AMS TSL2540 EVM Manual de usuario

Quick Start Guide

TSL2540 EVM

TSL2540 ALS, Light-to-Digital Sensor Evaluation Kit

Version 1.0

TSL2540 EVM Getting Started Guide

Page 2

Contents

1Out of the Box ......................................................................................................................3

2Software Installation.............................................................................................................3

3Connect Hardware ...............................................................................................................5

4Start the Application.............................................................................................................5

5Uninstall Application.............................................................................................................6

6Contact and Support............................................................................................................6

TSL2540 EVM Getting Started Guide

Page 3

1 Out of the Box

Each TSL2540 Evaluation Kit comes with the following components:

No.

Item

Description

TSL2540 Daughter Card

PCB with TSL2540 sensor installed

EVM Controller Board V2.2

Used to communicate USB to I2C

USB Cable (A to Mini-B)

Connects EVM controller to PC

Flash Drive

Include application installer and documents

Figure 1. Evaluation Kit Contents

2 Software Installation

1. Plug in the ams flash drive into an unused USB port.

2. Double-click the Setup.exe file on the flash drive, or click Start > Run and type E:setup.exe

and press Enter. IMPORTANT: Use the appropriate drive letter in the above command to

install the software. Flash Drive will commonly be assigned the next available drive letter for

example C: hard drive D: CD-ROM E: flash drive

3. The Setup Wizard will open and guide you through the installation of the TSL2540 host

software, (Figure 2 through 8).

4. At the end of the installation, click Finish to exit the setup.

TSL2540 EVM Getting Started Guide

Page 4

Figure 2. Welcome Screen Figure 3. Liability Disclaimer

Figure 4. Select Installation Folder Figure 5. Select Start Menu Folder

Figure 6. Installation in Progress Figure 7. Information Screen

TSL2540 EVM Getting Started Guide

Page 5

Figure 8. Installation Completed Successfully

3 Connect Hardware

Plug the TSL2540 Daughterboard into the Controller board. (Figure 1) Always use ESD procedures

when handling the EVM.

Using the enclosed USB cable, plug the mini-B connector into the EVM module. Using the other

end of the cable, plug the USB A-connector into a USB port on the computer.

When the USB cable is connected, the green LED should flash on power up to indicating that power

is being received via the USB interface, and the controller board processor is running. If the green

LED does not flash, check the USB cable connections; unplug the USB cable and try again. If the

green LED still does not flash, check the PC for USB error messages.

4 Start the Application

To start the application select ams > TSL2540 EVM > TSL2540 EVM on the All Programs menu.

The default installation directory depending on the device and the operating system you are using

is:

C:\Program Files\ams\TSL2540_EVM Windows 32 bit operating systems

C:\Program Files (x86)\ams\TSL2540_EVM Windows 64 bit operating systems

A different install path may be selected by the user during the install (Figure 4). When started, the

TSL2540 window will open on the PC and automatically connect to the hardware.

TSL2540 EVM Getting Started Guide

Page 6

5 Uninstall Application

To remove the software from your computer (Figure 9), select ams > TSL2540 EVM > Uninstall

TSL2540 EVM or use the Windows Control Panel.

Figure 9. Remove Installation

6 Contact and Support

For detail in using the TSL2540 EVM please refer to the User’s Guide included in the documents.

If any technical difficulties are encountered, use the Tech Support page at www.ams.com/Support

to submit a technical support request anytime or call (469) 298-4200 (main) M-F 8AM-5PM CST

You may also use www.ams.com to find worldwide local representatives in your area.

Otros manuales para TSL2540 EVM

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de AMS

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario