Agilent Technologies HS-2 Manual de usuario
DRAFT
Vacuum Products Division
HS-2 Diffusion Pump
Part No. 699901150
Rev. G
December 2013
DRAFT
Copyright 2013
Agilent, Inc.
HS-2 Diffusion Pump
Santovac®5 Diffusion Pump Fluid of SANTOVAC FLUIDS, INC.
Viton®is a registered trademark of E. I du Pont de Nemours and Company.
HS-2 Diffusion Pump
DRAFT
iii
Warranty
Products manufactured by Seller are warranted against defects in materials and workmanship for twelve
(12) months from date of shipment thereof to Customer, and Seller’s liability under valid warranty
claims is limited, at the option of Seller, to repair, replacement, or refund an equitable portion of the
purchase price of the Product. Items expendable in normal use are not covered by this warranty. All
warranty replacement or repair of parts shall be limited to equipment malfunctions which, in the sole
opinion of Seller, are due or traceable to defects in original materials or workmanship. All obligations of
Seller under this warranty shall cease in the event of abuse, accident, alteration, misuse, or neglect of
the equipment. In-warranty repaired or replaced parts are warranted only for the remaining unexpired
portion of the original warranty period applicable to the repaired or replaced parts. After expiration of
the applicable warranty period, Customer shall be charged at the then current prices for parts, labor,
and transportation.
When products are used with toxic chemicals, or in an atmosphere that is dangerous to the health of
humans, or is environmentally unsafe, it will be the responsibility of the Customer to have the product
cleaned by an independent agency skilled and approved in handling and cleaning contaminated
materials before the product will be accepted by Agilent, Inc. for repair and/or replacement.
Reasonable care must be used to avoid hazards. Seller expressly disclaims responsibility for loss or
damage caused by use of its Products other than in accordance with proper operating procedures.
Except as stated herein, Seller makes no warranty, express or implied (either in fact or by operation of
law), statutory or otherwise; and, except as stated herein, Seller shall have no liability under any
warranty, express or implied (either in fact or by operation of law), statutory or otherwise. Statements
made by any person, including representatives of Seller, which are inconsistent or in conflict with the
terms of this warranty shall not be binding upon Seller unless reduced to writing and approved by an
officer of Seller.
Disclaimer
Operation and maintenance of this equipment involves serious risk. It is the responsibility of the user to
maintain safe operating conditions at all times. Agilent assumes no liability for personal injury or
damage resulting from operation or service of the equipment.
Agilent has no control over the use of this equipment and is not responsible for personal injury or
damage resulting from its use. The safe use and disposal of hazardous or potentially hazardous
materials of any kind is the sole responsibility of the user. Observe all WARNINGS and CAUTIONS to
minimize the serious hazards involved.
It is the sole responsibility of the users of Agilent equipment to comply with all local, state and federal
safety requirements (laws and regulations) applicable to their system. Employ the services of an
industrial hygienist and/or a qualified chemical safety engineer in order to ensure safe installation and
use.
HS-2 Diffusion Pump
iv
DRAFT
Warranty Replacement and Adjustment
All claims under warranty must be made promptly after occurrence of circumstances giving rise thereto,
and must be received within the applicable warranty period by Seller or its authorized representative.
Such claims should include the Product serial number, the date of shipment, and a full description of
the circumstances giving rise to the claim. Before any Products are returned for repair and/or
adjustment, written authorization from Seller or its authorized representative for the return and
instructions as to how and where these Products should be returned must be obtained. Any Product
returned to Seller for examination shall be prepaid via the means of transportation indicated as
acceptable by Seller. Seller reserves the right to reject any warranty claim not promptly reported and
any warranty claim on any item that has been altered or has been returned by non-acceptable means of
transportation. When any Product is returned for examination and inspection, or for any other reason,
Customer shall be responsible for all damage resulting from improper packing or handling, and for loss
in transit, notwithstanding any defect or non-conformity in the Product. In all cases, Seller has the sole
responsibility for determining the cause and nature of failure, and Seller’s determination with regard
thereto shall be final.
If it is found that Seller’s Product has been returned without cause and is still serviceable, Customer will
be notified and the Product returned at its expense; in addition, a charge for testing and examination
may be made on Products so returned.
3/1/00
HS-2 Diffusion Pump
DRAFT
v
Contents
Documentation Conventions ....................................................................................................... xi
Diffusion Pump Hazards .............................................................................................................. xi
Installation, Maintenance and Specifications ............................................................................ 1-1
Installation .................................................................................................................................. 1-1
Pump Fluid Installation .........................................................................................................1-2
Maintenance............................................................................................................................... 1-3
Changing Heater Element...................................................................................................... 1-3
Cleaning ............................................................................................................................... 1-3
HS-2 Diffusion Pump Specifications............................................................................................ 1-4
Operating Specifications ....................................................................................................... 1-7
PHYSICAL SPECIFICATIONS................................................................................................. 1-8
Optional Components................................................................................................................. 1-9
Replaceable Parts...................................................................................................................... 1-10
HS-2 Diffusion Pump
This page intentionally left blank.
DRAFT
HS-2 Diffusion Pump
DRAFT
vii
Figures
1-1 Cold Cap Installation ........................................................................................................... 1-2
1-2 HS-2 Speed Curve................................................................................................................ 1-4
1-3 HS-2 Cross Section .............................................................................................................. 1-5
1-4 HS-2 Flange and Pump ........................................................................................................ 1-6
HS-2 Diffusion Pump
This page intentionally left blank.
DRAFT
HS-2 Diffusion Pump
DRAFT
ix
List of Tables
1 General Hazards................................................................................................................... xii
2 Explosive Conditions.............................................................................................................xiv
3 Pressurization Hazards...........................................................................................................xv
1-1 Operating Specifications ...................................................................................................... 1-7
1-2 Physical Specifications......................................................................................................... 1-8
1-3 Optional Components..........................................................................................................1-9
1-4 Replacement Parts ............................................................................................................. 1-10
1-5 Cold Cap Replacement Parts.............................................................................................. 1-11
HS-2 Diffusion Pump
This page intentionally left blank.
DRAFT
Otros manuales para HS-2
1
Tabla de contenidos
Otros manuales de Bomba de agua de Agilent Technologies
Agilent Technologies
Agilent Technologies 8698928 Manual de usuario
Agilent Technologies
Agilent Technologies 1200 series Manual de usuario
Agilent Technologies
Agilent Technologies TriScroll 610 Manual de usuario
Agilent Technologies
Agilent Technologies SH-110 Manual de usuario
Agilent Technologies
Agilent Technologies TPS-mini 9699180 Manual de usuario
Agilent Technologies
Agilent Technologies TPS-compact X3580-64000 Manual de usuario
Agilent Technologies
Agilent Technologies IDP-7 Manual de usuario
Agilent Technologies
Agilent Technologies IDP-15 Manual de usuario
Agilent Technologies
Agilent Technologies TriScroll 620 INV Series Manual de usuario
Agilent Technologies
Agilent Technologies 1260 Infinity Quaternary LC VL Manual de usuario
Agilent Technologies
Agilent Technologies Varian TriScroll 620 Series Manual de usuario
Agilent Technologies
Agilent Technologies IDP-3 Manual de usuario
Agilent Technologies
Agilent Technologies IDP-7 Manual de usuario
Agilent Technologies
Agilent Technologies 1260 Infinity Manual de usuario
Agilent Technologies
Agilent Technologies Infinity II SFC Binary 1260 Manual de usuario
Agilent Technologies
Agilent Technologies Turbo-V 2K-G Manual de usuario
Agilent Technologies
Agilent Technologies HS452 Manual de usuario
Agilent Technologies
Agilent Technologies IDP 10 Manual de usuario
Agilent Technologies
Agilent Technologies X3500-64000 Manual de usuario
Agilent Technologies
Agilent Technologies 1290 Infinity II Manual de instrucciones
Manuales populares de Bomba de agua de otras marcas
Sykes AmeriPumps
Sykes AmeriPumps GP100M Guía de solución de problemas
DUROMAX
DUROMAX XP WX Series Manual de usuario
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Manual de usuario
Franklin Electric
Franklin Electric IPS Manual de usuario
Xylem
Xylem e-1532 Series Manual de usuario
Milton Roy
Milton Roy PRIMEROYAL Manual de usuario