Agri Alert 9600 Manual de usuario

AGRI-ALERT 9600

ALARM SYSTEM

USER MANUAL

M 890-00279 rev. 14 K 895-00004 rev. 00

WARNINGS

The warranty can be void if this product is used in a manner not specified by the manufacturer.

Every effort has been made to ensure that this manual is complete, accurate and up-to-date. The information

contained in it is however subject to change without notice due to further developments.

Manufacturer:

Viatron Electronics

5200, Armand-Frappier

St-Hubert (Quebec)

Canada

J3Z 1G5

TABLE OF CONTENTS

SYSTEM OVERVIEW ................................................................................ 7

CHAPTER ONE: USER INTERFACE ............................................................ 9

1.1 FRONT PANEL ........................................................................................... 9

1.2 MEANING OF STATUS LEDS ..................................................................... 10

1.3 DISPLAYING A PARAMETER ...................................................................... 10

1.4 MODIFYING A PARAMETER ....................................................................... 11

1.5 HOW TO USE THE MENUS ........................................................................ 12

1.6 SYSTEM MESSAGES................................................................................. 14

1.7 BURGLAR ZONES..................................................................................... 15

1.8 ACKNOWLEDGING AN ALARM.................................................................. 16

1.9 TELEPHONE INTERFACE............................................................................ 17

CHAPTER TWO: SYSTEM INITIALIZATION .............................................. 21

2.1 POWER UP .............................................................................................. 21

2.2 SYSTEM CLOCK....................................................................................... 21

2.3 USER ID MESSAGE ................................................................................... 23

2.4 ZONE ID MESSAGE .................................................................................. 25

2.5 DELETING ALL ID MESSAGES.................................................................... 27

2.6 PASSWORD PROTECTION ......................................................................... 28

2.6.1 Modifying the Master Password ....................................................................................... 28

2.6.2 Enabling / Disabling the Password Feature .......................................................................... 30

2.6.3 Modifying the User Passwords ......................................................................................... 31

2.6.4 Erasing All User Passwords ............................................................................................. 32

2.7 TEMPERATURE UNITS .............................................................................. 33

2.8 POWER FAILURE ALARM .......................................................................... 34

2.9 TEST PROCEDURE.................................................................................... 35

4AA-9600.rev.14

CHAPTER THREE: COMMUNICATION PARAMETERS................................. 36

3.1 INTRODUCTION ....................................................................................... 36

3.2 DIALING INFORMATION............................................................................ 38

3.2.1 Busy Line Tries.............................................................................................................. 38

3.2.2 Message Repetitions ......................................................................................................38

3.2.3 Call Start Delay............................................................................................................. 38

3.2.4 Time Between Calls .......................................................................................................38

3.2.5 Restore Calls ................................................................................................................ 39

3.2.6 # of Call Repetitions....................................................................................................... 39

3.2.7 Alarm Recall Time ......................................................................................................... 39

3.2.8 Pause Delay Key ........................................................................................................... 39

3.3 PHONE SETTINGS .................................................................................... 40

3.3.1 Phone Numbers ..............................................................................................................40

3.3.1.1 Home .................................................................................................................... 41

3.3.1.2 Cellular.................................................................................................................. 41

3.3.1.3 Beeper .................................................................................................................. 42

3.3.1.4 Pager ....................................................................................................................42

3.3.1.5 Alarm Report .......................................................................................................... 45

3.3.1.6 Test Report ............................................................................................................45

3.3.2 Phone Groups ................................................................................................................ 47

3.3.2.1 Edit Group Label....................................................................................................... 48

3.3.2.2 Setting Day Phone Numbers ......................................................................................48

3.3.2.3 Setting Night Phone Numbers ....................................................................................49

3.3.2.4 Setting Weekend Phone Numbers ............................................................................... 51

3.3.2.5 Assigning Zones to Phone Groups ............................................................................... 52

3.3.2.6 Assigning System Alarms to a Phone Group ................................................................. 53

3.3.2.7 Deleting a Phone Group ............................................................................................ 53

3.3.3 Phone Starting Time ....................................................................................................... 54

3.4 ON SITE LISTENING.................................................................................. 55

3.5 RINGS / ANSWERING MACHINE................................................................. 57

CHAPTER FOUR: SPECIAL FUNCTIONS ................................................... 59

4.1 TROUBLE INFORMATION ........................................................................... 59

4.2 STANDBY MODE ..................................................................................... 60

4.3 PROGRAMMABLE OUTPUTS...................................................................... 61

4.3.1 Switched Outputs on the Agri-Alert 9600 ..........................................................................61

4.3.2 0-10V Output on the Agri-Alert 9600 ............................................................................... 63

4.3.3 Switched Outputs on Other Devices.................................................................................. 63

AA-9600.rev.14

CHAPTER FIVE : ALARM MANAGEMENT.................................................. 66

5.1 ALARM VALIDATION: SUMMARY OF EVENTS............................................ 66

5.2 SYSTEM ALARMS .................................................................................... 67

5.3 OUTDOOR TEMPERATURE COMPENSATION ON TEMPERATURE ALARMS ...... 68

5.3.1 To Activate / Deactivate the Outdoor Temperature Compensation:.......................................... 70

5.3.2 To Set the Offset Temperature: ....................................................................................... 71

5.4 ALARM MEMORY ..................................................................................... 72

5.5 ZONE STATUS DISPLAY ........................................................................... 73

5.5.1 Adjusting Set Points....................................................................................................... 75

5.5.2 Adjusting Curve Offset Values ......................................................................................... 77

5.5.3 Adjusting Curve Points .................................................................................................... 78

5.5.4 Enabling / Disabling Temperature Curve ............................................................................. 79

5.5.5 Adjusting the Recognition Time ........................................................................................ 80

5.5.6 Copying Zone Set Points to Another Zone .......................................................................... 80

5.5.7 Resetting Minimum / Maximum Values ............................................................................... 81

5.6 PARTITIONS ............................................................................................ 82

5.6.1 Adding a zone ............................................................................................................... 83

5.6.2 Deleting a zone ............................................................................................................. 83

5.6.3 Deleting a partition ........................................................................................................ 84

5.7 BYPASS / ACTIVATE FUNCTION ................................................................ 85

5.7.1 Changing Zone Status .................................................................................................... 85

5.7.2 Changing Partition Status................................................................................................ 86

5.7.3 Viewing Bypassed Zones.................................................................................................. 86

5.8 ENTRY DELAY ......................................................................................... 87

5.9 EXIT DELAY ............................................................................................ 88

5.10 SIREN PARAMETERS............................................................................... 89

5.10.1 Siren Delay.................................................................................................................. 89

5.10.2 Siren Time On ............................................................................................................. 90

TROUBLESHOOTING GUIDE .................................................................... 91

APPENDIX A: MAXIMUM WIRE LENGTHS................................................ 93

APPENDIX B: BACKUP BATTERY LIFE SPAN............................................ 94

APPENDIX C: EVENT CODES.................................................................. 95

GLOSSARY OF TERMS ..........................................................................102

WIRING DIAGRAMS ..............................................................................104

TECHNICAL SPECIFICATIONS ................................................................106

REGISTRATION CARD ...........................................................................107

6AA-9600.rev.14

NOTICE

Every effort has been made to ensure that this manual is complete, accurate and up-to-date. The information

contained in it is subject to change without notice due to further developments.

LIST OF TABLES AND FIGURES

Figure 1: Calling a Pager Number ............................................................................. 44

Figure 2: Outdoor Temperature Compensation ............................................................ 68

Figure 3: Critical Temperature Monitoring .................................................................. 69

Figure 4: Monitoring the Indoor-Outdoor Temperature Difference ................................... 69

Figure 5: Temperature Input Without Temperature Curve ............................................. 76

Figure 6: Temperature Input with Temperature Curve .................................................. 77

Figure 7: Example of Partitioning .............................................................................. 82

Table 1: Pager Codes Used by the Agri-Alert System .................................................. 43

Table 2: System Alarms ........................................................................................ 67

AA-9600.rev.14

SYSTEM OVERVIEW

The Agri-Alert system is a complete alarm detection and management system for

agricultural applications. It can handle up to 96 alarm inputs spread over several

buildings. The following diagram shows how the different components are connected

together.

Figure 1: AA9600 Installation Layout

BRIDGE-A

TO TEMPERATURE

CONTROLLER

NETWORK

8AA-9600.rev.14

DEVICE DESCRIPTIONS

The complete system can include up to 99 devices.

AA9600: the main system with 8 basic zones, two relays and one microphone. Two

extension cards can be added allowing 16 additional zones.

TP-800: a remote extension device that adds 8 zones and a programmable output to

the main system.

KP-400: a keypad for displaying system data from a remote location. Includes 4 dry

contact, burglar or temperature zones and one programmable output.

KPB-400: a dust- and moisture-tight keypad for displaying system data from a remote

location. Includes 4 dry contact, burglar or temperature zones and one programmable

output.

LB-9600: a device containing 96 LEDs for indicating zone status.

BRIDGE: a computer communication device. Allows the user to operate the complete

system from a computer keyboard or modem. Datalogs up to 4 Agri-Alert systems (4

X 96 zones). When used with a Combridge-1 card, the Bridge is compatible with

AgBus, allowing the Agri-Alert to fetch temperature readings from existing controller

networks (see installer manual, sec. 3.4.3).

WARNING

Caution. Carefully read the following text for it contains important infor-

mation which, if ignored, may cause the controller to operate improperly.

Pay attention. The following text contains very useful information.

KEYS TO SYMBOLS IN THE MANUAL

AA-9600.rev.14

CHAPTER ONE: USER INTERFACE

The system displays and prompts for information by using the alphanumeric screen.

The keypad is used for data entry and for enabling and disabling the various system

functions. The speaker on the front panel delivers voice messages. A built-in piezo-

electric warns of illegal entries (3 short beeps) and beeps once when a valid key is

pressed. The integrated microphone on the front panel is used to record the user ID

message and provide on-site listening. The status of some subsystems is displayed

using LEDs on the front panel.

1.1 FRONT PANEL

1 - Display Screen — An alphanumeric display used to provide information and

prompt for inputs.

2 - Cursor Keys — Used to step through menu items during data entry and for delet-

ing the last character entered.

3 - Speaker — System identification and alarm messages.

4 - Integrated Microphone — Records the ID message and provides on-site listening

input.

5 - Keypad — User inputs and information requests.

6 - System LEDs — Status of various subsystems (see table on following page).

3 5

10 AA-9600.rev.14

1.2 MEANING OF STATUS LEDS

1.3 DISPLAYING A PARAMETER

When you select a parameter to input or modify, the system begins by displaying the

current value or status of the parameter. If the message to display is longer than the

size of the window, it will be scrolled to the left. The display pauses at the end of

each screen to allow time to read the message. You can exit prematurely from a

display sequence at any time by pressing the Cancel key. This will place you in

program mode and allow you to modify the parameter values (see next section). To

exit from this function as well, press the Cancel key once again.

DELGNINAEM

MRALA

erasnoitidnocmralaeromroenonehwdetavitcasiDELsihT

sadegdelwonkcasimralaehtnehwffodenrutsiDELehT.detceted

sahemittesereht,stsixeregnolonnoitidnocmralaehtsagnol

.evitcaerasmralarehtoondnadespale

YBDNATS

.edomybdnatsnisimetsystrelA-irgAehtnehwdetavitcasiDELsihT

mralarofstupnirosnesehtgnirotinomspotsmetsyseht,edomsihtn

signirotinomlamronnehwffodenrutsiDELehT.snoitidnoc

.demuser

SSAPYB ehT.dessapyberasenozeromroenonehwdetavitcasiDELsihT

.dessapybyltnerrucerasenozonnehwffodenrutsiDEL

DEMRA .demraerasenozralgrubehtnehwdetavitcasiDELsihT

ENILNO .enilenohpeletehtsesumetsysehtnehwdetavitcasiDELsihT

CAV61

ERULIAF

CAV61ehtnodetcetedsieruliafrewopanehwdetavitcasiDELehT

.tiucricylppus

WOL

YRETTAB .wolsiegatlovyrettabpu-kcabehtnehwdetavitcasiDELsihT

ELBUORT

:nehwdetavitcasiDELsihT

ehtmorfdeviecerlangisehthtiwstcilfnocnoitarugifnocenoza-

rosnes

yrdroerutarepmetanodetcetedsitiucricneporotrohseriwa-

.tupniRLOEhtiwtcatnoc

.RLOEDhtiwtupnitcatnocyrdanodetcetedsitiucricnepona-

.RLOEDhtiwtupnitcatnocyrdanodetcetedsitrohseriwa-

.tupniAm02-4anodetcetedsitrohsronepoeriwa-

.detcetedsimelborperawtfosa-

detcetedsierawtfoss'eludomehtnomelborpa-

rewopBSwoleludoma-

.eludomanoderuccomelborpnoitacinummoca-

Otros manuales para 9600

Tabla de contenidos

Otros manuales de Sistema de seguridad de Agri Alert

Agri Alert

Agri Alert 800 Manual de usuario

Agri Alert

Agri Alert 9600 Manual de usuario

Agri Alert

Agri Alert TP-800 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario