7840A Manual de usuario

MODEL

ME7840A

POWER AMPLIFIER TEST SYSTEM

OPERATION AND

MAINTENANCE MANUAL

490 JARVIS DRIVE - MORGAN HILL, CA 95037-2809 P/N: 10410-00225

REVISION: A

PRINTED: JUNE 2000

WARRANTY

The ANRITSU product(s) listed on the title page is (are) warranted against defects in materials and

workmanship for three years from the date of shipment.

ANRITSU’s obligation covers repairing or replacing products which prove to be defective during the

warranty period. Buyers shall prepay transportation charges for equipment returned to ANRITSU for

warranty repairs. Obligation is limited to the original purchaser. ANRITSU is not liable for consequential

damages.

LIMITATION OF WARRANTY

The foregoing warranty does not apply to ANRITSU connectors that have failed due to normal wear. Also,

the warranty does not apply to defects resulting from improper or inadequate maintenance by the Buyer,

unauthorized modification or misuse, or operation outside of the environmental specifications of the

product. No other warranty is expressed or implied, and the remedies provided herein are the Buyer’s sole

and exclusive remedies.

TRADEMARK ACKNOWLEDGEMENTS

V Connector and K Connector are registered trademarks of ANRITSU Company.

GPC-7 is a registered trademark of Amphenol Corporation.

Ink Jet and Think Jet are registered trademarks of Hewlett-Packard Co.

MS-DOS is a registered trademark of Microsoft Corporation.

NOTICE

ANRITSU Company has prepared this manual for use by ANRITSU Company personnel and customers

as a guide for the proper installation, operation and maintenance of ANRITSU Company equipment and

computer programs. The drawings, specifications, and information contained herein are the property of

ANRITSU Company, and any unauthorized use or disclosure of these drawings, specifications, and

information is prohibited; they shall not be reproduced, copied, or used in whole or in part as the basis for

manufacture or sale of the equipment or software programs without the prior written consent of ANRITSU

Company.

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, ANRITSU Company uses

the following symbols to indicate safety-related information. For your own safety, please read the informa-

tion carefully BEFORE operating the equipment.

Symbols used in manuals

DANGER This indicates a very dangerous procedure that could result in serious

injury or death if not performed properly.

WARNING This indicates a hazardous procedure that could result in serious in-

jury or death if not performed properly.

CAUTION This indicates a hazardous procedure or danger that could result in

light-to-severe injury, or loss related to equipment malfunction, if

proper precautions are not taken.

Safety Symbols Used on Equipment and in Manuals

(Some or all of the following five symbols may or may not be used on all ANRITSU equipment. In addition,

there may be other labels attached to products that are not shown in the diagrams in this manual.)

The following safety symbols are used inside or on the equipment near operation locations to provide infor-

mation about safety items and operation precautions. Ensure that you clearly understand the meanings of

the symbols and take the necessary precautions BEFORE operating the equipment.

This indicates a prohibited operation. The prohibited operation is indi-

cated symbolically in or near the barred circle.

This indicates a compulsory safety precaution. The required operation

is indicated symbolically in or near the circle.

This indicates warning or caution. The contents are indicated symboli-

cally in or near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

ME7840A OMM Safety 1

Safety 1 ME7840A OMM

Always refer to the operation manual when working near locations at

which the alert mark, shown on the left, is attached. If the operation,

etc., is performed without heeding the advice in the operation manual,

there is a risk of personal injury. In addition, the equipment perfor-

mance may be reduced.

Moreover, this alert mark is sometimes used with other marks and de-

scriptions indicating other dangers.

WARNING

When supplying power to this equipment, connect the accessory 3-pin

power cord to a 3-pin grounded power outlet. If a grounded 3-pin outlet

is not available, use a conversion adapter and ground the green wire, or

connect the frame ground on the rear panel of the equipment to ground.

If power is supplied without grounding the equipment, there is a risk of

receiving a severe or fatal electric shock.

WARNING

This equipment can not be repaired by the operator. DO NOT attempt to

remove the equipment covers or to disassemble internal components.

Only qualified service technicians with a knowledge of electrical fire

and shock hazards should service this equipment. There are

high-voltage parts in this equipment presenting a risk of severe injury

or fatal electric shock to untrained personnel. In addition, there is a

risk of damage to precision components.

WARNING

Repair

For Safety

Use two or more people to lift and move this equipment, or use an

equipment cart. There is a risk of back injury, if this equipment is lifted

by one person.

WARNING

Table of Contents

Chapter 1 General Information

SCOPE OF THIS MANUAL...............................1-1

INTRODUCTION ....................................1-1

RELATED MANUALS .................................1-1

CONVENTIONS.....................................1-2

SERIAL NUMBER ...................................1-2

ONLINE MANUALS ..................................1-2

PATS SYSTEM OVERVIEW ..............................1-2

HARDWARE DESCRIPTION..............................1-2

SYSTEM DESCRIPTION ................................1-5

DRA Scorpion ....................................1-5

MS4782X Test Set .................................1-6

Connectors and Ports ................................1-7

K FACTOR ........................................1-9

ADAPTIVE P STOP ...................................1-9

SOFTWARE DESCRIPTION ..............................1-9

TEST EXECUTIVE ...................................1-9

SOFTWARE STRUCTURE ..............................1-11

MS7840A OPTIONS ..................................1-12

OPTIONAL ACCESSORIES..............................1-12

PREVENTIVE MAINTENANCE ...........................1-13

USER SUPPLED TEST SET .............................1-13

PERFORMANCE SPECIFICATIONS.........................1-13

RECOMMENDED ITEMS...............................1-15

USER SUPPLIED ITEMS ...............................1-15

Chapter 2 Installation

INTRODUCTION ....................................2-1

EQUIPMENT COMPLEMENT .............................2-1

UNPACKING and INSPECTION............................2-1

INSTALLATION - HARDWARE ............................2-2

INSTALLATION - SOFTWARE.............................2-7

ME7840A OMM i

Installation .....................................2-7

What else is on the CD?...............................2-7

Uninstalling the software..............................2-7

SERVICE CENTERS ..................................2-8

Chapter 3 Operations, General

INTRODUCTION ....................................3-1

PREPARING THE SYSTEM ..............................3-1

Unused Connections ................................3-2

USING PATS SOFTWARE ...............................3-4

Software

Organization.....................................3-4

COLLATERAL FUNCTIONS ..............................3-5

File..........................................3-5

Help .........................................3-6

Tools .........................................3-7

Chapter 4 Operations, Calibration

INTRODUCTION ....................................4-1

OPERATION, GENERAL ................................4-1

PROGRAM FILES....................................4-1

TEST EQUIPMENT...................................4-2

GENERAL ........................................4-3

POWER LEVEL .....................................4-4

HOTS22.........................................4-8

S-PARAMETERS CAL .................................4-11

CAL FILE SETUP ...................................4-15

Chapter 5 Operations, Measurement

INTRODUCTION ....................................5-1

OPERATION, GENERAL ................................5-1

MEASUREMENT CALIBRATION ...........................5-1

GENERAL ........................................5-1

Calibration(s) Completed ..............................5-1

Calibration(s) Not Completed ...........................5-2

S-PARAMETER TESTS: S21,S

11,S

22,S

12,ALL.....................5-4

S-PARAMETER TEST: K FACTOR...........................5-7

POWER SWEEP, TWO TONE.............................5-10

Single Frequency Power Sweep ..........................5-10

Multiple Frequency Power Sweep.........................5-14

ii ME 7840A OMM

Gain and IMD Power Sweep ...........................5-18

POWER SWEEP, ONE TONE .............................5-22

Single Frequency Power Sweep ..........................5-22

IMD...........................................5-26

HARMONICS .....................................5-29

HOTS22........................................5-32

Chapter 6 Performance Verification Procedure

INTRODUCTION ....................................6-1

CONVENTIONS.....................................6-1

TEST

EQUIPMENT ......................................6-1

SOURCE OUTPUT ACCURACY ............................6-2

Setup: ........................................6-2

Test Procedure ...................................6-2

RETURN LOSS CONFIDENCE TEST.........................6-3

Setup.........................................6-3

Test Procedure: ...................................6-4

SYSTEM DYNAMIC RANGE .............................6-6

Test Procedure: ...................................6-6

RECEIVER DISPLAY LINEARITY ..........................6-8

Setup: ........................................6-8

Chapter 7 Preamplifier Operations

INTRODUCTION ....................................7-1

USE OF EXTERNAL PREAMPLIFIERS........................7-1

Alternative 1 ....................................7-1

Alternative 2 ....................................7-1

Appendix A Calibration Specification Files

INTRODUCTION ....................................A-1

FILE TYPES.......................................A-1

OPEN FILES ......................................A-1

TECHNICAL DETAILS.................................A-1

POWER LEVE.TXT ..................................A-11

CAL FILES SETUP.TXT................................A-11

HOT S22.TXT ......................................A-13

S-PARAMETERS. TXT ................................A-14

ME7840A OMM iii/iv

Otros manuales para ME7840A

Tabla de contenidos

Otros manuales de Equipo de prueba de Anritsu

Anritsu

Anritsu MP8931A Manual de usuario

Anritsu

Anritsu ML8720B Manual de usuario

Anritsu

Anritsu MS9720A Manual de usuario

Anritsu

Anritsu MT9810B Manual de usuario

Anritsu

Anritsu MT9810A Manual de usuario

Anritsu

Anritsu MT9812B Manual de usuario

Anritsu

Anritsu BERTWave MP2100B Manual de usuario

Anritsu

Anritsu Network Master Series Manual de usuario

Anritsu

Anritsu MT1000A Network Master Pro Manual de usuario

Anritsu

Anritsu MN469xC Series Manual de usuario

Anritsu

Anritsu MX900030A Manual de usuario

Anritsu

Anritsu MT8850A Manual de usuario

Anritsu

Anritsu MT9810A Manual de usuario

Anritsu

Anritsu MT8860C Manual de usuario

Anritsu

Anritsu MP1590B-30 Manual de usuario

Anritsu

Anritsu Site Master S251B Manual de usuario

Anritsu

Anritsu MP1590B Manual de usuario

Anritsu

Anritsu 3659 Manual de usuario

Anritsu

Anritsu MT8860B Manual del propietario

Anritsu

Anritsu VectorStar MN4690B Series Manual de usuario

Anritsu

Anritsu MT1000A Network Master Pro Manual de usuario

Anritsu

Anritsu MU150101A Manual de usuario

Anritsu

Anritsu MT1000A Network Master Pro Manual de usuario

Anritsu

Anritsu MX183000A Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario