Agilent Technologies N5161A Manual de usuario

Agilent Technologies

N5161A/62A/81A/82A/83A

MXG Signal Generators

Installation Guide

Notice: This document contains references to

Agilent. Please note that Agilent’s Test and

Measurement business has become Keysight

Technologies. For more information, go to

www.keysight.com.

Installation Guide

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from Agi-

lent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

N5180-90002

Edition

June 2015

Printed in USA

Keysight Technologies, Inc.

3501 Stevens Creek Blvd.

Santa Clara, CA 95052 USA

Warranty

The material contained in this doc-

ument is provided “as is,” and is

subject to being changed, without

notice, in future editions. Further,

to the maximum extent permitted

by applicable law, Agilent disclaims

all warranties, either express or

implied, with regard to this manual

and any information contained

herein, including but not limited to

the implied warranties of mer-

chantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or

performance of this document or of

any information contained herein.

Should Agilent and the user have a

separate written agreement with

warranty terms covering the mate-

rial in this document that conflict

with these terms, the warranty

terms in the separate agreement

shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user

customers. Agilent provides this custom-

ary commercial license in Software and

technical data pursuant to FAR 12.211

(Technical Data) and 12.212 (Computer

Software) and, for the Department of

Defense, DFARS 252.227-7015 (Techni-

cal Data - Commercial Items) and DFARS

227.7202-3 (Rights in Commercial Com-

puter Software or Computer Software

Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in damage to the product or loss

of important data. Do not proceed

beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice,

or the like that, if not correctly

performed or adhered to, could

result in personal injury or

death. Do not proceed beyond a

WARNING notice until the

indicated conditions are fully

understood and met.

Contents

Agilent N5161A/62A/81A/82A/83A MXG Signal Generators Installation Guide v

1 Safety Information

Warnings, Cautions, and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

General Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Instrument Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

2 Getting Started

Checking the Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Signal Generator Physical Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Meeting Environmental and Electrical Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Line Setting Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Connecting the AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Configuring the MXG ATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Accessing the MXG (ATE) Web-Enabled Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Modifying the Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Configuring the Display (N5181A/82A/83A Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Configuring for Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

LAN Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

GPIB Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Ordering Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Proper Use and Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Cleaning Suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Returning a Signal Generator to Agilent Technologies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Contacting Agilent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

3 Operation Verification

Running Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Self Test Failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Frequency Range and Accuracy Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Frequency Counter Procedure (N5161A/62A1/81A/82A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Spectrum Analyzer Procedure (N5161A/62A1/81A/82A/83A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Troubleshooting Problems with the Frequency Accuracy Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Checking the Output Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

N5161A/81A Test Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

N5162A/82A Test Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

N5183A Test Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Troubleshooting Problems with the Output Power Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Contents

Agilent N5161A/62A/81A/82A/83A MXG Signal Generators Installation Guidevi

4 Regulatory Information

Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Assistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Agilent N5161A/62A/81A/82A/83A MXG Signal Generators Installation Guide vii

Documentation Overview

Installation Guide •Safety Information

•Receiving the Instrument

•Environmental & Electrical Requirements

•Basic Setup

•Accessories

•Operation Verification

•Regulatory Information

User’s Guide •Signal Generator Overview

•Setting Preferences & Enabling Options

•Basic Operation

•Optimizing Performance

•Using Analog Modulation (Option UNT Only)

•Using Pulse Modulation (Option UNU Only)

•Basic Digital Operation - No BBG Option Installed

•Basic Digital Operation (Option 651/652/654)

•Adding Real-Time Noise to a Signal (Option 403)

•Real-Time Phase Noise Impairments (Option 432)

•Custom Digital Modulation (Option 431)

•Multitone and Two-Tone Waveform Generator (Option 430)

•Working in a Secure Environment

•Troubleshooting

Programming Guide •Getting Started with Remote Operation

•Using IO Interfaces

•Programming Examples

•Programming the Status Register System

•Creating and Downloading Files

•Creating and Downloading User-Data Files

viii Agilent N5161A/62A/81A/82A/83A MXG Signal Generators Installation Guide

SCPI Reference •SCPI Basics

•Basic Function Commands

•LXI System Commands

•System Commands

•Analog Modulation Commands

•Arb Commands

•Real-Time Commands

•N5161A/62A/81A/82A SCPI Command Compatibility

•N5183A SCPI Command Compatibility

Service Guide •Troubleshooting

•Replaceable Parts

•Assembly Replacement

•Post-Repair Procedures

•Safety and Regulatory Information

•Instrument History

Key Helpa•Key function description

•Related SCPI commands

aPress the Help hardkey, and then the key for which you wish help.

Agilent N5161A/62A/81A/82A/83A MXG Signal Generators Installation Guide 1

1Safety Information

•Warnings, Cautions, and Notes on page 1

•General Safety Considerations on page 1

•Instrument Markings on page 2

Warnings, Cautions, and Notes

The documentation for this product uses the following safety notations. Familiarize yourself with each notation and its

meaning before operating the signal generator.

WARNING Warning denotes a hazard. It calls attention to a condition or situation that could result in personal

injury or loss of life. Do not proceed beyond a warning until you fully understand the indicated

conditions or situations.

CAUTION Caution calls attention to a condition or situation that could result in damage to or destruction of the

signal generator, or in the loss of a user’s settings or data. Do not proceed beyond a caution until you fully

understand the indicated conditions.

NOTE Note calls the user’s attention to an important point or special information in the text.

General Safety Considerations

WARNING If the signal generator is not used as specified, the protection provided by the equipment could be

impaired. The signal generator must be used in a normal condition only, in which all means for

protection are intact.

WARNING Personal injury may result if the signal generator covers are removed. There are no operator

serviceable parts inside. To avoid electrical shock, refer servicing to qualified personnel.

2 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators Installation Guide

Safety Information

Instrument Markings

The signal generator has the following markings. Familiarize yourself with each marking and its meaning before

operating the signal generator.

The instruction manual symbol. The product is marked with this symbol when it is necessary for

you to refer to instructions in the manual.

The CE mark is a registered trademark of the European Community. If this symbol is

accompanied by a year, it is the year when the design was proven.

The CSA mark is a registered trademark of the Canadian Standards Association International.

The C-Tick Mark is a trademark registered to the Australian Spectrum Management Agency.

This indicates compliance with all Australian EMC regulatory information.

This is the symbol of an Industrial Scientific and Medical Group 1 Class A Product. (CISPER

11, Clause 4)

This symbol marks the on position of the power line switch.

This symbol marks the standby position of the power line switch.

This symbol indicates that the input power required is AC.

This symbol indicates conformance to the standard specificationsa.

a.LXI Class B Compliance testing using IEEE 1588-2008 not available at release.

ICES/NMB-001 This is a marking to indicate product compliance with the Canadian Interference-Causing

Equipment Standard (ICES-001)

This equipment is Class A suitable for professional use and is for use in electromagnetic

environments outside of the home.

This symbol indicates separate collection for electrical and electronic equipment, mandated

under EU law as of August 13, 2005. All electric and electronic equipment are required to be

separated from normal waste for disposal (Reference WEEE Directive, 2002/96/EC).

Agilent N5161A/62A/81A/82A/83A MXG Signal Generators Installation Guide 3

2Getting Started

CAUTION To avoid damaging or degrading the performance of the MXG, do not exceed 33 dBm (2W) maximum of

reverse power levels at the RF input. See also Tips for Preventing Signal Generator Damage on

www.agilent.com.

NOTE Software Updates

Is your product software up-to-date? Periodically, Agilent releases software updates to fix known defects and

incorporate product enhancements. To search for software updates for your product, go to the Agilent

Technical Support website at www.agilent.com/find/TechSupport.

NOTE For the N5161A/62A, the softkey menus and features mentioned in this chapter are only available through the

Web-Enabled MXG or through SCPI commands. Refer to “Accessing the MXG (ATE) Web-Enabled Page” on

page 8 and to the SCPI Command Reference.

The MXG ATE blank front panel models, N5161A and N5162A signal generators, are part of the MXG

instrument family and unless otherwise indicated, all references to the MXG are inclusive of the MXG ATE

instruments.

Full LXI–B feature implementation is only available on instruments with firmware >A.01.50. A license may

be required to enable this feature and to download firmware versions >A.01.50. For information on new

firmware releases, go to http://www.agilent.com/find/upgradeassistant.

•Checking the Shipment on page 4

•Signal Generator Physical Characteristics on page 4

•Meeting Environmental and Electrical Requirements on page 5

•Configuring the MXG ATE on page 7

•Configuring the Display (N5181A/82A/83A Only) on page 11

•Configuring for Remote Control on page 12

•Ordering Accessories on page 14

•Proper Use and Cleaning on page 16

•Returning a Signal Generator to Agilent Technologies on page 16

•Contacting Agilent on page 16

4 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators Installation Guide

Getting Started

Checking the Shipment

1. Inspect the shipping container for damage.

Signs of damage can include a dented or torn shipping container or cushioning material that indicates signs of

unusual stress or compacting.

2. Carefully remove the contents from the shipping container and verify that your order is complete.

The following items are included with each signal generator:

• Installation Guide

• documentation CD-ROM (CD-ROM contents are also available in hardcopy format)

• three-prong AC power cord specific to geographic location

3. Verify that the options you ordered are included with the shipment by checking the serial number label on the rear of

the signal generator and the packing literature included with the shipment.

4. The N5183A signal generator is shipped with the adapter options as shown in the following table.

See also, “Ordering Accessories” on page 14.

Signal Generator Physical Characteristics

• Height: 10.16 cm (4 in)

• Width: 42.55 cm (16.75 in)

• Depth: 48.90 cm (19.25 in)

• Weight (N5161A): 10.66 kg (23.5 lb)

• Weight (N5162A): 12.47 kg (27.5 lb)

• Weight (N5181A): 10.66 kg (23.5 lb)

• Weight (N5182A): 12.47 kg (27.5 lb)

• Weight (N5183A): 13.8 kg (30.0 lb)

Table 2-1 Adapters Shipped by Option

Option Description Quantity Part Number

520 Standard adapter, 3.5 mm (f) - 3.5 mm (f) 1 5061-5311

520 with 1ED Standard adapter, type-N (m) - 3.5 mm (f) 1 1250-1744

532/540 Standard adapter set

Adapter-coaxial straight 2.92 mm jack 2.40 mm

jack 50 ohm 40 GHz 1 1250-3782

2.4 mm (f) - 2.92 mm (f) 1 33311-82005

Otros manuales para N5161A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Generador portátil de Agilent Technologies

Agilent Technologies

Agilent Technologies ESG-D Series Guía de inicio rápido

Agilent Technologies

Agilent Technologies 81110A Manual de usuario

Agilent Technologies

Agilent Technologies 85901A Manual de operación

Agilent Technologies

Agilent Technologies HP 83711A Manual de usuario

Agilent Technologies

Agilent Technologies HP 81130A Manual de usuario

Agilent Technologies

Agilent Technologies E4423B Guía de inicio rápido

Agilent Technologies

Agilent Technologies 75000 Series C Manual de usuario

Agilent Technologies

Agilent Technologies 33210A Manual de usuario

Agilent Technologies

Agilent Technologies 8360B Manual de usuario

Agilent Technologies

Agilent Technologies E4438C Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies n5181a Manual de instalación

Agilent Technologies

Agilent Technologies E8257C Manual de usuario

Agilent Technologies

Agilent Technologies E4438C Manual de instalación y operación

Agilent Technologies

Agilent Technologies E8267C Manual de usuario

Agilent Technologies

Agilent Technologies ESG series Manual de usuario

Agilent Technologies

Agilent Technologies E8663B Manual de usuario

Agilent Technologies

Agilent Technologies E4438CK-601 Manual de instalación y operación

Agilent Technologies

Agilent Technologies E4430B Manual de instalación y operación

Agilent Technologies

Agilent Technologies V2920A Manual de usuario

Agilent Technologies

Agilent Technologies ESG-D Series Guía de configuración

Agilent Technologies

Agilent Technologies n5181a Manual de usuario

Agilent Technologies

Agilent Technologies 8640b Manual de usuario

Agilent Technologies

Agilent Technologies E8663B Manual de usuario

Agilent Technologies

Agilent Technologies N4000A Manual de servicio

Manuales populares de Generador portátil de otras marcas

Kohler

Kohler 20EORZ Manual de instrucciones

Powerhorse

Powerhorse 83171 Manual de usuario

HURST

HURST ML-630-SI Manual de usuario

ETQ

ETQ TG4000 Manual de usuario

Briggs & Stratton

Briggs & Stratton 40265 Guía de configuración

ConMed

ConMed 7550 Manual de usuario

Owon

Owon Waveform Generator Manual de usuario

evertz

evertz 7700 Series Manual de usuario

Power Stroke

Power Stroke PS906025 Manual de usuario

Firefly

Firefly Cygnus CYG2400/460/24 Manual de usuario

Draper

Draper PG950S Actualización de firmware

PowerBoss

PowerBoss PowerBoss Manual de usuario

SDMO

SDMO SH 4000 Manual de usuario

EINHELL

EINHELL STE 5500 Manual de usuario

Wanco

Wanco WI3000P Manual de usuario

Full Boar

Full Boar FBT-3300 Manual de usuario

Dwyer Instruments

Dwyer Instruments ASG Manual de usuario

Westinghouse

Westinghouse WH1000i Series Manual de usuario