Allied GB2450 Manual de usuario
Allied Vision Technologies Canada Inc.
101-3750 North Fraser Way
Burnaby, BC
V5J 5E9 / Canada
USER MANUAL
June 7, 2010
GB2450
GB2450C
GB2450-V
GB2450C-V
GB2450 User Manual
70-0046A-A
AVT Inc.
ii
Table of Contents
Table of Contents............................................................................................................................ ii
Introduction.................................................................................................................................1
Precautions ..................................................................................................................................1
Warranty......................................................................................................................................1
Specifications ..............................................................................................................................2
Supported Features......................................................................................................................3
Mechanical ..................................................................................................................................4
Connections.................................................................................................................................7
Cleaning the Sensor...................................................................................................................11
Adjusting the C-mount..............................................................................................................12
Camera Installation....................................................................................................................13
System Optimization.................................................................................................................18
Trouble Shooting.......................................................................................................................20
Addendum......................................................................................................................................21
GB IO Schematic.......................................................................................................................22
Isolated Trigger Schematic........................................................................................................23
Non-isolated Trigger Schematic................................................................................................24
Video Iris Schematic .................................................................................................................25
Trigger Timing Diagram ...........................................................................................................26
Notes on Triggering...................................................................................................................27
GB2450 User Manual
70-0046A-A
AVT Inc.
1
Introduction
The GB2450 series of cameras are single board, 5 megapixel, 15 frames per second, Gigabit
Ethernet
cameras based on the Sony ICX625ALA and ICX625AQA, Super HAD CCD sensors.
Precautions
READ INSTALLATION GUIDE CAREFULLY.
This document contains specific information which is necessary for the correct operation and
treatment of this product.
USE ESD PRECAUTIONS WHEN HANDLING PRODUCT.
This camera contains sensitive components which can be damaged if handled incorrectly.
KEEP SHIPPING MATERIAL.
Poor packaging of this product can cause damage during shipping.
VERIFY ALL EXTERNAL CONNECTIONS.
Verify all external connections in terms of voltage levels, power requirements, voltage polarity,
and signal integrity prior to powering this device.
CLEANING.
This product can be damaged by some volatile cleaning agents. Avoid cleaning the image sensor
unless absolutely necessary. Please see instructions on sensor cleaning in this document.
DO NOT EXCEED ENVIRONMENTAL SPECIFICATIONS.
See environmental specifications limits in the Specifications section of this document.
Warranty
Please contact Prosilica.
GB2450 User Manual
70-0046A-A
AVT Inc.
2
Specifications
Sensor Type Sony ICX625ALA CCD (ICX625AQA for color)
Sensor Shutter Type Progressive Interline
Image Resolution 2448 x 2050 pixels
Pixel Size 3.45µm x 3.45µm
Optical Format 2/3 inch
Lens Mount C-mount with adjustable back focus (CS-mount available)
Color Sensor Filter Pattern
†
Bayer
Full Resolution Frame Rate 15.1 fps
Frame Rate (1900 x 1080 ROI) 24.6 fps
I/O 1 isolated input/output, 1 non-isolated input/output,
1 RS-232 input/output
Power Requirements Less than 3.8W
††
(5V to 16V)
†††
A/D 14 bit
Output 12 bit
Trigger latency* 2us for non-isolated I/O, 10us for isolated I/O
Trigger Jitter* ±20ns for non-isolated I/O, ±0.5us for isolated I/O
Tpd* 10ns for non-isolated I/O, 1.3us for isolated I/O
Operating Temperature 0 to 70 Celsius***
Operating Humidity 20 to 80% non-condensing
Weight 54g
Hardware Interface Standard IEEE 802.3 1000BASE-T, 100BASE-TX
Software Interface Standard GigE Vision Standard 1.0
Regulatory RoHS
† Applies to GB2450C only.
†† Power consumption will increase with reduced ROI imaging and color interpolation.
††† Nominal operating voltage is 12V. Cameras have been tested at 12V.
* See Notes on Triggering in the Addendum.
***DUE TO THE SMALL PACKAGING AND HIGH SPEED OF THE GB CAMERAS, SPECIAL
CARE IS REQUIRED TO MAINTAIN A REASONABLE OPERATING TEMPERATURE. IF THE
CAMERA IS TO BE OPERATED IN A WARM ENVIRONMENT, IT IS SUGGESTED THAT THE
CAMERA BE MOUNTED ON A HEAT SINK SUCH AS A METAL BRACKET AND THAT
THERE IS SUFFICIENT AIR FLOW.
GB2450 User Manual
70-0046A-A
AVT Inc.
3
Supported eatures
Imaging Modes free-running, external trigger, fixed rate, software trigger
Fixed Rate Control 0.001 fps to maximum frame rate
External Trigger Delay 0 to 60 seconds in 1 microsecond increments
External Trigger Event rising edge, falling edge, any edge, level high, level low
Exposure Time 25 microseconds to 60 seconds in 1 microsecond increments
Gain 0 to 24dB
Region of Interest (ROI)
independent x and y control with 1 pixel resolution
Horizontal Binning 1 to 8 pixels
Vertical Binning 1 to 14 rows
Pixel Formats Mono8, Mono16*, Bayer8, Bayer 16
Sync Out Modes trigger ready, trigger input, exposing, readout, imaging, strobe, GPO
*On monochrome versions only.
GB2450 User Manual 70-0046A-A
AVT Inc. 4
Mechanical
69.92.75 19.10.75
1.78 45.2
16.50.6542.21.66
0.65 16.5
0.62 15.70.37 9.4
0.93 23.6
1.16 29.5
0.19 4.8
0.37 9.4
0.63 15.9
0.54 13.6
2 PLCS TYP
M2.5x0.45
0.062 1.6
0.19 4.9
3
0.10 2.50.17 4.3
0.13 3.2
6 PLCS TYP
0.10 2.6
2 PLCS TYP
0.75 19.1
21
31.21.23
1.80 45.7
2.00 50.8
INCHES[MILLIMETERS]
ITEM 1: 3M 10214-55G3PC
ITEM 2: HAL HFJ11-1G16E-L12RL
ITEM 3: S NY ICX625
PTI NS: LANDSCAPE/RIGHT ANGLE C NNECT RS
MODEL: GB2450/GB2450C
GB2450 User Manual 70-0046A-A
AVT Inc. 5
69.9
1.78 45.2
19.10.75
42.21.66 16.50.65
64.72.55
2.75
0.65 16.5
0.62 15.70.37 9.4
0.65 16.5
0.23 5.8
0.062 1.6
0.85 21.6
0.65 16.5
0.53 13.5
0.19 4.9
3
0.13 3.2
6 PLCS TYP
0.10 2.6
2 PLCS TYP
0.75 19.1
1
2
9.1
1.80 45.7
1.23 31.2
0.93 23.6
1.16 29.5
0.63 16
2 PLCS TYP
M2.5x0.45
0.36
2.00 50.8
INCHES[MILLIMETERS]
ITEM 1: 3M 10214-6212PC
ITEM 2: HAL HFJV1-E1G16-L12RL
ITEM 3: S NY ICX625
PTI NS: LANDSCAPE/VERTICAL C NNECT RS
MODEL: GB2450-V/GB2450C-V
GB2450 User Manual 70-0046A-A
AVT Inc. 6
INCHES[MILLIMETERS]*Nominal value. This dimension will vary
depending on CCD type.
ADJUSTABLE
C-M UNT
0.29 7.4
0.45 11.4
0.65 16.5
0.84 *21.3
1.50 38.1
1.28 32.5
GB2450 User Manual
70-0046A-A
AVT Inc.
7
Connections
1
2
3
4
Figure 1. GB SERIES connection diagram.
GB2450 User Manual
70-0046A-A
AVT Inc.
8
Item 1: GIGABIT ETHERNET PORT
This port conforms to the IEEE 802.3 1000BASE-T standard for Gigabit Ethernet over copper.
It is recommended that CAT5E or CAT6 compatible cabling and connectors be used for best
performance. Cable lengths up to 100m are supported.
Item 2: General Purpose I/O PORT
PIN 1PIN 7
PIN 8
PIN 14
PIN FUNCTION
1 12V POWER
2 GND POWER
3 Sync Input 1 - isolated
4 Isolated Ground
5 Sync Output 1 - isolated
6 Video Iris
7 DNC
8 12V POWER
9 GND POWER
10 RS-232 TXD
11 RS-232 RXD
12 Sync Input 2 – non-isolated
13 Sync Output 2 – non-isolated
Figure 2. General Purpose I/O Pin out. Camera
rear view. 14 GND SIGNAL
The General Purpose I/O port uses a 3M 10214-55G3PC (or 3M 10214-6212PC) connector on
the camera side. The mating cable connector is 3M 10114-3000PE with shielded housing 3M
10314-3210-00X (X indicates color preference). This connector can be purchased from Prosilica
or from http://www.digikey.com.
See Addendum for more detail.
DO NOT EXCEED 5.5V ON SIGNAL INPUTS UNLESS OTHERWISE
INDICATED. SYNC INPUT 1 CAN BE DRIVEN FROM A HIGHER VOLTAGE IF
A CURRENT LIMITING RESISTOR IS USED TO LIMIT THE CURRENT TO
LESS THAN 10 MILLIAMPS.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Cámara digital de Allied
