Agilent Technologies U2300A Series Manual de usuario

Agilent Technologies

Agilent U2300A Series

USB Multifunction Data

Acquisition Devices

User’s Guide

II U2300A Series DAQ User’s Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

U2351-90002

Edition

Fourth Edition, 1September 2009

Printed in Malaysia

Agilent Technologies, Inc.

Bayan Lepas Free Industrial Zone,

11900 Penang, Malaysia

Trademark Acknowledgements

Pentium is a U.S. registered trademark of

Intel Corporation.

Microsoft, Visual Studio, Windows, and MS

Windows are trademarks of Microsoft Cor-

poration in the United States and/or other

countries.

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

U2300A Series DAQ User’s Guide III

Safety Information

The following general safety precautions must be observed during all phases of this instrument. Failure to comply

with these precautions or with specific warnings elsewhere in this manual violates safety standards of design,

manufacture, and intended use of the instrument. Agilent Technologies, Inc. assumes no liability for the

customer’s failure to comply with these requirements.

Safety Symbols

The following symbols indicate the precautions taken to maintain safe operation

of the instrument.

Regulatory Markings

Direct current

Warning

The CE mark shows that the product complies with all the

relevant European Legal Directives (if accompanied by a year, it

signifies when the design was proven).

The CSA mark is a registered trademark of the Canadian Stan-

dards Association. A CSA mark with the indicators "C" and "US"

means that the product is certified for both the U.S. and Canadian

markets, to the applicable American and Canadian standards.

The UL Mark is a registered trademark of Underwriters Laborato-

ries Inc. UL listing mark with the indicators "C" and "US” indi-

cates the product compliance with both Canadian and U.S.

requirements.

The C-tick mark is a registered trademark of the Spectrum Man-

agement Agency of Australia. This signifies compliance with the

Australian EMC Framework regulations under the terms of the

Radio Communications Act of 1992.

IV U2300A Series DAQ User’s Guide

General Safety Information

WARNING

• Do not use the device if it is damaged. Before you use the device,

inspect the case. Look for cracks or missing plastic. Do not operate the

device around explosive gas, vapor, or dust.

• Do not apply more than the rated voltage (as marked on the device)

between terminals, or between terminal and external ground.

• Always use the device with the cables provided.

• Observe all markings on the device before connecting to the device.

• Turn off the device and application system power before connecting to

the I/O terminals.

• When servicing the device, use only specified replacement parts.

• Do not operate the device with the removable cover removed or

loosened.

• Do not connect any cables and terminal block prior to performing

self-test process.

• Use only the power adapter supplied by the manufacturer to avoid any

unexpected hazards.

CAUTION

• Do not load the output terminals above the specified current limits.

Applying excessive voltage or overloading the device will cause

irreversible damage to the circuitry.

• Applying excessive voltage or overloading the input terminal will

damage the device permanently.

• If the device is used in a manner not specified by the manufacturer, the

protection provided by the device may be impaired.

• Always use dry cloth to clean the device. Do not use ethyl alcohol or

any other volatile liquid to clean the device.

• Do not permit any blockage of the ventilation holes of the device.

U2300A Series DAQ User’s Guide V

Waste Electrical and Electronic Equipment (WEEE) Directive

2002/96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard this

electrical/electronic product in domestic household waste.

Product Category:

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is shown as below:

Do not dispose in domestic household waste

To return this unwanted instrument, contact your nearest Agilent office, or visit:

http://www.agilent.com/environment/product

for more information.

VI U2300A Series DAQ User’s Guide

In This Guide...

1 Getting Started provides an overview of the U2300A Series, the product outlook,

product dimension, and product layout. This chapter also contains the

instructions on getting started with the U2300A Series from system requirements

checking to installations of hardware and software to the launching of the Agilent

Measurement Manager application software.

2 Connector Pins Configuration describes the connector pins configuration of

the U2300A Series USB DAQ and the signal connection between the U2300A and

external devices.

3 Features and Functions includes the information for better understanding on

the features and functions of the U2300A series USB DAQ. This includes the

operations of the analog input, analog output, digital input/output, and digital

counter subsystems.

4 Characteristics and Specifications specifies the characteristics,

environmental conditions, and specifications of the U2300A DAQ devices.

5 Calibration introduces the procedures to perform the calibration process for the

U2300A Series DAQ devices to minimize A/D measurement errors and D/A

output errors.

U2300A Series DAQ User’s Guide VII

DECLARATION OF CONFORMITY

According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014

Generic example

Manufacturer’s Name: Agilent Technologies Microwave Products (M) Sdn. Bhd

Manufacturer’s Address: Bayan Lepas Free Industrial Zone,

11900, Bayan Lepas, Penang, Malaysia

Declares under sole responsibility that the product as originally delivered

Product Name: Agilent U2300A Series Multifunction USB Data

Acquisition(DAQ) device

Models Number: U2331A, U2351A, U2352A, U2353A, U2354A, U2355A,

U2356A

Product Options: This declaration covers all options of the above product(s)

complies with the essential requirements of the following applicable European Directives, and

carries the CE marking accordingly:

Low Voltage Directive (73/23/EEC, amended by 93/68/EEC)

EMC Directive (89/336/EEC, amended by 93/68/EEC)

and conforms with the following product standards:

EMC Standard

StandardStandard

Standard

Limit

LimitLimit

Limit

IEC 61326-1:1997+A1:1998 / EN 61326-1:1997+A1:1998

CISPR 11:1990 / EN55011:1991 Class A Group 1

IEC 61000-4-2:1995+A1:1998 / EN 61000-4-2:1995 4 kV CD, 8 kV AD

IEC 61000-4-3:1995 / EN 61000-4-3:1995 3 V/m, 80-1000 MHz

IEC 61000-4-4:1995 / EN 61000-4-4:1995 0.5 kV signal lines, 1 kV power lines

IEC 61000-4-5:1995 / EN 61000-4-5:1995 0.5 kV line-line, 1 kV line-ground

IEC 61000-4-6:1996 / EN 61000-4-6:1996 3 V, 0.15-80 MHz

IEC 61000-4-11:1994 / EN 61000-4-11:1994 1 cycle / 100%

Canada: ICES-001:1998

Australia/New Zealand: AS/NZS 2064.1

The product was tested in a typical configuration with Agilent Technologies test systems.

Safety IEC 61010-1:2001 / EN 61010-1:2001

Canada: CSA C22.2 No. 61010-1:2004

USA: UL 61010-1: 2004

This DoC applies to above-listed products placed on the EU market after:

20-October-2006

Date Mack Soh

Quality Manager

For further information, please contact your local Agilent Technologies sales office, agent or distributor,

or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, D 71034 Böblingen, Germany.

Template: A5971-5302-2, Rev. B.01 U2300 series Rev 1.0

VIII U2300A Series DAQ User’s Guide

Product Regulations

Performance Criteria

IEC 61326-1:1997+A1:1998 / EN 61326-1:1997+A1:1998 U2331A, U2351A, U2352A U2353A,

U2354A, U2355A, U2356A

CISPR 11:1990 / EN 55011:1991 – Group 1 Class A

IEC 61000-4-2:1995+A1:1998 / EN 61000-4-2:1995 (ESD 4kV

CD, 8kV AD)

IEC 61000-4-3:1995 / EN 61000-4-3:1995 (3V/m, 80% AM) A

IEC 61000-4-4:1995 / EN 61000-4-4:1995 (EFT 0.5kV line-line,

1kV line-earth)

IEC 61000-4-5:1995 / EN 61000-4-5:1995 (Surge 0.5kV line-line,

1kV line-earth)

IEC 61000-4-6:1996 / EN 61000-4-6:1996 (3V, 0.15~80 MHz,

80% AM, power line)

IEC 61000-4-11:1994 / EN 61000-4-11:1994 (Dips 1 cycle,

100%)

Canada: ICES-001:1998

Australia/New Zealand: AS/NZS 2064.1

EMC

IEC 61010-1:2001 / EN 61010-1:2001

Canada: CSA C22.2 No. 61010-1:2004

Safety

USA: UL 61010-1: 2004

Additional Information:

The product herewith complies with the essential requirements of the Low Voltage Directive 73/23/EEC and the

EMC Directive 89/336/EEC (including 93/68/EEC) and carries the CE Marking accordingly (European Union).

Performance Criteria:

A Pass - Normal operation, no effect.

B Pass - Temporary degradation, self recoverable.

C Pass - Temporary degradation, operator intervention required.

D Fail - Not recoverable, component damage.

N/A – Not applicable

Models Description:

U2331A – USB 64SE/32DI, 12bits, 3MSa/s Multifunction USB DAQ

U2351A – USB 16SE/8DI, 16bits, 250kSa/s Multifunction USB DAQ

U2352A – USB 16SE/8DI, 16bits, 250kSa/s Multifunction USB DAQ (without Analog output)

U2353A – USB 16SE/8DI, 16bits, 500kSa/s Multifunction USB DAQ

U2354A – USB 16SE/8DI, 16bits, 500kSa/s Multifunction USB DAQ (without Analog output)

U2355A – USB 64SE/32DI, 16bits, 250kSa/s Multifunction USB DAQ

U2356A – USB 64SE/32DI, 16bits, 500kSa/s Multifunction USB DAQ

Notes:

Regulatory Information for Canada

ICES/NMB-001:1998

This ISM device complies with Canadian ICES-001.

Cet appareil ISM est confomre à la norme NMB-001 du Canada.

Regulatory Information for Australia/New Zealand

This ISM device complies with Australian/New Zealand AS/NZS 2064.1

U2300A Series DAQ User’s Guide IX

Contents

1Getting Started

Introduction 2

Product Overview 3

Product outlook 3

Product dimension 4

Standard Purchase Items Checklist 6

Software Installation 7

A. Check Your System Requirements 8

B. Install the Agilent IO Libraries Suite 9

C. Install the Hardware Driver 10

D. Install the Agilent Measurement Manager 13

E. Connect Your Device to the PC 17

F. Launch Your Agilent Measurement Manager 20

L-Mount Kit Installation 21

General Maintenance 23

2Connector Pins Configuration

Connector Pins Configuration 26

Analog Input Signal Connection 33

Types of signal sources 33

Input configurations 34

X U2300A Series DAQ User’s Guide

Contents

3Features and Functions

Features Overview 40

Analog Input Operation Mode 41

Scan list (for continuous mode only) 45

Burst mode 46

A/D data conversion 47

AI data format 49

Analog Output Operation Mode 51

D/A reference voltage 55

AO data format 55

Digital I/O 58

General Purpose Digital Counter 61

Trigger Sources 67

Trigger types 68

Digital trigger 71

Analog trigger 72

SCPI Programming Examples 75

Analog input 75

Analog output 78

4Characteristics and Specifications

Product Characteristics 82

Product Specifications 83

Basic multifunction DAQ device specifications 83

High density multifunction DAQ device specifications 87

Electrical Measurement Specifications 91

Basic multifunction USB DAQ device specifications 91

High density multifunction USB DAQ device specifications 93

Otros manuales para U2300A Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Agilent Technologies

Agilent Technologies

Agilent Technologies ADM1000 Manual de usuario

Agilent Technologies

Agilent Technologies OmniBER 718 SDH Manual de usuario

Agilent Technologies

Agilent Technologies 4263B Manual de usuario

Agilent Technologies

Agilent Technologies Seahorse XFe Manual de usuario

Agilent Technologies

Agilent Technologies 35670A Manual de usuario

Agilent Technologies

Agilent Technologies 4339B Manual de usuario

Agilent Technologies

Agilent Technologies PSA Series Manual de instalación y operación

Agilent Technologies

Agilent Technologies E4980A Manual de usuario

Agilent Technologies

Agilent Technologies 10400B Series Manual de usuario

Agilent Technologies

Agilent Technologies OmniBER 725 Manual de usuario

Agilent Technologies

Agilent Technologies E5500A Manual de usuario

Agilent Technologies

Agilent Technologies FieldFox MW N9913A Manual de usuario

Agilent Technologies

Agilent Technologies ICP-MS Series Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 4263B Manual de usuario

Agilent Technologies

Agilent Technologies E4440A Guía de inicio rápido

Agilent Technologies

Agilent Technologies 8753ES Manual de usuario

Agilent Technologies

Agilent Technologies U1211A Manual de usuario

Agilent Technologies

Agilent Technologies 4395A Manual de usuario

Agilent Technologies

Agilent Technologies PSA Series Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 34136A Manual de usuario

Agilent Technologies

Agilent Technologies ESA-E E4402B Manual de usuario

Agilent Technologies

Agilent Technologies ACQIRIS DC122 Manual de usuario

Agilent Technologies

Agilent Technologies EPM-P Series Manual de uso y cuidado

Agilent Technologies

Agilent Technologies PSA Series Manual de instalación y operación

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario