Analog Devices ADSP-BF561 EZ-KIT Lite Guía del usuario

ADSP-BF561 EZ-KIT Lite®

Evaluation System Manual

Revision 3.3, July 2012

Part Number

82-000811-01

Analog Devices, Inc.

One Technology Way

Norwood, Mass. 02062-9106

ment may not be reproduced in any form without prior, express written

consent from Analog Devices, Inc.

Printed in the USA.

Disclaimer

Analog Devices, Inc. reserves the right to change this product without

prior notice. Information furnished by Analog Devices is believed to be

accurate and reliable. However, no responsibility is assumed by Analog

Devices for its use; nor for any infringement of patents or other rights of

third parties which may result from its use. No license is granted by impli-

cation or otherwise under the patent rights of Analog Devices, Inc.

Trademark and Service Mark Notice

The Analog Devices logo, Blackfin, CrossCore, EngineerZone,

EZ-Extender, EZ-KIT Lite, and VisualDSP++ are registered trademarks of

Analog Devices, Inc.

All other brand and product names are trademarks or service marks of

their respective owners.

Regulatory Compliance

The ADSP-BF561 EZ-KIT Lite is designed to be used solely in a labora-

tory environment. The board is not intended for use as a consumer end

product or as a portion of a consumer end product. The board is an open

system design which does not include a shielded enclosure and therefore

may cause interference to other electrical devices in close proximity. This

board should not be used in or near any medical equipment or RF devices.

The ADSP-BF561 EZ-KIT Lite has been certified to comply with the

essential requirements of the European EMC directive 89/336/EEC

amended by 93/68/EEC and therefore carries the “CE” mark.

The ADSP-BF561 EZ-KIT Lite has been appended to Analog Devices,

Inc. Technical File (TCF) referenced ‘DSPTOOLS1’ dated

December 21, 1997 and was awarded CE Certification by an appointed

European Competent Body as listed below.

Technical Certificate No: Z600ANA1.016

Issued by: Technology International (Europe) Limited

60 Shrivenham Hundred Business Park

Shrivenham, Swindon, SN6 8TY, UK

The EZ-KIT Lite evaluation system contains ESD (electrostatic discharge)

sensitive devices. Electrostatic charges readily accumulate on the human

body and equipment and can discharge without detection. Permanent

damage may occur on devices subjected to high-energy discharges. Proper

ESD precautions are recommended to avoid performance degradation or

loss of functionality. Store unused EZ-KIT Lite boards in the protective

shipping package.

ADSP-BF561 EZ-KIT Lite Evaluation System Manual v

CONTENTS

PREFACE

Product Overview ........................................................................... xi

Purpose of This Manual ................................................................ xiii

Intended Audience ........................................................................ xiii

Manual Contents ........................................................................... xiv

What’s New in This Manual ........................................................... xiv

Technical Support ........................................................................... xv

Supported Processors ...................................................................... xvi

Product Information ...................................................................... xvi

Analog Devices Web Site .......................................................... xvi

EngineerZone .......................................................................... xvii

Related Documents ...................................................................... xviii

Notation Conventions .................................................................. xviii

USING THE ADSP-BF561 EZ-KIT LITE

Package Contents .......................................................................... 1-2

Default Configuration ................................................................... 1-3

CCES Install and Session Startup .................................................. 1-4

Session Startup ........................................................................ 1-6

Contents

vi ADSP-BF561 EZ-KIT Lite Evaluation System Manual

VisualDSP++ Install and Session Startup ....................................... 1-8

CCES Evaluation License ........................................................... 1-10

VisualDSP++ Evaluation License ................................................. 1-11

Memory Map ............................................................................. 1-11

LEDs and Push Buttons .............................................................. 1-14

Audio Interface ........................................................................... 1-15

Video Interface ........................................................................... 1-16

Board Design Database ............................................................... 1-17

Example Programs ...................................................................... 1-18

Flash Programming Utility .......................................................... 1-18

ADSP-BF561 EZ-KIT LITE HARDWARE REFERENCE

System Architecture ...................................................................... 2-2

External Bus Interface Unit ..................................................... 2-3

SPORT Audio Interface .......................................................... 2-3

SPI Interface ........................................................................... 2-3

Programmable Flags ................................................................ 2-4

PPI Interfaces ......................................................................... 2-5

Video Output (PPI1) .......................................................... 2-7

Video Input (PPI0) ............................................................. 2-7

UART Port ............................................................................. 2-8

Expansion Interface ................................................................. 2-8

JTAG Emulation Port ............................................................. 2-9

ADSP-BF561 EZ-KIT Lite Evaluation System Manual vii

Contents

Jumper and DIP Switch Settings .................................................. 2-10

Video Configuration Switch (SW2) ....................................... 2-10

Boot Mode Switch (SW3) ...................................................... 2-11

Push Button Enable Switch (SW4) ......................................... 2-12

PPI Clock Select Switch (SW5) .............................................. 2-13

Test DIP Switches (SW10 and SW11) .................................... 2-13

Audio Enable Switch (SW12) ................................................ 2-13

SPIS1/SPISS Select (SW13) ................................................... 2-14

Video Encoder Clock Select Jumper (JP1) .............................. 2-14

VDDINT Select Jumpers (JP2 and JP3) ................................. 2-14

UART Loop Jumper (P1) ....................................................... 2-15

LEDs and Push Buttons .............................................................. 2-15

Reset Push Button (SW1) ...................................................... 2-16

Programmable Flag Push Buttons (SW6–9) ............................ 2-16

Power LED (LED1) ............................................................... 2-16

Reset LED (LED2) ................................................................ 2-17

USB Monitor LED (ZLED3) ................................................. 2-17

User LEDs (LED5–12, LED13–20) ....................................... 2-17

Connectors ................................................................................. 2-18

Expansion Interface (J1–3) .................................................... 2-19

Audio (J4 and J5) .................................................................. 2-19

Video (J6) ............................................................................. 2-20

Power (J7) ............................................................................. 2-20

RS-232 (P2) .......................................................................... 2-20

Contents

viii ADSP-BF561 EZ-KIT Lite Evaluation System Manual

SPORT1 (P3) ....................................................................... 2-21

SPI (P5) ................................................................................ 2-21

USB Debug Agent Connector (ZJ1) ...................................... 2-21

JTAG (ZP4) .......................................................................... 2-22

ADSP-BF561 EZ-KIT LITE BILL OF MATERIALS

ADSP-BF561 EZ-KIT LITE SCHEMATIC

INDEX

ADSP-BF561 EZ-KIT Lite Evaluation System Manual ix

PREFACE

Thank you for purchasing the ADSP-BF561 EZ-KIT Lite®, Analog

Devices, Inc. evaluation system for Blackfin®processors.

Blackfin processors embody a type of embedded processor designed specif-

ically to meet the computational demands and power constraints of

today’s embedded audio, video, and communications applications. They

deliver breakthrough signal-processing performance and power efficiency

within a reduced instruction set computing (RISC) programming model.

Blackfin processors support a media instruction set computing (MISC)

architecture. This architecture is the natural merging of RISC, media

functions, and digital signal processing (DSP) characteristics. Blackfin

processors deliver signal-processing performance in a microprocessor-like

environment.

Based on the Micro Signal Architecture (MSA), Blackfin processors com-

bine a 32-bit RISC instruction set, dual 16-bit multiply accumulate

(MAC) DSP functionality, and eight-bit video processing performance

that had previously been the exclusive domain of very-long instruction

word (VLIW) media processors.

x ADSP-BF561 EZ-KIT Lite Evaluation System Manual

The evaluation board is designed to be used in conjunction with the

CrossCore®Embedded Studio (CCES) and VisualDSP++®development

environments to test the capabilities of the ADSP-BF561 Blackfin proces-

sors. The VisualDSP++ development environment gives you the ability to

perform advanced application code development and debug, such as:

• Create, compile, assemble, and link application programs written

in C++, C, and ADSP-BF561 assembly

• Load, run, step, halt, and set breakpoints in application programs

• Read and write data and program memory

• Read and write core and peripheral registers

• Plot memory

Access to the ADSP-BF561 processor from a personal computer (PC) is

achieved through a USB port or an optional JTAG emulator. The USB

interface gives unrestricted access to the ADSP-BF561 processor and the

evaluation board peripherals. Analog Devices JTAG emulators offer faster

communication between the host PC and target hardware. Analog Devices

carries a wide range of in-circuit emulation products. To learn more about

Analog Devices emulators and processor development tools, go to

http://www.analog.com/dsp/tools.

The ADSP-BF561 EZ-KIT Lite provides example programs to demon-

strate the capabilities of the evaluation board.

Otros manuales para ADSP-BF561 EZ-KIT Lite

Tabla de contenidos

Otros manuales de Placa madre de Analog Devices

Analog Devices

Analog Devices ADP5063 Manual de usuario

Analog Devices

Analog Devices ADSP-2189M EZ-KIT Lite Manual de usuario

Analog Devices

Analog Devices 2787A Manual de usuario

Analog Devices

Analog Devices EVAL AD5933-U1 Manual de instrucciones

Analog Devices

Analog Devices EVAL-ADAQ4003FMCZ Manual de usuario

Analog Devices

Analog Devices Advantiv EVAL-ADV7611EB1Z Guía de inicio rápido

Analog Devices

Analog Devices SSM2167 Instrucciones de instalación y funcionamiento

Analog Devices

Analog Devices EVAL-AD5141DBZ Manual de usuario

Analog Devices

Analog Devices EV-ADF5355SD1Z Manual de usuario

Analog Devices

Analog Devices ADRF5549-EVALZ Manual de usuario

Analog Devices

Analog Devices MAX17614 Manual de usuario

Analog Devices

Analog Devices AD9510 Manual de usuario

Analog Devices

Analog Devices UG-213 Manual de usuario

Analog Devices

Analog Devices ADPA1107-EVALZ Manual de usuario

Analog Devices

Analog Devices EV-ADF4360-9EB1Z Manual de usuario

Analog Devices

Analog Devices EVAL-ADP2311 Manual de usuario

Analog Devices

Analog Devices ADGM1004EBZ Manual de usuario

Analog Devices

Analog Devices Blackfin A-V EZ-Extender Manual de usuario

Analog Devices

Analog Devices MAX25262 Manual de usuario

Analog Devices

Analog Devices AD9136/AD9135-EBZ Manual de usuario

Analog Devices

Analog Devices EVAL-AD8460SDZ Manual de usuario

Analog Devices

Analog Devices ADIS1650 Series Manual de usuario

Analog Devices

Analog Devices DC2897A Guía de configuración rápida

Analog Devices

Analog Devices Linear DC2515 Guía de configuración rápida

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario