AMS TSL2521 Manual de usuario

Quick Start Guide

QG001002

TSL2521

TSL2521 EVM

Highly Sensitive Ambient Light Sensor with Selective

Flicker Detection and Fast Sampling for Use Behind

OLED or Auxiliary to Camera

v1-00 •2020-Dec-14

Document Feedback

TSL2521 ●TSL2521 EVM

Content Guide

Quick Start Guide •PUBLIC

QG001002 •v1-00 • 2020-Dec-14

9│2

Content Guide

1Out of the Box................................ 3

2Software Installation ..................... 4

3Connect Hardware......................... 7

4Start the Application ..................... 8

5Uninstall Application..................... 9

Document Feedback

TSL2521 ●TSL2521 EVM

Out of the Box

Quick Start Guide •PUBLIC

QG001002 •v1-00 • 2020-Dec-14

9│3

1 Out of the Box

For a detailed description of the TSL2521 TSL2521 EVMTSL2521 EVM, please refer to User

Guide:

●UG001001

Each TSL2521 Evaluation Kit comes with the following components:

Figure 1 :

Evaluation Kit Contents

No.

Item

Description

TSL2521 Daughter Card

PCB with TSL2521 sensor installed

EVM Controller Board

Used to communicate USB to I2C

USB Cable (A to Micro-B)

Connects EVM controller to PC

Flash Drive

Includes application installer and documents

Document Feedback

TSL2521 ●TSL2521 EVM

Software Installation

Quick Start Guide •PUBLIC

QG001002 •v1-00 • 2020-Dec-14

9│4

2 Software Installation

1. Plug the ams flash drive into an unused USB port

2. Double-click the Setup.exe file on the flash drive, or click Start > Run and type E:setup.exe and

press Enter. IMPORTANT: Use the appropriate drive letter in the above command to install the

software. Flash Drive will commonly be assigned the next available drive letter for example C:

hard drive, D: CD-ROM, E: flash drive

3. The Setup Wizard will open and guide you through the installation of the TSL2521 host

software, (Figure 2 through Figure 8)

4. The EVM Controller board requires the installation of FTDI CDM drivers. If these drivers are not

installed on your machine, this setup will automatically launch the installer for the FTDI drivers.

5. At the end of the installation, click Finish to exit the setup.

Figure 2:

Welcome Screen

Figure 3:

Liability Disclaimer

Document Feedback

TSL2521 ●TSL2521 EVM

Software Installation

Quick Start Guide •PUBLIC

QG001002 •v1-00 • 2020-Dec-14

9│5

Figure 4:

Select Installation Folder

Figure 5:

Select Start Menu Folder

Figure 6:

Installation in Progress

Figure 7:

Information Screen

Document Feedback

TSL2521 ●TSL2521 EVM

Software Installation

Quick Start Guide •PUBLIC

QG001002 •v1-00 • 2020-Dec-14

9│6

Figure 8:

Installation Completed Successfully

Document Feedback

TSL2521 ●TSL2521 EVM

Connect Hardware

Quick Start Guide •PUBLIC

QG001002 •v1-00 • 2020-Dec-14

9│7

3 Connect Hardware

Plug the TSL2521 Daughterboard into the Controller board (Figure 1). Always use ESD procedures

when handling the EVM.

Using the enclosed USB cable, plug the micro-B connector into the EVM module. Using the other end

of the cable, plug the USB A-connector into a USB port on the computer.

When the USB cable is connected, the green LED should light on power up to indicate that power is

being received via the USB interface, and the controller board processor is running. If the green LED

does not light, check the USB cable connections; unplug the USB cable and try again. If the green

LED still does not light, check the PC for USB error messages.

Document Feedback

TSL2521 ●TSL2521 EVM

Start the Application

Quick Start Guide •PUBLIC

QG001002 •v1-00 • 2020-Dec-14

9│8

4 Start the Application

To start the application select ams > TSL2521 EVM > TSL2521 EVM on the All Programs menu. The

default installation directory depending on the device and the operating system you are using is:

C:\Program Files\ams\TSL2521_EVM (Windows 32-bit operating systems)

C:\Program Files (x86)\ams\TSL2521_EVM (Windows 64-bit operating systems)

A different install path may be selected by the user during the install (Figure 4). When started, the

TSL2521 window will open on the PC and automatically connect to the hardware.

Document Feedback

TSL2521 ●TSL2521 EVM

Uninstall Application

Quick Start Guide •PUBLIC

QG001002 •v1-00 • 2020-Dec-14

9│9

5 Uninstall Application

To remove the software from your computer (Figure 9), select ams > TSL2521 EVM > Uninstall

TSL2521 EVM or use the Windows Control Panel.

Figure 9:

Remove Installation

Headquarters

ams AG

Tobelbader Strasse 30

8141 Premstaetten

Austria, Europe

Tel: +43 (0) 3136 500 0

Please visit our website at www.ams.com

Buy our products or get free samples online at www.ams.com/Products

Technical Support is available at www.ams.com/Technical-Support

Provide feedback about this document at www.ams.com/Document-Feedback

For sales offices, distributors and representatives go to www.ams.com/Contact

For further information and requests, e-mail us at ams_[email protected]om

translated, stored, or used without the prior written consent of the copyright owner.

ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property

damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any

kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or

liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services.

Tabla de contenidos

Otros manuales de Placa madre de AMS

AMS

AMS TSL2540 EVM Manual de usuario

AMS

AMS TMD2620 Manual de usuario

AMS

AMS Radon AS3993 Instrucciones de instalación y funcionamiento

AMS

AMS AS5048 Eval-Kit Manual

AMS

AMS AS7058 Manual de usuario

AMS

AMS AS3935 Manual de usuario

AMS

AMS AS3460 Manual de usuario

AMS

AMS AS621 Series Manual de usuario

AMS

AMS CCS811 Manual de usuario

AMS

AMS TCS3707 EVM Manual de usuario

AMS

AMS AS5600 Manual de usuario

AMS

AMS AS3956 Manual de usuario

AMS

AMS TMD2620-DB Manual de usuario

AMS

AMS AS5 47D-TO EK ST Series Manual de usuario

AMS

AMS TCS3701 Manual de usuario

AMS

AMS AN5000 Series Instrucciones de instalación y funcionamiento

AMS

AMS JetCis 130 Manual de usuario

AMS

AMS AS5-Series-47 Manual de usuario

AMS

AMS TSL2572 EVM Manual de usuario

AMS

AMS GP30-DEV-KIT Manual de usuario

AMS

AMS AS1119 Manual de usuario

AMS

AMS TSL2540 EVM Manual de usuario

AMS

AMS AS7030B Manual de usuario

AMS

AMS AS726x-iSPI Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario