Amprobe TMA5 Manual de usuario

Users Manual

• Mode d’emploi

• Bedienungshandbuch

• Manual d’Uso

• Manual de uso

TMA5

Mini Vane Anemometer

TMA5

Mini Vane Anemometer

Users Manual

October 2009, Rev.2

English

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material

and workmanship for 1 year from the date of purchase. This

warranty does not cover fuses, disposable batteries or damage

from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are not

authorized to extend any other warranty on Amprobe’s behalf.

To obtain service during the warranty period, return the product

with proof of purchase to an authorized Amprobe Test Tools

Service Center or to an Amprobe dealer or distributor. See Repair

Section for details. THIS WARRANTY IS YOUR ONLY REMEDY.

ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR

STAUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR

A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY

DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR ANY

SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES

OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some

states or countries do not allow the exclusion or limitation of an

implied warranty or of incidental or consequential damages, this

limitation of liability may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or

for calibration should be accompanied by the following: your

name, company’s name, address, telephone number, and proof of

purchase. Additionally, please include a brief description of the

problem or the service requested and include the test leads with

the meter. Non-warranty repair or replacement charges should be

remitted in the form of a check, a money order, credit card with

expiration date, or a purchase order made payable to Amprobe®

Test Tools.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before

requesting repair. During the warranty period any defective test

tool can be returned to your Amprobe® Test Tools distributor

for an exchange for the same or like product. Please check the

“Where to Buy” section on www.amprobe.com for a list of

distributors near you. Additionally, in the United States and

Canada In-Warranty repair and replacement units can also be sent

to a Amprobe® Test Tools Service Center (see address below).

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada should be

sent to a Amprobe® Test Tools Service Center. Call Amprobe® Test

Tools or inquire at your point of purchase for current repair and

replacement rates.

In USA In Canada

Amprobe Test Tools Amprobe Test Tools

Everett, WA 98203 Mississauga, ON L4Z 1X9

Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Amprobe®

Test Tools distributor for a nominalv charge. Please check the

“Where to Buy” section on www.amprobe.com for a list of

distributors near you.

European Correspondence Address*

Amprobe® Test Tools Europe

In den Engematten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0

*(Correspondence only – no repair or replacement available from

this address. European customers please contact your distributor.)

1) Vane impeller

2) Precision thermister temp. sensor & capacitive

humidity sensor

3) LCD display

4) POWER and HOLD key

5) UNIT and MODE key

6) Battery compartment (on rear side)

7) Wrist strap holder

8) TPK60 probe socket

9) TPK60 probe

TMA5 Mini Vane Anemometer

WBTDP

MAXWCI

BFT/M/HKMHM/SKNT

EXT

4 5

1) Air velocity unit

2) Primary LCD display:

Air velocity, Air temperature, relative humidity,

Windchill (WCI), Dew point temp.(DP), Wet bulb temp.

(WBT), probe temp.(EXT) in turns.

3) Unit of temperature. oC or oF selectable

4) Max. velocity indicator

5) To freeze the latest display.

6) Low battery indicator

7) Humidity indicator and unit

POWER / HOLD KEY:

• To turn on the meter

• Press more than 3 seconds to turn off the

meter.e electricity waste and cost

• In normal mode, press to freeze the readings

• In power off mode, press more than 3 seconds

to disable the auto sleep mode.

UNIT / MODE KEY:

• In normal mode, press to display different

modes in turns: Velocity/Max. Velocity/Air

Temp./Relative Humidity/Windchill/Dew

Point Temp./Wet Bulb Temp./External Probe

Temperature.

• In air velocity mode, press these two keys to

change the air velocity unit.

• In any temperature mode, press these two

keys to change the temperature unit.

WBTDP

MAXWCI

BFT/M/HKMHM/SKNT

EXT

TMA5 Mini Vane Anemometer

CONTENTS

SYMBOLS..........................................................................2

UNPACKING AND INSPECTION .......................................2

INTRODUCTION ................................................................3

Features ........................................................................3

OPERATION.......................................................................3

Auto Power Off............................................................4

SPECIFICATION ................................................................. 4

MAINTENANCE AND REPAIR ..........................................6

Battery Replacement ...................................................7

TROUBLE SHOOTING .......................................................7

SYMBOLS

Caution! Refer to the explanation in this Manual

Conforms to relevant Australian standards

Complies with European Directives

Do not dispose of this product as unsorted

municipal waste.



WARNING and PRECAUTIONS

• The meter is accurate at low and mid-range

air speeds. Consistent use at very high speed;

i.e.: From the window of a fast-moving car

will damage the impeller’s bearing and cause

inaccuracy.

• When you program the meter and then restart

the meter, it will default to the last mode and unit

used.

• You can remove the transparent protection lm of

the LCD if you feel the display is blurred.

UNPACKING AND INSPECTION

Your shipping carton should include:

1 TMA5 meter

1 TPK60 probe

1 CR2032 battery

1 Manual

1 Soft pouch

1 Wrist strap

If any of the items are damaged or missing, return

the complete package to the place of purchase for an

exchange.

INTRODUCTION

Congratulations on your purchase of TMA5 mini

anemometer. A convenient instrument to measure air

ﬂow, temperature and humidity.

Features

• Compact size design with a wrist strap

• Precision thermistor sensor & capacitive humidity

sensor

• Easy two buttons operation

• Big display with 7 selectable units

• Data hold to freeze display

• External temperature probe included

• Auto power off

OPERATION

1. Hold the meter and target the air source from the

rear of the unit. When holding the meter, hold it at

arm’s length and away from your body.

2. Plug in the TPK60 probe if want to measure external

temperature.

3. Press“POWER/HOLD”button to turn on the meter.

4. The top LCD indicates the unit of wind speed and the

primary display indicates the value (Fig.1)

5. Press “POWER/HOLD” button to freeze the current

reading. The “H” icon appear on LCD. Press again to

release. (Fig.2)

6. Press“UNIT/MODE”button to switch the display from

wind speed to max wind speed, air temperature,

relative humidity, wind chill (WCI), Dew point temp.

(DP), Wet bulb temp.(WBT) and probe temp.(EXT)

Tabla de contenidos

Idiomas:

Otros manuales de Instrumento de medición de Amprobe

Amprobe

Amprobe MEGATEST 5000 Manual de usuario

Amprobe

Amprobe LM-200LED Manual de usuario

Amprobe

Amprobe TMD-10 Manual de usuario

Amprobe

Amprobe PRM-4 Manual de usuario

Amprobe

Amprobe NCV-1020 Manual de usuario

Amprobe

Amprobe ECB50A Manual de usuario

Amprobe

Amprobe THWD-3 Manual de usuario

Amprobe

Amprobe AT-2005-A Manual de usuario

Amprobe

Amprobe AT-6000-R Manual de usuario

Amprobe

Amprobe THWD-5 Manual de usuario

Amprobe

Amprobe SOLAR-500 Manual de usuario

Amprobe

Amprobe CT235A Manual de usuario

Amprobe

Amprobe ACD-3300 IND Manual de usuario

Amprobe

Amprobe ACD-400 Manual de usuario

Amprobe

Amprobe AM-270 Manual de usuario

Amprobe

Amprobe WT-30 Manual de usuario

Amprobe

Amprobe THWD-10 Manual de usuario

Amprobe

Amprobe AMP-25 Manual de usuario

Amprobe

Amprobe WT-50 Manual de usuario

Amprobe

Amprobe ACDC-620T Manual de usuario

Amprobe

Amprobe ADF-200 Manual de usuario

Amprobe

Amprobe TACH-10 Manual de usuario

Amprobe

Amprobe 3730217 Manual de usuario

Amprobe

Amprobe SM70 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario