AND HVL-CS Manual de usuario
www.andmercury.com.au
Page 2 HVL-CS Instruction Manual v3.0
Table of Contents
1. General Description...............................................................................................3
2. Preparation for use.................................................................................................3
2.1. Power source..................................................................................................3
3. Installing the Batteries ...........................................................................................4
4. Chair.......................................................................................................................5
4.1. Safety breaks..................................................................................................5
4.2. Footrest ..........................................................................................................5
4.3. Handle............................................................................................................5
5. Display and Symbols .............................................................................................6
6. Weighing................................................................................................................7
7. Dimensions ............................................................................................................8
Page 3 HVL-CS Instruction Manual v3.0
1.General Description
The HVL-CS is an ergonomic digital chair scale designed for patient comfort and ease
of use in the hospital / nursing home environment. The weight is displayed on a
battery powered digital indicator in clear numbers on a high contrast liquid crystal
display. The chair is supported on a five wheel frame, and safety brakes are provided
in all five wheels. A footrest at the front allows the patient to sit comfortably in the
chair. For moving the scale between locations a convenient push handle is fitted at the
rear of the chair. All surfaces are easy to clean and may be wiped with a damp cloth.
2.Preparation for use
2.1.Power source
The HVL-CS digital chair scale may be powered from dry batteries, (normally
already fitted to your scale), an optional AC power adapter, or from an optional
rechargeable battery pack (AD-1681). If the batteries are not already in place in
your scale please refer to page 2, “Installing the Batteries”.
Page 4 HVL-CS Instruction Manual v3.0
3.Installing the Batteries
Step 1 Turn off the display.
Step 2 Press and slide to open the external
cover. Press the hook of the internal
cover to the left side and lift the cover.
Step 3 Insert six new dry cells ensuring correct
polarity (+,-). Battery size is `D'
Step 4 Close the covers opened in step 2.
Cautions
Replace used dry cells with six new ones, when is displayed.
Do not mix used and new batteries. It may cause damage to the battery or
product.
Check the polarity when installing the batteries. If you do not observe this it may
cause battery leakage. Also if the polarity of a battery is wrong the scale may
only work temporarily.
The battery life is dependent upon the environmental temperature. Remove
batteries from the display unit when the scale is not to be used for a long time.
They may leak and cause damage.
Damage which is due to battery leakage is not covered under warranty.
Page 5 HVL-CS Instruction Manual v3.0
4.Chair
4.1.Safety breaks
The chair is mounted upon the wheel base in such a manner as to provide the
maximum stability for the patient. The brakes should be applied securely to a
minimum of two wheels whenever the scale is in use. The chair scale can easily be
moved from one area to another by releasing the brakes and then pushing the scale
forward by use of the rear mounted handle. To apply the brakes press firmly down
on the black tab in the wheel with the foot.
To release the brakes lift the black tab in the wheel with the foot.
Cautions
Scale should only be moved when empty.
It is not to be used to transport persons.
4.2.Footrest
A footrest is provided to allow the patient to sit comfortably and provide a stable
weight reading. Far easy access to the chair the footrest can be raised up each side
to provide a clear area for the patient to stand.
4.3.Handle
A handle is provided, at the rear of the display, to allow the chair to be easily
moved from area to area once the brakes have been released.
Page 6 HVL-CS Instruction Manual v3.0
5.Display and Symbols
Stability mark.
When the current weight value is not changing, this
mark is displayed. The reading may now be taken.
Zero point mark.
With nothing on the pan and pressing the
switch, this mark is displayed. The zero point is the
starting point to weighing.
Net mark.
After pressing the switch this mark is
displayed to show net weight is displayed
Preset tare mark.
When storing a tare with digital input this mark
blinks.
When the battery power is low this mark is
displayed. Replace with six new batteries.
Example:
-Display of zero (zero point). With an empty
weighing pan by pressing the switch.
-The Zero mark is displayed.
-The stability mark is displayed.
Page 7 HVL-CS Instruction Manual v3.0
6.Weighing
To weigh a patient the following steps should be carried out:
1. Ensure that the chair is correctly positioned with the black brake tabs at the
rear of the chair.
2. Ensure that the safety brakes are firmly applied and that the footrest is in the
up position.
3. Ensure the seat is empty and switch on the scale.
4. Wait for the reading to show 0.00 kg
5. Assist the patient into the chair and lower the footrest, placing the patient's
feet comfortably.
6. Watch for the STABLE circle to light and then read the weight from the
display.
7. Raise the footrest and assist the patient in leaving the chair.
Page 8 HVL-CS Instruction Manual v3.0
7.Dimensions
All dimensions are in millimetres
HEAD OFFICE:
32 Dew Street, Thebarton, S.A. 5031
Tel: (08) 8352-3033
Fax:(08) 8352-7409
VICTORIAN OFFICE:
Unit 4
313 Arden Street, Kensington, VIC. 3031
Tel: (03) 9372-1522
Fax:(03) 9372-1193
NSW OFFICE:
Unit 4, 14 Abbott Road, Seven Hills, NSW 2147
Tel: (02) 9674-5466
Fax:(02) 9674-2544
Internet Address:
http://www.andmercury.com.au
Tabla de contenidos
Otros manuales de Escala de AND
AND
AND HV-15KC Manual de usuario
AND
AND HV-15KGL Manual de usuario
AND
AND GX-M Series Manual de usuario
AND
AND GR Series Manual de usuario
AND
AND PREMIUM UC-352CNBLE Manual de usuario
AND
AND UC-324NFC Manual de usuario
AND
AND EK-120G Manual de usuario
AND
AND UO-200 Manual de lista de piezas
AND
AND FG-CWP Series Manual de usuario
AND
AND SJ-2000H Manual de usuario
AND
AND UC-321 Manual de usuario
AND
AND HL-200 Manual de usuario
AND
AND HR Series Manual de usuario
AND
AND PLUSCONNECT UC-350CNBLE Manual de usuario
AND
AND PR-5 Manual de usuario
AND
AND SJ-WP Series Manual de usuario
AND
AND UC-502 Manual de usuario
AND
AND EK-ilEW-i Series Manual de usuario
AND
AND HV-CWP Series Manual de usuario
AND
AND EJ-120 Manual de usuario
