Allo RemoteControl FAAC SLH Manual de usuario

INSTRUCTIONS

Programming from an already activated remote control:

1. Press both buttons on the working remote control until the light flashes

2. When the LED flashes, press and hold the button you normally use for operating your

system

3. Put the remotes head to head and press and hold in the same button on the new remote

control

4. The LED will flash 3 times and then goes out

5. Your new remote control is now programmed

Programming on the receiver:

1. Power up the system after installing and connecting the electrical components of the 868

SLH System (fig.1).

2. Use a master TX to set the “system code” on the decoding card/RP receiver (see “system

coding”).

3. Use the same master TX to set the system code on the system's other TXs

4. Coded TXs are automatically stored in the decoding card/ RP receiver by simply

activating the transmitter channel twice in succession within 5 seconds.

Visit our website: www.Alloremotecontrol.com

FAAC SLH

Visit our website: www.Alloremotecontrol.com

System coding :

System coding:

1. Simultaneously press push-buttons P1 and P2 of the master TX and release them when

the LED flashes (after about one second)

2. Press and hold down the learning button on the decoding card/RP receiver: the LED must

flash

3. While the master transmitter’s LED is flashing, press and hold down a channel (the

transmitter's LED goes on with steady light)

4. Before releasing the learning button on the decoding card/ RP receiver, check if the LED

goes on with steady light for a couple of seconds to confirm that the “system code” was

saved.

5. Release the button of the Master TX channel.

Visit our website: www.Alloremotecontrol.com

Tabla de contenidos

Otros manuales de Mando a distancia de Allo RemoteControl

Allo RemoteControl

Allo RemoteControl BERNER Manual de usuario

Allo RemoteControl

Allo RemoteControl PROGET ETY 433 4N Manual de usuario

Allo RemoteControl

Allo RemoteControl GENIUS JA334 Manual de usuario

Allo RemoteControl

Allo RemoteControl APRIMATIC UNICO RR-SE Manual de usuario

Allo RemoteControl

Allo RemoteControl Prastel SLIM2E Manual de usuario

Allo RemoteControl

Allo RemoteControl CAME T434 Manual de usuario

Allo RemoteControl

Allo RemoteControl ALLDUCKS 6204 Manual de usuario

Allo RemoteControl

Allo RemoteControl SOMFY Keytis Manual de usuario

Allo RemoteControl

Allo RemoteControl SOMMER 4004 Manual de usuario

Allo RemoteControl

Allo RemoteControl NICE HSCU2W Manual de usuario

Allo RemoteControl

Allo RemoteControl WHY EVO Manual de usuario

Allo RemoteControl

Allo RemoteControl RIB SUN T433 4CH Manual de usuario

Allo RemoteControl

Allo RemoteControl CARDIN S435 Manual de usuario

Allo RemoteControl

Allo RemoteControl SEA Head 433 2 Manual del propietario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación