Angekis Blade VS+ Manual de usuario
User Manual V1.0 EN
Please refer this document before using
HD PTZ Camera
Blade VS+
— 1 —
CONTENT..............................................................................................................1
SAFETY GUIDES.................................................................................................. 2
ACCESSORY..........................................................................................................2
PRODUCT HIGHLIGHTS...................................................................................4
PRODUCT SPEC.................................................................................................. 5
CAMERA INTERFACE.........................................................................................6
CAMERA DIMENSION......................................................................................7
IR REMOTE CONTROLLER...............................................................................8
VISCA IN(RS232 PORT)................................................................................. 10
VISCA PROTOCOL........................................................................................... 11
PELCO-D PROTOCOL..................................................................................... 18
PELCO-P PROTOCOL...................................................................................... 19
OSD MENU........................................................................................................ 20
UVC CONTROL................................................................................................. 23
Blade VS+
—
2
—
Safety Guides
● Before operation, please fully read and follow all instructions in the manual. For your
safety, always keep this manual with the camera.
● The camera power voltage is 12V DC, rated currency is 2A. We suggest you use it with
the original power supply adapter supplied by the factory.
● Please keep the power cable, video cable and control cable in a safe place. Protect all
cables especially the connectors.
● Operational environment: -10℃~50℃, humidity less than 80%.
● To avoid any danger, please keep the camera away from the corrosive liquid.
● Avoid stress, vibration and damp during transportation, storage and installation.
● Do not remove the camera housing and cover. For any service, please contact
authorized technicians.
● Video cable and control cable should be individually shielded, and cannot be
substituted with other cables. Do not direct the camera lens towards strong light, such as
the sun or the intensive light.
● Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning
agent when there is need to clean. To avoid damage on the camera lens, never use strong
or abrasive cleaning agents on the camera housing.
● Do not move the camera by holding the camera head. To avoid mechanical trouble, do
not rotate the camera head by hand.
● Put the camera on fixed and smooth desk or platform, avoid leaned installation.
● Power Supply Polarity:
Accessory
Check all below items when open the package
Camera ······································································ 1PCS
Power Adapter···························································· 1PCS
Power Cable································································ 1PCS
Remote Controller······················································· 1PCS
USB Type-C Cable························································ 1PCS
RS232 Cable································································ 1PCS
User Manual································································1PCS
Blade VS+
—
3
—
QUICK START
Dial Switch Setting (at the bottom of the camera)
Dial Switch (ARM)
SW-1 SW-2 Instruction
1 OFF OFF Upgrading mode
2 ON OFF Debugging mode
3 OFF ON Undefined
4 ON ON Working mode
Dial Switch
SW-3 SW-4 Instruction
1 OFF OFF Reserved
2 ON OFF Reserved
3 OFF ON Reserved
4 ON ON Reserved
Dial Switch
SW-5 SW-6 Instruction
1 OFF OFF Reserved
2 ON OFF Reserved
3 OFF ON Reserved
4 ON ON Reserved
Blade VS+
—
4
—
Product Highlights
★With the most advanced HD DSP, 1/2.8-inch 2.4 million image sensor.
★High-quality 10x 62.5-degree wide-angle optical lens, to ensure the smooth and
transparent HD images.
★ Independent intellectual property rights of the focus algorithm, fast and accurate
focus performance, to ensure that the image remains clear in the process of zooming,
focusing process is fast and smooth.
★ USB and HDMI output simultaneously.
★ HDMI maximum resolution support 1920*1080P60 output, suitable for a variety of
occasions.
★ USB Type-C multiple compression output, the maximum resolution support
MJPG1920*1080P60, suitable for different video software applications.
★USB Type-C support Windows, MAC OS, Android, Linux and other operating systems.
★Using the standard UVC protocol, compatible with most video conferencing software.
★Support image flip function: can be front-mounted, inverted, to meet the requirements
of different occasions video framing.
★High-precision motor positioning, quiet and smooth mechanical rotation.
★Support 128 preset bits.
★Support RS232/485 serial port control.
★ Standard Sony Visca and Pelco-P/D control protocol.
★Support WDR wide dynamic, 3D noise reduction function.
★Brightness, contrast, hue, saturation, sharpness, gamma, exposure, white balance, gain
and other parameters can be adjusted.
★Support user's own program upgrade.
★Support USB Type-C interface power supply.
★Comes with a multi-functional infrared remote control, easy and fast for users to use.
★Multi-language menu: support Chinese, English, Russian.
Blade VS+
—
5
—
PRODUCT SPEC
U2-10FHD3
Sensor 1/2.8inch high quality, 2.4 MP CMOS Sensor
Video Format
HDMI
1920*1080P60/59.94/50/30/29.97/25/24
1920*1080I60/59.94/50
1280*720P60/59.94/50/30/29.97/25
USB
Type-C
MJPG: 1920*1080P60; 1280*960P60; 1280*720P60;
1024*768P60; 800*600P60; 640*480P30; 320*240P60
YUY2：640*480P30；320*240P30
Video Interface HDMI, USB Type-C
Focal Length 4.7mm~47mm
Aperture F1.6~3.0
View Angel 62.5°(Wide)~6.43°(Tele)
Lens
Magnifications 10x optical zoom + 4x digital zoom
Rotation Angle Pan: ±170°; Tilt: -30°~+90°;
Rotation Speed Pan: 0.1°~120°/s; Tilt: 0.1°~80°/s
Preset Remote controller: 10; RS232: 128; Accuracy: 0.1°
Control Port RS232
Protocol Visca Serial, Pelco-P, Pelco-D
Minimum Lux 0.1lux
White Balance Auto / Manual / ATW / Push / Indoor / Outdoor / Color Temperature
Exposure Auto / Manual /Shutter / Iris / Bright
Focus Auto / Manual
Iris Auto / Manual
Shutter Auto / Manual
Gamma select Supported
WDR Supported
BLC Supported
Blade VS+
—
6
—
CAMERA INTERFACE
2D Noise
Reduction
Supported
3D Noise
Reduction Supported
Anti-flicker OFF, 50Hz, 60Hz
Pan Tilt Flip Supported
Mirroring Supported
Input Voltage DC 12V / USB 5V
Dimension 148mm×132mm×162mm
Net Weight 0.9kg(2LBS)
Working
Temperature -10℃~50℃
Working
Humidity ≤80%
1.Camera Lens 5.Dial Switch 9.DC 12V plug
2.Camera Base 6.Tripod Screw Hole 10.RS232 port
3.IR Receiver Panel 7.Installation Hole 11.HDMI port
4.Power Indicator Light 8.Power Indicator 12.USB Type-C port
Blade VS+
—
7
—
CAMERA DIMENSION（MM）
Blade VS+
— 7—
IR REMOTE CONTROLLER
Power Key
Under Normal working mode ，short press Power
key to let the camera enter standby mode；Press it
again ，the camera will do self-configuration and
then go back to HOME position；It will go to preset
position if the power on mode has been set.
Address/Camera Setting Key
Set+（Cam1-Cam4）：set camera’s remote
Control address.
Short press Cam1 - Cam4 to select the camera.
Number Key
Set Presets: Set+(0-9) number key to recall presets
Clear Key
Clear +(0-9): to clear the relative preset;
Long press to clear all presets.
Blade VS+
— 7—
Menu Key
OK: to confirm the menu selection
Menu：enter/exit menu
Back：Back to previous menu
F+/F-:
Set focus by manual, only valid under manual focus
mode.
T/W: Set the lens zoom rate
Navigating Key:Up/Down/Left/Right
Under normal working mode, use navigate key to set
the pan tilt, and select values when enter OSD.
Home Key:
Under normal working mode, short press Home key
to let the camera go back to home position.
Flip: Enable/Disable the picture up/down flip
Mir: Enable/Disable the picture left/right flip
MF: Enable manual focus mode
AF:Enable auto focus mode
SHARP: Set sharpness level
NR+/-: Set noise reduction level
Reset: Long Press(3S）to reset camera
REV: Display camera revision
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de Angekis
Angekis
Angekis Blade Manual de usuario
Angekis
Angekis Saber AT Manual de usuario
Angekis
Angekis Saber IP20X NDI Manual de usuario
Angekis
Angekis BLADE 4K Manual de usuario
Angekis
Angekis Saber 4K NDI Manual de usuario
Angekis
Angekis Saber IP20X Manual de usuario
Angekis
Angekis Saber Light Manual de usuario
Angekis
Angekis Saber 20x Manual de usuario
