AIPTEK Qt CAM FLASH Manual de usuario
@n IP Company
Qt CAM FLASH
Installation Guide
English
How to Use Your Camera
Introduction
Installing Batteries
The built-in memory of your camera is 64 Mbit memory. It supports two kinds
of resolution- high resolution ( 640x480 VGA) for 26 pictures and low
resolution ( 320x240 QVGA ) for 107 pictures. Besides, your camera offers
several functions on the LCD, showing the remaining number of pictures as
well. With a USB cable, you can transfer all the pictures to your PC.
Your camera is powered by 4 AAA batteries or by a PC via a USB cable.
The upper 2AAA batteries are for Flash Strobe. The lower 2 AAA batteries
are for your camera.
***Notes ***
When batteries are removed, all of the stored
pictures are cleared. ( Battery Capacity: continuous
snapshot for 2 hours, stand by works for
approximately1 week.)
English
..1..
View Finder
Lens
USB Port
Shutter Switch( )SW1
Mode Switch( )SW2
LCD Display
Battery Cover
Flash Strobe
Flash Dial
Strap
View Finder
Camera Front
Camera Back
..2..
Selecting functions
Your camera has two switches - the shutter switch(SW1) and the mode
switch ( Sw2 ). As you keep pressing the mode switch, the LCD indicates "
Hr, 26,Ct, St, CL, and Lr" icons in order. To select the icon you want, press
the shutter switch. Note! If an icon is not selected within 5 seconds, the
LCD goes back to the picture remaining number. The following chart shows
the function of each icon.
Taking a picture
Press the shutter switch to take a picture.
A high pitched beep indicates that a
picture is taken successfully and the
counter decreases as well. A low beep
indicates insufficient light to take a picture.
A series of beeps suggest that the camera
is full.
Switching the camera on / off
Keep pressing SW2 until the LCD is
activated, and the camera turns off after
30 seconds of inactivity. The LCD
indicates "Lr" for low resolution (QVGA
images) and "Hr" for high resolution(VGA
images). The LCD then displays the
number of the remaining pictures. To turn
off the camera, press SW2 for 2 seconds. Press Sw2
LCD
is activated
Press Sw1 to take a picture
English
..3..
Change mode to "Ct"
Continuous mode
Press the mode switch until "Ct" appears on the LCD. You can take a series
of pictures in quick succession by holding down the shutter switch. The
function stops as you release the shutter switch. If the "Ct" icon is not
selected within 5 seconds, the LCD reverts back to the remaining number of
the pictures .
Press SW2 to change features
Features are displayed
Press SW1 to select mode
Low resolution ( 107 images at most )
Picture remaining number
High resolution ( 26 images at most )
Continuous snapshot
Clear all images
10-second self-timer
SW1
"Ct" is displayed
Press SW1 to select Continuous mode
..4 ..
SW1
Self timer
Press the mode switch until "St" appears on the LCD. Then press the shutter
switch and a 10 second self-timer starts. Every 10 second the camera issues
a short beep. When completing the self-timer, a longer beep sounds, which
indicates that a picture is taken.
Note: The self-timer can't work when the memory of your camera is full.
Change mode to "St"
"St" is displayed
Press SW1 to initiate the self-timer mode
Clearing all the stored
Press the mode switch until CL appears on the LCD. Press SW1 and after a
beep the LCD starts to flash . Press SW1 again within 5 seconds and all
and the picture counter are cleared.
the
camera memory
Change mode to "CL"
"CL" is displayed
Press SW1 to select clear mode
LCD starts to flash
Press SW1 to clear the memory
English
..5..
Changing the picture resolution
Picture resolution may only be changed when the camera memory is empty.
If there are any pictures stored in your camera, the memory must be cleared
first. To change resolution, press the mode switch until the resolution icon is
displayed. To select "Hr" or " Lr", press SW1. Then the LCD shows the
number of remaining pictures at the current setting.
Change mode to "Hr" or "Lr"
"Hr" or "Lr" is displayed
Press SW1 to change resolution
The flash is turned on.
The flash is turned off.
On:
Off:
Warning : Avoid direct exposure to eyes.
Flash strobe
Flash Strobe Button: It's on the back of your camera. Green light appears
on the square when flash strobe is activated. To activate flash strobe, move
the flash dial up.
SW1
..6..
How to Download Photo and Video to PC
Thank you for purchasing the digital camera. This guide will help you install
your camera onto your computer system.
Digital Camera Manager Installation
Place the CD into your CD-ROM and click on the Digital Camera Manager
Icon to begin the intallation.If the CD does not automatically display, simply
go to "Start" then "Run" and select the path "D:\Setup.exe". You may need
to replace "D" with the letter that corresponds to your CD-ROM drive.
Now your computer is initializing the Wise Installation Wizard. Please wait.
English
Digital Camera Manager
..7..
After the welcome screen appears, click "Next".
The CD begins installing the driver to the proper location.
The dialog box that appears asks if you would like to restart your computer
now or later. Press "OK" to complete installation.
..8..
Start Digital Camera Manager
The digital pictures can be transferred at all times, even if you take only one
picture. To connect your camera with your PC, you need a USB cable and
USB port. Your camera double beeps when successfully connected with
your PC. Don't worry! All of the stored images in your camera are still alive.
Your PC offers power for your camera. When disconnecting the USB cable,
your camera turns off automatically.
Connect the smaller end of the USB
cable to the USB port of your
camera.
Plug the larger end of the
USB cable to the USB port of
your PC.
Note: When plugged into a USB port, your camera is powered by the
PC. You may remove the batteries. However, all pictures are cleared
when the USB cable is unplugged.
=
=
English
..9..
Tabla de contenidos
Otros manuales de Cámara digital de AIPTEK
AIPTEK
AIPTEK PenCam Mini 1.3 Guía
AIPTEK
AIPTEK Pencam VGA+ Manual de usuario
AIPTEK
AIPTEK POCKET CAM 8200 Manual de usuario
AIPTEK
AIPTEK POCKETCAM 5000 Manual de usuario
AIPTEK
AIPTEK Pencam VGA+ Manual de usuario
AIPTEK
AIPTEK DV T100 LE Manual de usuario
AIPTEK
AIPTEK Pocket DVII Manual de usuario
AIPTEK
AIPTEK PENCAM COMPACT Manual de usuario
AIPTEK
AIPTEK POCKETCAM 3M Guía
AIPTEK
AIPTEK PocketCam Smart 2Mega Manual de usuario
AIPTEK
AIPTEK SlimCam 4000 Manual de usuario
AIPTEK
AIPTEK PENCAM VGA Manual de usuario
AIPTEK
AIPTEK Pocket DV 5100M Manual de usuario
AIPTEK
AIPTEK POCKETCAM 8200 Manual de usuario
AIPTEK
AIPTEK SLIMCAM 4600 Manual de usuario
AIPTEK
AIPTEK PocketCam PocketCam Classic Manual de usuario
AIPTEK
AIPTEK PocketCam 4000 Manual de usuario
AIPTEK
AIPTEK PENCAM VOICE Manual de usuario
AIPTEK
AIPTEK POCKETCAM 5200 Manual de usuario
AIPTEK
AIPTEK PenCam Trio VGA Manual de usuario
