Agilent Technologies 33120A Manual de usuario

User’s Guide

Publication Number 33120-90006 (order as 33120-90104 manual set)

Edition 6, March 2002

©Copyright Agilent Technologies, Inc. 1994-2002

For Safety information, Warranties, and Regulatory information,

see the pages following the Index.

Agilent 33120A

15 MHz Function /

Arbitrary Waveform Generator

Cover Page for Web Version ONLY (User’s Guide)

The Agilent Technologies 33120A is a high-performance 15 MHz

synthesized function generator with built-in arbitrary waveform

capability. Its combination of bench-top and system features makes this

function generator a versatile solution for your testing requirements

now and in the future.

Convenient bench-top features

10 standard waveforms

Built-in 12-bit 40 MSa/s arbitrary waveform capability

Easy-to-use knob input

Highly visible vacuum-fluorescent display

Instrument state storage

Portable, ruggedized case with non-skid feet

Flexible system features

Four downloadable 16,000-point arbitrary waveform memories

GPIB (IEEE-488) interface and RS-232 interface are standard

SCPI (Standard Commands for Programmable Instruments) compatibility

Agilent IntuiLink Arb Waveform Generation Software for

Microsoft®Windows®included

Agilent 33120A

15 MHz Function /

Arbitrary Waveform Generator

Note: Unless otherwise indicated, this manual applies to all Serial Numbers.

Page 1 (User’s Guide)

The Front Panel at a Glance

1Function / Modulation keys

2Menu operation keys

3Waveform modify keys

4Single / Internal Trigger key

(Burst and Sweep only)

5Recall / Store instrument state key

6 Enter Number key

7 Shift / Local key

8 Enter Number “units” keys

Front-Panel Number Entry

You can enter numbers from the front-panel using one of three methods.

Use the arrow keys to edit individual digits.

Use the “Enter Number” mode to enter a number with the appropriate units.

Use the knob and the arrow keys to modify the displayed number.

Increments the flashing digit.

Decrements the flashing digit.

Moves the flashing digit to the right.

Moves the flashing digit to the left.

Use “Enter” for those operations that do not

require units to be specified (AM Level,

Offset, % Duty, and Store/Recall State).

The Front-Panel Menu at a Glance

The menu is organized in a top-down tree structure with three levels.

B: SWP (Sweep) MENU

1: START F

2: STOP F

3: SWP TIME

4: SWP MODE

A: MODulation MENU

1: AM SHAPE

2: AM SOURCE

3: FM SHAPE

4: BURST CNT

5: BURST RATE

6: BURST PHAS

7: BURST SRC

8: FSK FREQ

9: FSK RATE

10: FSK SRC

C: EDIT MENU*

1: NEW ARB

[ 2: POINTS ]

[ 3: LINE EDIT ]

[ 4: POINT EDIT ]

[ 5: INVERT ]

[ 6: SAVE AS ]

7: DELETE

* The commands enclosed in square brackets ( [ ] ) are “hidden” until you make a selection from the

NEW ARB command to initiate a new edit session.

D: SYStem MENU

1: OUT TERM

2: POWER ON

3: ERROR

4: TEST

5: COMMA

6: REVISION

F: CALibration MENU*

1: SECURED or [ 1: UNSECURED ]

[ 2: CALIBRATE ]

3: CAL COUNT

4: MESSAGE

*The commands enclosed in square brackets ( [ ] ) are “hidden” unless the function generator

is UNSECURED for calibration.

E: Input / Output MENU

1: HPIB ADDR

2: INTERFACE

3: BAUD RATE

4: PARITY

5: LANGUAGE

Display Annunciators

Adrs

Rmt

Trig

Ext

FSK

Burst

Swp

ERROR

Offset

Shift

Num

Arb

Function generator is addressed to listen or talk over a remote interface.

Function generator is in remote mode (remote interface).

Function generator is waiting for a single trigger or external trigger (Burst, Sweep).

AM modulation is enabled.

FM modulation is enabled.

Function generator is set for an external modulation source (AM, FSK, Burst).

FSK (frequency-shift keying) modulation is enabled.

Burst modulation is enabled.

Sweep mode is enabled.

Hardware or remote interface command errors are detected.

The waveform is being output with an offset voltage.

“Shift” key has been pressed. Press “Shift” again to turn off.

“Enter Number” mode is enabled. Press “Shift-Cancel” to disable.

Arbitrary waveform function is enabled.

Sine waveform function is enabled.

Square waveform function is enabled.

Triangle waveform function is enabled.

Ramp waveform function is enabled.

To review the display annunciators, hold down the Shift key as you

turn on the function generator.

The Rear Panel at a Glance

1Chassis ground

2Power-line fuse-holder assembly

3Power-line voltage setting

4AM modulation input terminal

5External Trigger / FSK / Burst modulation

input terminal

6GPIB (IEEE-488) interface connector

7 RS-232 interface connector

Use the front-panel Input / Output Menu to:

 Select the GPIB or RS-232 interface (see chapter 4).

 Set the GPIB bus address (see chapter 4).

 Set the RS-232 baud rate and parity (see chapter 4).

In This Book

Quick Start Chapter 1 prepares the function generator for use and

helps you get familiar with a few of its front-panel features.

Front-Panel Menu Operation Chapter 2 introduces you to the

front-panel menu and describes some of the function generator’s

menu features.

Features and Functions Chapter 3 gives a detailed description of the

function generator’s capabilities and operation. You will find this

chapter useful whether you are operating the function generator from

the front panel or over the remote interface.

Remote Interface Reference Chapter 4 contains reference

information to help you program the function generator over the

remote interface.

Error Messages Chapter 5 lists the error messages that may appear

as you are working with the function generator. Each listing contains

enough information to help you diagnose and solve the problem.

Application Programs Chapter 6 contains several remote interface

application programs to help you develop programs for your application.

Tutorial Chapter 7 discusses the fundamentals of signal generation

and modulation techniques.

Specifications Chapter 8 lists the function generator’s specifications.

For information on using the Phase-Lock Option for the 33120A, refer to

the User’s and Service Guide included with the Option 001.

If you have questions relating to the operation of the 33120A,

call 1-800-452-4844 in the United States, or contact your nearest

Agilent Technologies Sales Office.

If you believe your 33120A has failed, refer to “Operating Checklist”,

“Types of Service Available”, and “Repackaging for Shipment” at the

beginning of chapter 6 in the 33120A Service Guide.

Otros manuales para 33120A

Tabla de contenidos

Otros manuales de Inversor de Agilent Technologies

Agilent Technologies

Agilent Technologies 8960 Manual de usuario

Agilent Technologies

Agilent Technologies E8257D PSG Manual de usuario

Agilent Technologies

Agilent Technologies 83620B Manual de usuario

Agilent Technologies

Agilent Technologies E4400-60246 Manual de instalación y operación

Agilent Technologies

Agilent Technologies 346A Manual de servicio

Agilent Technologies

Agilent Technologies n5181a Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 16522A Manual de usuario

Agilent Technologies

Agilent Technologies 33220A Manual de usuario

Agilent Technologies

Agilent Technologies N5106A PXB Baseband Manual de usuario

Agilent Technologies

Agilent Technologies 8648A Manual de servicio

Agilent Technologies

Agilent Technologies E4400B Manual de usuario

Agilent Technologies

Agilent Technologies AGILENT U2761A Manual de usuario

Agilent Technologies

Agilent Technologies Agilent 33500 Series Manual de servicio

Agilent Technologies

Agilent Technologies 33120A Manual de usuario

Agilent Technologies

Agilent Technologies 205AG Manual de servicio

Agilent Technologies

Agilent Technologies E4438C Manual de usuario

Agilent Technologies

Agilent Technologies U9391C Manual de servicio

Agilent Technologies

Agilent Technologies 33250A Manual de usuario

Agilent Technologies

Agilent Technologies N4970A Manual de usuario

Agilent Technologies

Agilent Technologies E4412A Manual de servicio

Agilent Technologies

Agilent Technologies MXG (Series A and B) Manual de usuario

Agilent Technologies

Agilent Technologies 33250A Manual de usuario

Agilent Technologies

Agilent Technologies E8257D/67D Manual de usuario

Agilent Technologies

Agilent Technologies E4400-60230 g Guía de inicio rápido

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario