American Changer Corp. AC401-2 Guía de configuración

Manual AC401-2 082516

American Changer

AC401-2

Installation,

Operation, and

Service Manual

Changing the Industry℠

Installers & Service Technicians

Read and understand the instructions

detailed in this manual.

Owners & Operators

Keep this manual in a safe place to

provide to any service technicians

working on this machine.

American Changer

1400 N.W. 65th Place, Ft. Lauderdale, FL 33309

Tel (954) 917-3009 • Fax (954) 917-3079

www.americanchanger.com www.hoffmanmint.com

Table of Contents

Section 1 –Product Overview

1.1 –Machine Specifications……………………………………………………………………………………………………………..

1.2 –Warranty Information……………………………………………………………………………………………………………….

1.3 –Machine Safety…………………………………………………………………………………………………………………………

Section 2 –Setup & Installation

2.1 –Setup…………………………………………………………………………………………………………………………………………

2.2 –Mounting Instructions……………………………………………………………………………………………………………….

Section 3 –Operational Overview

3.1 –Component Description…………………………………………………………………………………………………………..

3.2 –Functional Description……………………………………………………………………………………………………………..

3.3 –Programming Menu……………………………….…………………………………………………………………………………

3.4 –Configuring the Machine…………………..………………………………………………………………………………………

3.5 –Out-of-Service Conditions..…………………………….…………………………………………………………………………

3.6 –Bill Validator Front Bezel Flash Codes………………………………………………………………………………………..

Section 4 –Maintenance

4.1 –Bill Validator Maintenance………………………………………………………………………………………………………..

4.2 –Coin Hopper Maintenance…………………………………………………………………………………………………………

4.3 –Parts List……………………………………………………………………………………………………………………………………

4.4 –Warranty Terms and Conditions………………………………………………………………………………………………..

copyrights herein may be reproduced or copied in any

form or by means –graphic, electronic or mechanical,

including photocopying, recording, taping or information

storage and retrieval systems –without the written

permission of American Changer

Section 1 –Product Overview

1.1 –Machine Specifications

Operating Voltage

12VDC

Power Consumption

120 Watts Max

Operating Temperature

0°F to 120°F / -18°C to 49°C

Battery Type

Sealed Lead-Acid

Battery Life

4-6 weeks on full charge

Cabinet Dimensions

14.25”W x 22.73”H x 12.5”D

36.2cm W x 57.72cm H x 31.75cm D

Machine Dry Weight

62 lbs / 28.12 kg

*Note: Specifications stated herein may vary without notice. Capacities are approximations and may

vary.

1.2 –Warranty Information

PLEASE REFERENCE SECTION 4.4 ON PAGE’S 21 AND 22 FOR AMERICAN CHANGER’S DETAILED LIMITED

WARRANTY AND EXCLUSIVE REMEDIES. SOME HIGHLIGHTS FROM SAID SECTION ARE:

Bill Validators and Bill Dispensers

Validators and Bill Dispensers are warranted for two years from date of purchase.

Coin Hopper(s) and Logic Board

These items are warranted for one year from date of purchase.

COVERED

Manufacturers’ defects in workmanship or materials

NOT COVERED

Damage caused by shipping or physical abuse

Misapplication

Vandalism

End users’ attempt, on their own, to repair components

Cleaning and maintenance

Power surges and lightning strikes

A Return Material Authorization number (RMA #) must be obtained from American Changer Corporation before

returning a unit for repair; warranty or otherwise. A copy of invoices must accompany any and all warranty

work.

Section 1.3 –Machine Safety

Your safety and the safety of others are very important to

American Changer.

We have provided important safety messages in this manual and on your machine. Always read and

obey all safety messages.

All safety messages will tell you what the potential hazard is, and tell you what can happen if the

instructions are not followed.

This is a safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either “DANGER”,

“WARNING”, or “CAUTION”.

These words mean:

You can be killed or seriously injured if you don’t immediately

follow instructions

You can be killed or seriously injured if you don’t follow

instructions

You can be injured if you don’t follow instructions

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to

publish a list of substances known to the state of California to cause cancer, birth defects, or other

reproductive harm, and requires businesses to warn of potential exposure to such substances.

Important Safety Instructions

DANGER: To reduce the risks of severe injury

secure the machine to a stable structure.

WARNING: To reduce the risk of electrical shock,

disconnect all electrical power to the machine

before servicing.

NOTICE: For indoor use only.

NOTICE: Ensure this machine is level when

installed

SAVE THESE INSTRUCTIONS

American Changer does not guarantee machines (products) or services to be 100% secure against criminal

attempts. All machines (products) and services are to be used in accordance with business best practices and the

owner’s or operator’s best judgement.

Installation, use, service and maintenance must be performed in accordance with applicable machine (product)

manuals provided by American Changer and comply with any and all pertinent laws or regulations.

Inspect your machine (product), at a minimum annually, by a qualified service technician.

Dimensions and weights are reasonably close estimates. Specifications in this manual can vary without notice.

Section 2 –Setup & Installation

2.1 –Setup

NOTICE: THIS MODEL MACHINE IS FOR INDOOR USE ONLY.

Inspect for any connectors or components that may have been dislodged during shipping. The lock and

keys for your changer will be inside the manila envelope along with this manual and other pertinent

information. To install the lock, insert the cylinder into the hole in the middle of the T-handle and push

until it stops. Turn the key until you hear it “snap." Turn the key counterclockwise ¼ turn and remove

the keys.

NOTE: The only way to get a duplicate set of keys made is to save the tag that comes with the keys.

This ID # starts with “AC or ACC ####.” If you purchased Medeco locks with your machine the ID will

begin with “7RA ####.”

SHIPPING DAMAGE: If the machine was damaged in shipping contact your distributor or American

Changer immediately. The shipping carrier needs to be notified in a timely manner.

TEST: Before permanently installing the machine, do a functional test to verify that there is no shipping

damage to your new changer. Install and connect the battery as shown in the below picture. The

machine is preset to accept $1 and $5 U.S. dollar bills and pay out 4 coins per dollar (unless otherwise

specified at the time of purchase).

Install the battery as shown in Figure 1 and connect the power harness. Fill the hoppers with a minimum

of 100 coins. On the Main Logic Board, turn the switch on the bottom right corner “ON.” The rocker

switch has an “I” and “O” printed on it. When the “I” is pressed down, the changer is “ON.” If the

machine does not function properly please contact American Changer’s Technical Support Department

at service@americanchanger.com or 1-888-741-9840.

2.2 –Mounting Instructions

This machine must be installed in accordance with local codes. If you are unsure in any way what your

local codes are or unsure of anything in the following steps, please hire a licensed professional to

mount your machine.

1. Disconnect the battery and remove it from the cabinet.

2. Remove the hoppers from the cabinet.

3. Locate the 4 punch-outs on the back or side wall of the changer. Using a screwdriver and hammer,

remove the punch-outs by striking them from the inside of the machine.

4. Find an appropriate stable structure which to secure the machine to.

Battery

Power

Harness

Figure 1

5. NOTICE: BEFORE SECURING ENSURE THE MACHINE IS LEVEL.

6. : PROPERLY SECURE MACHINE (PRODUCT) TO THE FLOOR OR STABLE STRUCTURE

SO THE MACHINE (PRODUCT) CANNOT BE MOVED OR TIPPED. USE STRUCTURAL SOUND

FASTENERS THAT CAN BE PROPERLY TIGHTENED AND SECURE THE MACHINE (PRODUCT)

THROUGH EACH OF THE HOLES IN THE BASE OF THE MACHINE (PRODUCT) TO THE APPLICABLE

SURFACE TO WHICH IT IS BEING SECURED.

7. Verify that the machine is properly secured to the stable structure.

8. Installation is completed.

Section 3 –Operational Overview

3.1 –Component Description

Coin Hopper(s)

Suzo Evolution Hopper

Applicable Coin Sizes:

Diameter: 21.01mm ~

30.0mm

Thickness: 1.25mm ~ 3.3mm

An option is available to

dispense smaller coins.

Approximate capacity is 1,500

25mm diameter coins.

Asahi WH-3 Hopper

Applicable Coin Sizes:

Diameter: 24.3mm ~ 39.0mm

Thickness: 1.6mm ~ 3.3mm

Approximate capacity is 550

30.8mm (US 50¢) diameter

coins.

Put coins into this opening

Coin Counting Optic

Motor

12-Pin female connector

(located in rear of hopper)

Put coins into this

opening

Coin Exit

Motor

Coin Counting

Sensor

Figure 2

Figure 3

Tabla de contenidos

Manuales populares de Cambiar coche de otras marcas

American Changer

American Changer AC6007 Manual de usuario

American Changer

American Changer AC2007 Manual de usuario

Coinco

Coinco vortex Instrucciones de funcionamiento originales

Coinco

Coinco Guardian 6000 Manual de usuario

Comestero

Comestero Suzohapp Multi PRO Manual de usuario

Alberici

Alberici Hira 2 Series Manual de usuario

Coinco

Coinco CoinPro 3 Manual de operación

Hamilton Manufacturing Corporation

Hamilton Manufacturing Corporation DRS Guía de inicio rápido

Alberici

Alberici HammerOne S11 Manual de usuario

Vetus

Vetus IVPS Hoja de especificaciones

Alberici

Alberici Spike CM Arm Manual de usuario

MEI

MEI EC6000 Guía del usuario

Conlux

Conlux CCM5 series Manual de usuario

MEI

MEI CashFlow 560 Guía del usuario

American Changer

American Changer AC1001 Guía de configuración

MEI

MEI CASHFLOW 7000 Series Guía del usuario

ABACUS

ABACUS AB-1002 Manual de usuario

Alberici

Alberici HIRA ONE Manual de usuario