Analog Devices Blackfin Audio EZ-Extender Manual de usuario
a
Blackfin®/SHARC®USB
EZ-Extender®Manual
Revision 1.1, July 2012
Part Number
82-000224-01
Analog Devices, Inc.
One Technology Way
Norwood, Mass. 02062-9106
Copyright Information
© 2012 Analog Devices, Inc., ALL RIGHTS RESERVED. This docu-
ment may not be reproduced in any form without prior, express written
consent from Analog Devices, Inc.
Printed in the USA.
Disclaimer
Analog Devices, Inc. reserves the right to change this product without
prior notice. Information furnished by Analog Devices is believed to be
accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use; nor for any infringement of patents or other rights of
third parties which may result from its use. No license is granted by impli-
cation or otherwise under the patent rights of Analog Devices, Inc.
Trademark and Service Mark Notice
The Analog Devices logo, Blackfin, CrossCore, EngineerZone, EZ-Board,
EZ-Extender, SHARC, and VisualDSP++ are registered trademarks of
Analog Devices, Inc.
All other brand and product names are trademarks or service marks of
their respective owners.
Regulatory Compliance
The Blackfin/SHARC USB EZ-Extender is designed to be used solely in a
laboratory environment. The board is not intended for use as a consumer
end product or as a portion of a consumer end product. The board is an
open system design which does not include a shielded enclosure and there-
fore may cause interference to other electrical devices in close proximity.
This board should not be used in or near any medical equipment or RF
devices.
The Blackfin/SHARC USB EZ-Extender is currently being processed for
certification that it complies with the essential requirements of the Euro-
pean EMC directive 89/336/EEC amended by 93/68/EEC and therefore
carries the “CE” mark.
The Blackfin/SHARC USB EZ-Extender board contains ESD (electrostatic
discharge) sensitive devices. Electrostatic charges readily accumulate on the
human body and equipment and can discharge without detection. Perma-
nent damage may occur on devices subjected to high-energy discharges.
Proper ESD precautions are recommended to avoid performance degrada-
tion or loss of functionality. Store unused extender boards in the protective
shipping package.
Blackfin/SHARC USB EZ-Extender Manual v
CONTENTS
PREFACE
Product Overview ....................................................................... viii
Purpose of This Manual ................................................................ ix
Intended Audience ........................................................................ ix
Manual Contents ........................................................................... x
What’s New in This Manual ........................................................... x
Technical Support ......................................................................... xi
Supported Products ...................................................................... xii
Product Information .................................................................... xii
Analog Devices Web Site ........................................................ xii
EngineerZone ........................................................................ xiii
Related Documents ...................................................................... xiv
BLACKFIN/SHARC USB EZ-EXTENDER INTERFACES
Blackfin/SHARC USB EZ-Extender Setup .................................... 1-1
USB Software ......................................................................... 1-2
USB 2.0 Interface ......................................................................... 1-2
Contents
vi Blackfin/SHARC USB EZ-Extender Manual
BLACKFIN/SHARC USB EZ-EXTENDER HARDWARE
REFERENCE
System Architecture ...................................................................... 2-2
Jumper Settings ............................................................................ 2-2
USB Chip Select Jumper (JP1) ................................................ 2-3
USB IRQ Jumper (JP2) ........................................................... 2-3
USB Soft Reset Jumper (JP3) .................................................. 2-3
BLACKFIN/SHARC USB EZ-EXTENDER BILL OF
MATERIALS
BLACKFIN/SHARC USB EZ-EXTENDER SCHEMATIC
INDEX
Blackfin/SHARC USB EZ-Extender Manual vii
PREFACE
Thank you for purchasing the Blackfin/SHARC USB EZ-Extender®,
Analog Devices, Inc. extender board to the EZ-Board®evaluation system
for the ADSP-BF518F, ADSP-BF526 Blackfin®, and ADSP-21469
SHARC®processors.
Blackfin processors are embedded processors that support a Media
Instruction Set Computing (MISC) architecture. This architecture is the
natural merging of RISC, media functions, and digital signal processing
characteristics towards delivering signal processing performance in a
microprocessor-like environment.
SHARC processors are based on a 32-bit super Harvard architecture that
includes a unique memory architecture comprised of two large on-chip,
dual-ported SRAM blocks coupled with a sophisticated IO processor,
which gives a SHARC processor the bandwidth for sustained high-speed
computations. SHARC processors represents today’s de facto standard for
floating-point processing, targeted toward premium audio applications.
The EZ-Board and Blackfin/SHARC USB EZ-Extender are designed to
be used in conjunction with the CrossCore®Embedded Studio (CCES)
and VisualDSP++®software development environments. The develop-
ment environment facilitates advanced application code development and
debug, such as:
• Create, compile, assemble, and link application programs written
in C++, C, and Blackfin/SHARC USB EZ-Extender assembly
• Load, run, step, halt, and set breakpoints in application programs
Product Overview
viii Blackfin/SHARC USB EZ-Extender Manual
• Read and write data and program memory
• Read and write core and peripheral registers
• Plot memory
To learn more about Analog Devices development software, go to
http://www.analog.com/processors/tools.
Product Overview
The Blackfin/SHARC USB EZ-Extender is a separately sold extender
board that plugs onto the expansion interface of the ADSP-BF518F,
ADSP-BF526, and ADSP-21469 EZ-Board evaluation systems. The
extender board aids the design and prototyping phases of the
ADSP-BF518F, ADSP-BF526, and ADSP-21469 processor targeted
applications.
The board extends the capabilities of the evaluation system by providing a
connection between the asynchronous memory bus of the Black-
fin/SHARC processor and a USB 2.0 device.
Please visit www.analog.com/EX2-USB for additional information, includ-
ing CCES support.
The following is a list of the Blackfin/SHARC USB EZ-Extender
interfaces.
• USB 2.0 interface:
• PLX Technology NET2272 device
• USB driver and application code
• No power supply required: derives power from the EZ-Board
• CE certified
Blackfin/SHARC USB EZ-Extender Manual ix
Preface
Before using any of the interfaces, follow the setup procedure in “Black-
fin/SHARC USB EZ-Extender Setup” on page 1-1.
Example programs are available to demonstrate capabilities of the Black-
fin/SHARC USB EZ-Extender board.
Purpose of This Manual
The Blackfin/SHARC USB EZ-Extender Manual provides instructions for
installing the product hardware (board). The text describes operation and
configuration of the board components. Finally, a schematic and a bill of
materials are provided as a reference for future designs.
Intended Audience
The primary audience for this manual is a programmer who is familiar
with Analog Devices processors. This manual assumes that the audience
has a working knowledge of the appropriate processor architecture and
instruction set.
Programmers who are unfamiliar with Analog Devices processors can use
this manual but should supplement it with other texts that describe your
target architecture. For the locations of these documents, see “Related
Documents”.
Programmers who are unfamiliar with CCES or VisualDSP++ should refer
to the online help and user’s manuals.
Manual Contents
x Blackfin/SHARC USB EZ-Extender Manual
Manual Contents
The manual consists of:
• Chapter 1, “Blackfin/SHARC USB EZ-Extender Interfaces” on
page 1-1
Provides basic board information.
• Chapter 2, “Blackfin/SHARC USB EZ-Extender Hardware Refer-
ence” on page 2-1
Provides information on the hardware aspects of the board.
• Appendix A, “Blackfin/SHARC USB EZ-Extender Bill of Materi-
als” on page A-1
Provides a list of components used to manufacture the
EZ-Extender board.
• Appendix B, “Blackfin/SHARC USB EZ-Extender Schematic” on
page B-1
Provides the resources to allow EZ-Board board-level debugging or
to use as a reference design.
What’s New in This Manual
This is revision 1.1 of the Blackfin/SHARC USB EZ-Extender Manual. The
manual has been updated to include CCES information. In addition,
modifications and corrections based on errata reports against the previous
manual revision have been made.
For the latest version of this manual, please refer to the Analog Devices
Web site.
Otros manuales para Blackfin Audio EZ-Extender
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Hardware de computadora de Analog Devices
Analog Devices
Analog Devices ADRV902 Series Manual de usuario
Analog Devices
Analog Devices ADSP-2106x SHARC Manual de usuario
Analog Devices
Analog Devices AD73360L Manual de usuario
Analog Devices
Analog Devices MicroConverter ADuC824 Manual de usuario
Analog Devices
Analog Devices SHARC ADSP-21368 Guía de aplicación
Analog Devices
Analog Devices EVAL-ADG5401FEBZ Manual de usuario
Analog Devices
Analog Devices EVAL-AD7606SDZ Manual de usuario
Analog Devices
Analog Devices Linear ADI Power LTC3310-1 Manual de usuario
Analog Devices
Analog Devices EZ-KIT Lite ADSP-21364 Guía del usuario
Analog Devices
Analog Devices DC3089A Manual de usuario
Analog Devices
Analog Devices CN-0506 Manual de usuario
Analog Devices
Analog Devices Linear LT3383 Guía de configuración rápida
Analog Devices
Analog Devices Linear ADP5070 Guía de configuración rápida
Analog Devices
Analog Devices EV-RPG2 Manual de usuario
Analog Devices
Analog Devices UG-397 Manual de usuario
Analog Devices
Analog Devices SHARC ADSP-21367 Manual de usuario
Analog Devices
Analog Devices ADSP-21065L EZ-KIT Lite Manual de usuario
Analog Devices
Analog Devices EVAL-ADF4152HVEB1Z Manual de usuario
Analog Devices
Analog Devices EVAL-ADAU1860 Manual de usuario
Analog Devices
Analog Devices MicroConverter ADuC832 Manual de usuario
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
