AGPtek BA02 Manual de usuario

User Manual

English 01-10 | Italiano 11-21

Product Overview

TX: Transmitter | RX: Receiver

1. Power Button/Confirm: Long press for 3

seconds to turn on and off; Short press to

confirm.

2. TX/RX Switch; Search: Long press for 5

seconds to switch TX/RX mode; Short press

Type-C

Port

TX/RX Switch; Search

Power Button/Confirm

AUX Plug

Up/

Volume -

Down/

Volume +

to search for connected devices.

3. Up/Volume -: Long press 5 seconds to turn

down the volume; Short press to scroll up.

4. Down/Volume +: Long press 5 seconds to

turn up the volume; Short press to scroll

down.

5. AUX Plug: Inserted into PC, TV, game

console (Switch, PS4).

6. Type-C Port: Used as a charging port or

audio port. When the device is with built-in

sound card, it support using Type-C data

cable to connect and transmit audio.

Note: When used as a transmitter, please

adjust your Bluetooth headset or speaker to

adjust the volume.

TX Mode Operation Guide

When this adapter is in transmit mode, it can

be used with non-Bluetooth devices to

transmit the sound to the Bluetooth devices

like Bluetooth headset or Bluetooth speaker.

How To Use

Game Console

Headset

Speaker





Search devices

Pairing status

Note: There are two input modes: AUX and

Type-C.

Dual Pairing

Two Bluetooth receiving devices can be

connected at the same time.

After completing the connection to the first

Bluetooth device as the above method,

connect to the second one in the same way.



Finish pairing

Then, two Bluetooth headsets or Bluetooth

speakers can work simultaneously.

RX Mode Operation Guide

When this adapter is in receiving mode, it can

transmit the music from mobile phones,

tablets, notebooks, etc., to non-Bluetooth

speakers with AUX audio input through the

Bluetooth receiving function of this adapter.

How To Use

Non-Bluetooth

Speaker

Smartphone

Tablet

Notebook







Finish pairing

Switch to RX and

Search devices

Insert and

power on

Dual Pairing

The adapter can receive signals from two

Bluetooth transmitting devices (mobile phones,

tablets or notebooks) at the same time.

The connection steps are the same as above.

Note: It just allow to support pairing with two

transmitting audio devices at the same time,

that is, listen to two devices alternately in

receiving mode.

Restore Factory Settings & Clear Bluetooth

Pairing List

After shutting down, long press the power

button and hold it on for about 10 seconds

until the prompt of restoring factory settings

appears.

Charging

When the adapter is in low power or can’t

power on, you can charge it via the Type-C

port.

Trouble Shooting

When you encounter the following problems,

you can try the following methods to solve:

1. The adapter is not working properly ?

1) Please connect this product to a power

adapter to charge, and check whether the

battery is out of electricity.

2) The device has been connected to the

adapter but there is no sound. Please check

whether the volume of the adapter is 0.

3) The mobile phone cannot search for or pair

with the adapter. Please check whether the

adapter is in the RX receiving mode. You can

refer to the above RX mode operation

guide.

4) The Bluetooth device (Bluetooth headset or

speaker) cannot be searched when the

adapter is in TX mode. Please check

whether the adapter is in searching for the

Bluetooth device status in TX mode. You can

refer to the above TX mode operation

guide.

2. What should I do if there is no sound when

two audio devices are connected at the

same time in TX mode ?

1) First, make sure that the two audio devices

have been paired with the adapter.

2) It is necessary to confirm whether the

volume of the audio device is automatically

reduced to the lowest level or whether it

automatically stops playing music. At this

time, it is necessary to let the audio device

to play music or increase the volume. Note:

When the Bluetooth headsets or speakers

stop playing, it may appear that the music

of the audio output device is still playing.

After the playback is resumed, the music

can continue to play.

3) You can connect the two devices again after

restarting the Bluetooth adapter.

3. Why can't I search for Bluetooth headsets or

Bluetooth speakers in TX transmit mode ?

The device may not be compatible with the

Bluetooth adapter. For example, Sony's

WF-1000XM3 is unable to be searched.

Tabla de contenidos

Idiomas:

Otros manuales de Reproductor de MP3 de AGPtek

Manuales populares de Reproductor de MP3 de otras marcas

Blaupunkt

Blaupunkt Compact Drive MP3 Manual de usuario

Memorex

Memorex MMP9008 - 8GB USB 2.0 Manual de usuario

Meizu Electronic Technology

Meizu Electronic Technology E5 Manual de usuario

Naxa

Naxa NMV-173NX Manual de usuario

Philips

Philips PSA250 Manual de usuario

Zipy

Zipy go! Waving Manual de usuario

Sylvania

Sylvania SMPK4068 Manual de usuario

Sony

Sony NW-MS7 - Memory Stick Walkman Manual de usuario

Irradio

Irradio RF-42UC Manual de usuario

NABAIJI

NABAIJI SWIM MUSIC 100 Manual de usuario

Laser

Laser MP3-A9-4GB Manual de usuario

Samsung

Samsung YP-T7F Manual de usuario

Savant

Savant SMS-1001-00 Guía de referencia rápida

Trevi

Trevi XP 71 BT Manual de usuario

MobiBlu

MobiBlu DAH-1500i Manual de usuario

Denver

Denver MPS-201 Manual de usuario

Steren

Steren MP3-002 Manual de usuario

Kenwood

Kenwood M1GD50 Manual de usuario