Agilent Technologies E4412A Manual de servicio

Agilent Technologies

Agilent

E4412A and E4413A

Power Sensor

Operating and Service

Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

E4412-90013

Edition

May 29, 2009

Agilent Technologies, Inc.

5301 Stevens Creek Blvd.

Santa Clara, CA 95052 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

iii

Certification

Agilent Technologies certifies that this product met its published

specifications at the time of shipment. Agilent further certifies that its

calibration measurements are traceable to the United States National

Institute of Standard and Technology (formerly National Bureau of

Standards), to the extent allowed by that organization’s calibration facility,

and to the calibration facilities of other International Standards

Organization members.

General Warranty

The material contained in this document is provided “as is,” and is subject

to being changed, without notice, in future editions. Further, to the

maximum extent permitted by applicable law, Agilent disclaims all

warranties, either express or implied with regard to this manual and any

information contained herein, including but not limited to the implied

warranties of merchantability and fitness for a particular purpose. Agilent

shall not be liable for errors or for incidental or consequential damages in

connection with the furnishing, use, or performance of this document or

any information contained herein. Should Agilent and the user have a

separate written agreement with warranty terms covering the material in

this document that conflict with these terms, the warranty terms in the

separate agreement shall control. Duration and conditions of warranty for

this product may be superseded when the product is integrated into

(becomes a part of) other Agilent products. During the warranty period,

Agilent will, at its option, either repair or replace products which prove to

be defective. The warranty period begins on the date of delivery or on the

date of installation if installed by Agilent.

Warranty Service

For warranty service or repair, this product must be returned to a service

facility designated by Agilent. For products returned to Agilent for

warranty service, the Buyer shall prepay shipping charges to Agilent and

Agilent shall pay shipping charges to return the product to the Buyer.

However, the Buyer shall pay all shipping charges, duties, and taxes for

products returned to Agilent from another country.

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper

or inadequate maintenance by the Buyer, Buyer-supplied products or

interfacing, unauthorized modification or misuse, operation outside of the

environmental specifications for the product, or improper site preparation

or maintenance.

The design and implementation of any circuit on this product is the sole

responsibility of the Buyer. Agilent does not warrant the Buyer’s circuitry

or malfunctions of Agilent products that result from the Buyer’s circuitry.

In addition, Agilent does not warrant any damage that occurs as a result of

the Buyer’s circuit or any defects that result from Buyer-supplied products.

To the extent allowed by local law, Agilent makes no other warranty,

expressed or implied, whether written or oral with respect to this product

and specifically disclaims any implied warranty or condition of

merchantability, fitness for a particular purpose or satisfactory quality.

Exclusive Remedies

To the extent allowed by local law, the remedies provided herein are the

Buyer’s sole and exclusive remedies. Agilent shall not be liable for any

direct, indirect, special, incidental, or consequential damages (including

lost profit or data), whether based on warranty, contract, tort, or any other

legal theory.

Restricted Rights Legend

The Software and Documentation have been developed entirely at private

expense. They are delivered and licensed as “commercial computer

software” as defined in DFARS 252.227-7013 (Oct 1988), DFARS

252.211-7015 (May 1991), or DFARS 252.227-7014 (Jun 1995), as a

“commercial item” as defined in FAR 2.101(a), or as “restricted computer

software” as defined in FAR 52.227-19 (Jun 1987) (or any equivalent

agency regulation or contract clause), whichever is applicable. You have

only those rights provided for such Software and Documentation by the

applicable FAR or DFARS clause or the Agilent standard software

agreement for the product involved.

Technology Licenses

The hardware and/or software described in this document are furnished

under a license and may be used or copied only in accordance with the

terms of such license.

Safety Summary

The following general safety precautions must be observed during all

phases of operation of this instrument. Failure to comply with these

precautions or with specific warnings elsewhere in this manual violates

safety standards of design, manufacture, and intended use of the

instrument. Agilent Technologies, Inc. assumes no liability for the

customer’s failure to comply with these requirements.

Safety Notices

WARNING

A WARNING notice denotes a hazard. It calls attention to an operating

procedure, practice, or the like that, if not correctly performed or

adhered to, could result in personal injury or loss of life. Do not proceed

beyond a WARNING notice until the indicated conditions are fully

understood and met.

CAUTION

A CAUTION notice denotes a hazard. It calls attention to an operating

procedure, practice, or the like that, if not correctly performed or adhered

to, could result in damage to the product or loss of important data. Do not

proceed beyond a CAUTION notice until the indicated conditions are fully

understood and met.

vii

Safety Symbols

The following symbol on the instrument and in the documentation

indicates precautions that must be taken to maintain safe operation of the

instrument.

Caution, risk of danger.

The Instruction Documentation Symbol. The product is marked with this symbol

when it is necessary for the user to refer to the instructions in the supplied docu-

mentation.

This symbol indicates that a device, or part of a device, may be susceptible to

electrostatic discharges (ESD) which can result in damage to the product.

Observe ESD precautions given on the product, or its user documentation, when

handling equipment bearing this mark.

Alternating current (AC).

Direct current (DC).

Both direct and alternating current.

Three-phase alternating current.

Earth (ground) TERMINAL.

ESD

viii

PROTECTIVE CONDUCTOR TERMINAL.

Frame or chasis TERMINAL.

Equipotentiality.

On (Supply).

Off (Supply).

Equipment protected throughout by DOUBLE INSULATION or

REINFORCED INSULATION.

Caution, risk of electric shock.

Caution, hot surface.

In position of bi-stable push control.

Out position of bi-stable push control.

Regulatory Markings

The CE mark shows that the product complies with all the relevant European legal

Directives (if accompanied by a year, it signifies when the design was proven).

The C-tick mark is a registered trademark of the Spectrum management Agency

of Australia. This signifies compliance with the Australian EMC Framework regu-

lations under the terms of the Radio Communications Act of 1992.

This product complies with the WEEE Directive (2002/96/EC) marking equip-

ment. The affixed product label indicates that you must not discard this electri-

cal/electronic product in domestic household waste.

This ISM device complies with the Canadian ICES-001,

Cet appareil ISM est conforme à la norme NMB-001 du Canada.

ISM 1- A

N10149

ICES/NMB - 001

Otros manuales para E4412A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Inversor de Agilent Technologies

Agilent Technologies

Agilent Technologies Agilent 33500 Series Manual de servicio

Agilent Technologies

Agilent Technologies E4400-60230 g Guía de inicio rápido

Agilent Technologies

Agilent Technologies U9391C Manual de servicio

Agilent Technologies

Agilent Technologies 8648A Manual de servicio

Agilent Technologies

Agilent Technologies E4438C Manual de usuario

Agilent Technologies

Agilent Technologies E8257D PSG Manual de usuario

Agilent Technologies

Agilent Technologies 33250A Manual de usuario

Agilent Technologies

Agilent Technologies AGILENT U2761A Manual de usuario

Agilent Technologies

Agilent Technologies 33120A Manual de usuario

Agilent Technologies

Agilent Technologies E8257D/67D Manual de usuario

Agilent Technologies

Agilent Technologies 33220A Manual de usuario

Agilent Technologies

Agilent Technologies 33120A Manual de usuario

Agilent Technologies

Agilent Technologies 205AG Manual de servicio

Agilent Technologies

Agilent Technologies N4970A Manual de usuario

Agilent Technologies

Agilent Technologies MXG (Series A and B) Manual de usuario

Agilent Technologies

Agilent Technologies n5181a Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies N5106A PXB Baseband Manual de usuario

Agilent Technologies

Agilent Technologies 33250A Manual de usuario

Agilent Technologies

Agilent Technologies 16522A Manual de usuario

Agilent Technologies

Agilent Technologies E4400-60246 Manual de instalación y operación

Agilent Technologies

Agilent Technologies 8960 Manual de usuario

Agilent Technologies

Agilent Technologies E8247C PSG CW Manual de usuario

Agilent Technologies

Agilent Technologies 346A Manual de servicio

Agilent Technologies

Agilent Technologies 33120A Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario