AMG AMG4713Bx-SF Manual de usuario

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 1 of 12

AMG4713Bx-SF Instruction Sheet

D32035-00.doc

AMG4713Bx-SF

Instruction Manual

1 Channel Video Transmit Unit with up to 2 Bi-directional

Data and Audio Channels for a Singlemode Fibre Link

The AMG4713Bx-SF is a standalone one channel video transmit unit designed to transmit 1 video

signal and transmit and receive up to 2 data or audio signals over one Singlemode fibre.

The AMG4713Bx-SF is designed to be powered using an AMG2003 standalone power supply.

The AMG4713Bx-SF is designed to operate with AMG4714Bx-SF or rackmount equivalent

AMG4714BxR-SF four channel video receive unit in a point to point configuration.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 2 of 12

AMG4713Bx-SF Instruction Sheet

D32035-00.doc

Contents

Introduction 3

Unit Functional Schematic.................................................................................................................. 3

Optical Connection ............................................................................................................................. 3

Connections 4

Video Input Connections .................................................................................................................... 4

Optical Connections ........................................................................................................................... 4

Power Connection .............................................................................................................................. 4

Data and Audio Channel Connections ............................................................................................... 4

Data and Audio Channel Configuration 5

Data and Audio Channel Configuration.............................................................................................. 5

Data Interface Connections Channel A.............................................................................................. 5

Data Channel A Configuration............................................................................................................ 5

Data / Audio Channel B Configuration ............................................................................................... 6

Data Interface Daughter Board Options............................................................................................. 6

Audio / Data Interface Connections RJ45 - Channel B...................................................................... 6

Front Panel Indicators 7

Power LED.......................................................................................................................................... 7

Video Input LED’s ............................................................................................................................... 7

Fibre Optic LED’s ............................................................................................................................... 7

Low Speed Data LEDs ....................................................................................................................... 7

Physical Information 9

Dimensions......................................................................................................................................... 9

Mounting Details................................................................................................................................. 9

Removal / replacement from / to the Case......................................................................................... 9

Safety 9

Maintenance and Repair 9

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 3 of 12

AMG4713Bx-SF Instruction Sheet

D32035-00.doc

Introduction

Unit Functional Schematic

The AMG4713Bx-SF transmits up to 1

video and 2 data signals to the

AMG4714Bx-SF.

It also receives 2 data signal transmitted

from the AMG4714Bx-SF.

Optical Connection

The AMG4713Bx-SF is connected as illustrated below when used with an AMG4714Bx-SF 4-channel

receive unit acting as a point to point system.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 4 of 12

AMG4713Bx-SF Instruction Sheet

D32035-00.doc

Connections

Video Input Connections

No. of channels....................................1

Connector ............................................75 ohm BNC Socket.

Input Impedance..................................75 ohm terminated.

Input Level ...........................................1 volt p-p nominal

Frequency Response...........................10Hz to 7MHz.

Optical Connections

PRIMARY OPTO OUT

Connector ............................................LC/PC

Optical Fibre ........................................One fibre - Singlemode

Primary Optical Launch Power............-5dBm

Wavelength..........................................1550nm

Primary Optical Sensitivity...................-22dBm

Wavelength..........................................1310nm

Power Connection

Connector Type...................................2.1mm screw lock long power jack –centre positive

Connector Partno.................................Switchcraft S761K, AMG G16125-00

Supply Voltage.....................................13.5 to 18.0 Volts DC.

Maximum Power .................................10 Watts

Data and Audio Channel Connections

Total No. of Data Channels .................2 channels

DATA CHANNEL A

Data Channel A ...................................1 channel

Data Connector....................................RJ45

Channel A Interface On Board Data Interface –RS232, RS422 or RS485. Selected by slide switch

above the RJ45 connector.

RS485 –switch position - high (closest to BNC connections)

RS422 –switch position –middle

RS232 –switch position –low (furthest from BNC connections)

DATA CHANNEL B

Data Channel B ...................................1 channel

Data Connector....................................RJ45

Channel B Interface.............................Defined by data/audio interface daughter board fitted into Slot 1

on main board and indicated by the 'x' in the AMG partno.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 5 of 12

AMG4713Bx-SF Instruction Sheet

D32035-00.doc

Data and Audio Channel Configuration

The AMG4743Bx-SF and rackmount equivalent AMG4743BxR-SF sends and receives data to/from

Channel A and Channel B. Channel A is a single data interface selectable by the user with the slide

switch on the rear panel. Channel B carries a second channel of data / audio, the function and

physical interface being determined by the type of daughter board fitted to the B Channel data slot.

Data Interface Connections Channel A

RJ45 Pin

No.

Channel A

Cat 5/6 Cable

Colour Code T568B

RS485

[switch high]

RS422

[switch mid]

RS232

[switch low]

IN + (A)

GND

White/orange

IN - (B)

Orange

White/green

Blue

White/blue

Green

IN/OUT + (A)

OUT + (A)

N/A

White/brown

IN/OUT - (B)

OUT - (B)

OUT

Brown

Note: (A) or (B) in brackets in above table refers to RS485 / RS422 data specification, not Channel A,

Channel B.

Data Channel A Configuration

Channel A is always present and allows for a RS232, RS422 (full duplex, four wire) or RS485 (half

duplex, two wire) interface depending on the position of the switch located above the RJ45 connector.

The switch signifies the presence of the X16004 Low Speed Data/Audio Interface Board. If there are

LED's present on the RJ45 connector then an X16003 Ethernet Interface Board is fitted.

The data input for both the RS485 and the RS422 modes detects a tri-state input condition by

monitoring the differential voltage level across the input. A differential level below 600mV positive or

negative will be detected as a tri-state condition. A level above 600mV positive or negative will be

detected as a logic 1 or logic zero respectively. It is important therefore to terminate the RS485 bus or

the RS422 input bus using 120Ω if a pre-bias is present on the RS485 or RS422 bus.

A large number of third party equipment manufacturers apply a pre-bias on their RS485 bus. This pre-

bias is applied by pulling one arm of the RS485 bus high (+5 volts) and the other arm low (0 volts)

using high value resistors within the third party equipment. In order to ensure that the AMG equipment

detects a tri-state condition, then these resistors should have a value above 5kΩ. If the third party

bias resistors are less the 750Ω the bus can be double or triple terminated as required to ensure that a

tri-state level is detected.

Note: The Data Channel A is shipped from the factory set up for RS485 operation unless otherwise

requested.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 6 of 12

AMG4713Bx-SF Instruction Sheet

D32035-00.doc

Data / Audio Channel B Configuration

Data Channel B is operational when fitted with the appropriate daughter board.

Data Interface Daughter Board Options

The data interface daughter board options are as follows:

Option Code

'x'

Part No.

Description

X12542

4 Wire Audio Interface Daughter Board

X04057

RS422/485 Data Interface Daughter Board

X04049

RS232 Data Interface Daughter Board

X04058

20mA Current Loop Data Interface Daughter Board

X12579

TTL Data Interface Daughter Board

X12578

Contact Closure Data Interface Daughter Board

X13038

FTT10A Echelon Lonworks Data Interface Daughter Board

Audio / Data Interface Connections RJ45 - Channel B

RJ45 Channel B low speed data/audio interface connections:

RJ45 Pin

No.

Channel B

Cat 5/6 Cable

Colour Code T568B

Data / Audio

Daughter Board

White/orange

Orange

OUT + (A)

White/green

IN - (B)

Blue

IN + (A)

White/blue

OUT - (B)

Green

White/brown

Brown

Note: (A) or (B) in brackets in above table refers to RS485 / RS422 data specification, not Channel A,

Channel B.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 7 of 12

AMG4713Bx-SF Instruction Sheet

D32035-00.doc

Front Panel Indicators

Power LED

Power ..................................................Green - unit powered

Off - no power applied to unit

Video Input LED’s

Video Present CH1..............................Green - video signal present on input BNC

R/G - channel present but no video on I/P BNC

Fibre Optic LED’s

Primary Opto Sync TX.........................Green - optical channel transmitting

Off - optical channel not transmitting

Primary Opto Sync RX ........................Green - optical channel receiving

Org - optical channel receiving but not sync.

Off - optical channel not transmitting

Low Speed Data LEDs

Channel A

Data Present TX (RS485 or RS422)...Green - logic zero (+V, -V) present on IN+, IN-

Red - logic one (-V,V+) present on IN+, IN-

Off - tri-state off or no connection on IN+, IN-

Data Present TX (RS232) ...................Green - logic zero (+V) present on input IN+

Red - logic transitions present on input IN+

Off - logic one (-V) present on input IN+

This represents the data signals being transmitted on the optical fibre

Data Present RX (RS485 or RS422)...Green - logic zero (+V,-V) present on OUT+, OUT-

Red - logic one (-V,+V) present on OUT+, OUT-

Off - tri-state off or no connection on OUT+, OUT-

Data Present RX (RS232)...................Green - logic zero (+V) present on OUT+

Red - logic transitions present on OUT+

Off - logic one (-V) present on OUT+

This represents the data signals being received on the optical fibre

Channel B (When RS232 data daughter board fitted)

Data Present TX..................................Green - logic zero (+V) present on IN+

Red - logic transitions present on IN+

Off - logic one (-V) present on IN+

This represents the data signals being transmitted on the optical fibre

Data Present RX..................................Green - logic zero (+V) present on OUT+

Red - logic transitions present on OUT+

Off - logic one (-V) present on OUT+

This represents the data signals being received on the optical fibre

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 8 of 12

AMG4713Bx-SF Instruction Sheet

D32035-00.doc

Channel B (When RS485 / RS422 data daughter board fitted)

Data Present TX ..................................Green - logic zero (+V, -V) present on IN+, IN-

Red - logic transitions present on IN+, IN-

Off - logic one (-V, +V) present on IN+, IN-

This represents the data signals being transmitted on the optical fibre

Data Present RX..................................Green - logic zero (+V, -V) present on OUT+, OUT-

Red - logic transitions present on OUT+, OUT-

Off - logic one (-V , +V) present on OUT+, OUT-

This represents the data signals being received on the optical fibre

Channel B (When audio daughter board fitted)

Audio Present TX.................................Green - audio present > -40dBm

Red - audio present > 0dBm (overload at +6dBm)

Off - audio not present or < -40dBm

This represents the audio signals being transmitted on the optical fibre

Audio Present RX ................................Green - audio present > -40dBm

Red - audio present > 0dBm (overload at +6dBm)

Off - audio not present or < -40dBm

This represents the audio signals being received from the optical fibre.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 9 of 12

AMG4713Bx-SF Instruction Sheet

D32035-00.doc

Physical Information

Dimensions

Height..................................................112mm

Width ...................................................170mm (excluding connectors)

Depth...................................................35mm

Weight .................................................750grams

Mounting Details

The AMG unit is supplied with a clip-on mounting bracket which should be attached to a panel or wall

using 2 off 4.0mm screws, see diagram on page 1 for dimensions. The unit is clipped into the

mounting bracket, and is then held firmly in position.

Removal / replacement from / to the Case

Note: - The AMG unit PCB's are static sensitive. Handle with proper care and use normal electrostatic

discharge (ESD) procedures. Use properly grounded protection (for example, wrist straps) when

handling the PCB.

To remove units from the case to access the data expansion boards and the daughter boards, remove

the 2 or 4 fixing screws on the rear panel and slide the PCB's out of the case.

Ensure that the fibres do not snag or get trapped.

To replace the PCB's into the case, slide the PCB's gently into the case aligning the boards with the

appropriate slots. Ensure that the fibre do not snag or get trapped.

Safety

AMG Optical Fibre Products use Class 1 laser systems in accordance with EN 60825-2:2000.

It is always advisable to follow good practice when working with optical fibre systems. This includes:

Do not stare with unprotected eyes or with any unapproved collimating device at fibre

ends or connector faces, or point them at other people.

Use only approved filtered or attenuating viewing aids

For other safety issues and advice on good practice associated with optical fibre systems, please see

EN 60825-2:2000 or your local safety officer.

Maintenance and Repair

There are no user serviceable parts within AMG products. See unit data sheet for full specification.

In case of problem or failure, please call your local support centre or contact: AMG Systems Ltd. at

3 The Omega Centre, Stratton Business Park, Biggleswade, Beds., SG18 8QB, UK.

Phone +44 (0) 1767 600 777

Technical Support +44 (0) 1767 604 491

Email techsupport@amgsystems.com

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 10 of 12

AMG4713Bx-SF Instruction Sheet

D32035-00.doc

This page is intentionally blank.

Tabla de contenidos

Otros manuales de Transmisor de AMG

AMG

AMG AMG4723 Manual de usuario

AMG

AMG AMG4683ER Manual de usuario

AMG

AMG AMG4643B E-SF Series Manual de usuario

AMG

AMG AMG5611R Manual de usuario

AMG

AMG AMG4684B R Series Manual de usuario

AMG

AMG AMG4681-1550-C Manual de usuario

AMG

AMG AMG4687BE Manual de usuario

AMG

AMG AMG4707AEG Manual de usuario

AMG

AMG AMG5913-2A9 Manual de usuario

AMG

AMG AMG4707A-DR-SF Manual de usuario

AMG

AMG AMG5525 Manual de usuario

AMG

AMG AMG4781ER Manual de usuario

AMG

AMG AMG4787R-SF Manual de usuario

AMG

AMG AMG4647-ULTRA1 Manual de usuario

AMG

AMG AMG4683E Manual de usuario

AMG

AMG AMG4783R-SF-CWDMn-C Manual de usuario

AMG

AMG AMG6781 Manual de usuario

AMG

AMG AMG5901 Manual de usuario

AMG

AMG AMG2648 Manual de usuario

AMG

AMG AMG4707 Manual de usuario

AMG

AMG AMG5513A6B9 Manual de usuario

AMG

AMG AMG4783BxE-SF Manual de usuario

AMG

AMG AMG4687BER Manual de usuario

AMG

AMG AMG5903A966B9 Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario