AJAX DoorProtect Plus Manual de usuario

DoorProtect Plus User Manual

Updated July 30, 2020

DoorProtect Plus is a wireless opening, shock, and tilt detector, that operates

within the Ajax security system, connecting via the protected radio

protocol. Is used inside premises. The communication range is up to 1,200 m line

of sight. DoorProtect Plus can operate up to 5 years from a pre-installed battery

and capable to detect more than one million openings.

The user can conﬁgure the detector via the for iOS, macOS, Windows, or

Android. The app notiﬁes the user of all events through push notiﬁcations, SMS,

and calls (if activated).

DoorProtect Plus does not support connecting via the or

integration modules.

Jeweller

Ajax app

Ajax uartBridge Ajax ocBridge Plus

The Ajax security system can be connected to a central monitoring station of a

security company.

Functional Elements

Buy opening detector with shock and tilt sensor DoorProtect Plus

1. DoorProtect Plus

2. Big magnet

3. Small magnet

4. LED indicator

5. SmartBracket attachment panel (perforated part triggers the tamper button in

case of any attempt to tear off the detector from the surface)

6. External detector connection socket

7. QR code

8. Device switch

9. Tamper button

Operating Principle

DoorProtect Plus consists of two parts: the detector and the constant magnet. The

detector is equipped with the sealed contact reed relay, built-in accelerometer, and

socket for a third-party wired detector.

Attach the detector to the door frame, while the magnet can be attached to the

moving wing or sliding part of the door. If the sealed contact reed relay is within the

coverage area of the magnetic ﬁeld, it closes the circuit, which means that the

detector is closed. The opening of the door pushes out the magnet from the sealed

contact reed relay and opens the circuit. In such a way, the detector recognizes the

opening.

The DoorProtect Plus set includes two constant magnets. The small one works at

a distance of 1 cm, and the big one — up to 2 cm.

The detector can be positioned horizontally. If there is no need to detect opening,

use only the detector part (without magnets) and disable the primary detector in

the settings.

The accelerometer detects shocks and vertical deviation relative to the initial

position of more than 5°. DoorProtect Plus can be installed on windows, including

dormer windows, and the system can be armed when they are slightly open

(disable the primary detector in the settings рreviously).

If triggered, DoorProtect Plus immediately transmits the alarm signal to the hub,

activating the sirens and notifying the user and security company.

Connecting

Before starting connection

Only users with administrator rights can add the device to the hub.

How to connect the detector to the hub

1. Following the hub user guide, install the . Create the account, add the

hub, and create at least one room.

Ajax app

2. Switch on the hub and check the internet connection (via Ethernet cable and/or

GSM network).

3. Make sure that the hub is disarmed and does not update by checking its status

in the Ajax app.

1. Select Add Device in the Ajax app.

2. Name the device, scan or type the QR code (located on the detector body and

packaging), and select the location room.

For detection and pairing to occur, the detector should be located within the

coverage area of the wireless network of the hub (at a single protected object). The

connection request is transmitted for a short time: at the moment of switching on

the device.

If the device failed to pair (LED blinks once per second), switch it off for 5 seconds

and retry. The detector connected to the hub appears in the list of devices in the

app. The update of the detector statuses in the list depends on the device ping

interval set in the hub settings (the default value is 36 seconds).

States

3. Tap Add — the countdown will start.

4. Switch on the device.

1. Devices

2. DoorProtect Plus

Parameter Value

Temperature

The temperature of the detector. The temperature

is measured on the processor and changes

gradually

Jeweller Signal Strength The signal strength between the hub and the

detector

Connection Connection status between the hub and the

detector

Battery Charge The battery level of the detector, displayed in

increments of 25%

Lid The tamper mode of the detector, which reacts to

the detachment of or damage of the body

Delay when entering, s

Entry delay (alarm activation delay) is the time

you have to disarm the security system after

entering the room

Delay when leaving, s

Delay time when exiting. Delay when exiting

(alarm activation delay) is the time you have to

exit the room after arming the security system

Routed Through ReX Displays the status of using the radio signal range

extender ReX

Primary Detector Indicates whether the opening sensor is active

Secondary detector Status of the external detector connected to

DoorProtect Plus

Always active Indicates whether the detector is always armed

Shock sensor Indicates whether the shock sensor is active

Tilt sensor Indicates whether the tilt sensor is active

Firmware The detector ﬁrmware version

Device ID Device identiﬁer

Settings

What is delay when entering

What is delay when leaving

1. Devices

2. DoorProtect Plus

3. Settings

Setting Value

First ﬁeld Detector name, can be edited

Room Selecting the virtual room to which the device is

assigned

Delay when entering, s

Selecting delay time when entering. Delay when

entering (alarm activation delay) is the time you

have to disarm the security system after entering

the room

Delay when leaving, s

Selecting the delay time when exiting. Delay when

exiting (alarm activation delay) is the time you

have to exit the room after arming the security

system

Delays in Night mode

Delay turned on when using Night mode

Arm in Night mode

If actived, the detector switches to armed state

while Night mode is active.

Kept in mind that in , all active

sensor of the detector become armed. It is not

possible to arm only certain sensors of the

detector in Night mode (for example, only a tilt

sensor)

Primary Detector If setting is active, the DoorProtect Plus primary

detector reacts to opening/closing

External contact enabled If setting is active, the detector registers external

detector alarms

Shock sensor If active, shock-sensor will detect alarm after

more than one impact

What is delay when entering

What is delay when leaving

What is night mode

Night mode

Sensitivity Sensitivity level of the shock sensor

Ignore simple impact If active, the detector ignores single hit

Tilt sensor If active, sensor will detect tilt

Tilt Selecting the normal angle of the sensor. Above

this limit, the sensor detects an alarm

Tilt alarm delay The number of seconds from the moment the

sensor is tilted to the alarm

Always active When turned on, the detector is always armed

External Contact Type Selecting the type of

Time before alarm, sec

(available for roller shutter motion detector only)

The time in seconds during which a given number

of impulses should be counted. This time is

counted after the ﬁrst impulse of the detector.

Impulses before alarm

(available for roller shutter motion detector only)

Number of detector impulses required to raise an

alarm

Alert with a siren if opening detected If active, and are

activated when opening detected

Alert with a siren if an external contact is open If active, HomeSiren and StreetSiren are activated

during an external detector alarm

Alert with a siren if shock is detected If active, HomeSiren and StreetSiren are activated

during a shock alarm

Alert with a siren if tilt is detected If active, HomeSiren and StreetSiren are activated

during a tilt alarm

Jeweller Signal Strength Test Switches the detector to the signal strength test

mode

Detection Zone Test Switches the detector to the detection area test

Attenuation test

Switches the detector to the signal fade test

mode (available in detectors with ﬁrmware

version 3.50 and later)

User Guide Opens the detector User Guide

Unpair Device Disconnects the detector from the hub and

deletes its settings

external wired

detector

HomeSiren StreetSiren

Otros manuales para DoorProtect Plus

Tabla de contenidos

Otros manuales de Sensor de seguridad de AJAX

AJAX

AJAX MotionProtect Plus Manual de usuario

AJAX

AJAX GlassProtect Manual de usuario

AJAX

AJAX FireProtect 2 Jeweller Manual de usuario

AJAX

AJAX ReX Manual de usuario

AJAX

AJAX DoorProtect Plus Manual de usuario

AJAX

AJAX MotionCam PhOD Jeweller Manual de usuario

AJAX

AJAX LeaksProtect Manual de usuario

AJAX

AJAX CombiProtect Manual de usuario

AJAX

AJAX LeaksProtect Manual de usuario

AJAX

AJAX GlassProtect Manual de usuario

AJAX

AJAX FireProtect 2 Jeweller Manual de usuario

AJAX

AJAX FireProtect 2 Heat/CO Jeweller Manual de usuario

AJAX

AJAX DoorProtect Plus Manual de usuario

AJAX

AJAX MotionProtect Manual de usuario

AJAX

AJAX MotionProtect Plus Fibra Manual de usuario

AJAX

AJAX MotionProtect Jeweller Manual de usuario

AJAX

AJAX GlassProtect Manual de usuario

AJAX

AJAX CombiProtect Fibra Manual de usuario

AJAX

AJAX MotionProtect Manual de usuario

AJAX

AJAX HomeSiren Manual de usuario

AJAX

AJAX MotionProtect Manual de usuario

AJAX

AJAX MotionProtect Curtain Manual de usuario

AJAX

AJAX MotionCam Fibra Manual de usuario

AJAX

AJAX GlassProtect Fibra Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario