Allo RemoteControl GENIUS JA334 Manual de usuario

GENIUS JA334/ JA332

INSTRUCTIONS

Visit our website: www.Alloremotecontrol.com

Visit our website: www.Alloremotecontrol.com

Programming a Master Remote to the Control Board:

1. Simultaneously press push-buttons P1 and P2 of the Remote and release them when the LED

flashes (after about one second)

2. Press and hold down the learning button on the control panel receiver, the LED must flash –Keep

button pressed. Do not release.

3. Press and hold down button P1 (on the remote: the transmitter’s LED now goes on with a steady

light –also keep this button pressed until step 4 is complete.

4. Check that the control panel receiver LED changes to a steady light for a couple of seconds to

confirm that the “system code” was saved. You can now release the button.

5. Release the button of the remote. This remote is now the “Master remote”

Programming a Remote from the Existing Master Remote:

1. Simultaneously press buttons P1 and P2 of the Master Remote and release them when the LED

flashes (after about one second);

2. Now bring into contact (touching) the master remote and the remote to be programmed

3. On the master remote press and keep held down the same button that was used to create the

master remote: the LED will go on with a steady light (TIP, if the master remote coding instructions

were followed then the button will be P1)

4. Press the required button on the remote to be coded (fig.6 ref.D) and release it when the LED goes

off after flashing twice to confirm code has been copied.

5. Release the button of the Master remote.

6. Repeat this procedure using the master remote for every remote to be coded.

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Mando a distancia de Allo RemoteControl

Allo RemoteControl

Allo RemoteControl SOMFY Keytis Manual de usuario

Allo RemoteControl

Allo RemoteControl RIB SUN T433 4CH Manual de usuario

Allo RemoteControl

Allo RemoteControl FAAC SLH Manual de usuario

Allo RemoteControl

Allo RemoteControl CARDIN S435 Manual de usuario

Allo RemoteControl

Allo RemoteControl ALLDUCKS 6204 Manual de usuario

Allo RemoteControl

Allo RemoteControl APRIMATIC UNICO RR-SE Manual de usuario

Allo RemoteControl

Allo RemoteControl CAME T434 Manual de usuario

Allo RemoteControl

Allo RemoteControl SEA Head 433 2 Manual del propietario

Allo RemoteControl

Allo RemoteControl Prastel SLIM2E Manual de usuario

Allo RemoteControl

Allo RemoteControl SOMMER 4004 Manual de usuario

Allo RemoteControl

Allo RemoteControl NICE HSCU2W Manual de usuario

Allo RemoteControl

Allo RemoteControl BERNER Manual de usuario

Allo RemoteControl

Allo RemoteControl WHY EVO Manual de usuario

Allo RemoteControl

Allo RemoteControl PROGET ETY 433 4N Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación