Allo RemoteControl BERNER Manual de usuario

BERNER

Visit our website: www.Alloremotecontrol.com

INSTRUCTIONS

Assigning a button function:

The radio receiver has two channels for the control of two functions. Before

you can use the hand transmitter(s), you must assign the desired function in

the radio receiver to a button on the hand transmitter

Assigning a button function for channel 1:

1. Briefly press the P button (programming button) on the receiver. The LED

will begin to light up.

2. Press the desired button on the hand transmitter for at least three seconds

until the LED goes out.

3. Release the button. The receiver is ready to receive

Assigning a button function for channel 2

1. Briefly press the P button (programming button) on the receiver. The LED

will begin to light up.

2. Press the P button again. The LED will go out and then light up again.

3. Press the desired button on the hand transmitter for at least three seconds

until the LED goes out.

4. Release the button. The receiver is ready to receive.

Checking programming:

Press the programmed button on the transmitter

The command will be issued and the LED on the receiver will light up

Note: There must be a distance of at least 1 m between the transmitter and

the receiver. If the hand transmitter does not work, try to assign a button

function to the channel again

Visit our website: www.alloremotecontrol.com

Cancelling the programming procedure:

• If no programming is performed within 60 seconds after the P button is

pressed, the receiver's LED will go out.

• If you press the P button three times in a row, the receiver's LED will go

out and the programming procedure will be cancelled.

Tabla de contenidos

Otros manuales de Mando a distancia de Allo RemoteControl

Allo RemoteControl

Allo RemoteControl APRIMATIC UNICO RR-SE Manual de usuario

Allo RemoteControl

Allo RemoteControl Prastel SLIM2E Manual de usuario

Allo RemoteControl

Allo RemoteControl NICE HSCU2W Manual de usuario

Allo RemoteControl

Allo RemoteControl WHY EVO Manual de usuario

Allo RemoteControl

Allo RemoteControl SOMFY Keytis Manual de usuario

Allo RemoteControl

Allo RemoteControl CARDIN S435 Manual de usuario

Allo RemoteControl

Allo RemoteControl FAAC SLH Manual de usuario

Allo RemoteControl

Allo RemoteControl CAME T434 Manual de usuario

Allo RemoteControl

Allo RemoteControl SEA Head 433 2 Manual del propietario

Allo RemoteControl

Allo RemoteControl PROGET ETY 433 4N Manual de usuario

Allo RemoteControl

Allo RemoteControl ALLDUCKS 6204 Manual de usuario

Allo RemoteControl

Allo RemoteControl RIB SUN T433 4CH Manual de usuario

Allo RemoteControl

Allo RemoteControl GENIUS JA334 Manual de usuario

Allo RemoteControl

Allo RemoteControl SOMMER 4004 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación