afx light BEAM-100LED-MKII Manual de usuario
GB - User Manual - p. 9
F - Manuel d'Utilisation - p. 13
D - Bedienungsanleitung - S. 17
NL - Handleiding - p. 21
Assembled in PRC
Designed by LOTRONIC S.A.
Av. Z. Gramme 9
B - 1480 Saintes
BEAM-100LED-MKII
CODE: 16-2081
LED MOVING HEAD 100W
WITH DUAL PRISM & LIGHT RING
LYRE A LED 100W
AVEC DOUBLE PRISME & ANNEAU LUMINEUX
LED MOVING HEAD 100W
MIT DOPPELPRISMA & LICHTRING
LED MOVING HEAD 100W
MET DUAL PRISMA & LICHT RING
EN 2
CONNECTORS (g. 1)
INSTALLATION DIAGRAM (g. 3) FIXTURE LINKING (g. 4)
DISPLAY (g. 2)
EN3
www.afx-light.com
PHOTOMETRIC DIAGRAM (g. 5)
GOBO & COLOUR WHEEL
DIMENSIONS
EN 4© Copyright LOTRONIC 2022
DMX CHANNEL TABLE
EN5
www.afx-light.com
EN 6© Copyright LOTRONIC 2022
EN7
www.afx-light.com
EN 8© Copyright LOTRONIC 2022
EN9
www.afx-light.com
USER MANUAL
UNPACKING INSTRUCTIONS
Immediately upon receiving a xture, carefully unpack the carton, check the contents to ensure
that all parts are present and have been received in good condition. Notify the freight company
immediately and retain packing material for inspection if any parts appear to be damaged from
shipping or the carton itself shows signs of mishandling. Keep the carton and all packing materi-
als. In the event that a xture must be returned to the factory, it is important that the xture be
returned in the original factory box and packing.
CONTENTS OF THE CARTON
• 1 x LED light effect
• 2x omega clamp
• 1x Powercon cable
• 1x DMX lead
• 1x User Manual
EXPLANATION OF SYMBOLS ON THE SILKSCREEN
The triangle containing a light-
ning symbol is used to indicate
whenever your health is at risk (due to
electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the ap-
pliance.
The unit complies with UK standards
For indoor use only
0.5m
Minimum distance between the appliance and other objects
Don’t stare into the light beam
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
Please read this manual carefully before operating this product.
SAFETY RECOMMENDATIONS
• Please read these instructions carefully, they include important information about the installa-
tion, usage and maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that
he also receives this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line voltage you
are connecting to is not higher than that stated on the bottom of the xture.
• The appliance is part of class I and must exclusively connected to an earthed mains outlet.
• This product is intended for indoor use only!
• To prevent risk of re or shock, do not expose xture to rain or moisture. Make sure there are no
ammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from
adjacent surfaces. Be sure that no ventilation slots are blocked.
• The minimum distance luminaire from that part of the luminaire or lamp to the lighted object is
0.5m.
0.5m
• The max. ambient temperature (Ta) is 40°C. Don’t operate the xture at higher temperatures.
• The surface temperature of the unit may reach up to 85°C. DO NOT TOUCH the housing bare-
hand during its operation. Turn off the power and allow about 15 minutes for the unit to cool
down before replacing or servicing.
• DO NOT OPEN the unit within 5 minutes after switching off.
CAUTION
DO NOT OPEN THE HOUSING
SHOCK HAZARD
EN 10 © Copyright LOTRONIC 2022
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center. Always use the same type of
spare parts.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!.
• The product is for decorative purposes only and not suitable as a household room illumination.
• If the external exible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualied person in order to avoid a hazard.
• The lenses, housing or ultraviolet lter must be replaced if they are visibly damaged.
• The light source of this device is not replaceable. If it is defective, the entire unit must be discard-
ed.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
FEATURES
• 1 x 100W LED
• 28 x 0.2W RGB SMD LEDs for the light ring
• DMX, master-slave, sound-controlled and auto operation
• 22/24/30 DMX channels
• "Totem" mode
• 1 colour wheel with 11 colours + open
• 1 static gobo wheel with 14 gobo's + open
• Gobo shake
• High precision optics with 2° projection angle
• Electric focus over 2-3m
• 16- & 24-facet prism with adjustable speed and direction
• Smooth, accurate 8/16 bit PAN/TILT with inversion
• Scan position memory with auto repositioning after an incident
• Rainbow effect with adjustable direction and speed
• Linear dimmer
• 25x/sec high speed LED shutter/strobe effect with variable speed
• Preset variable/random strobe and dimming pulse effect
• 1.8" TFT LCD display
• Fan cooling
• Management system with constant temperature readout
• Mounting via 2 omega clamps & safety eyelet
FUSE REPLACEMENT
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
With a screwdriver wedge the fuse holder out of its housing.
Remove the damaged fuse from its holder and replace with exactly the same type of fuse.
Insert the fuse holder back in its place and reconnect power.
Warning: If after replacing the fuse you continue to blow fuses, STOP using the unit. Contact cus-
tomer support for further instructions. Continuing to use the unit may cause serious damage.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Equipo de iluminación de afx light
afx light
afx light BARLED200-FX Manual de usuario
afx light
afx light SPOT180LED Manual de usuario
afx light
afx light BLADE5-FX Manual de usuario
afx light
afx light LEDWASH-1912Z Manual de usuario
afx light
afx light HYBRID180 Manual de usuario
afx light
afx light TLIGHT-WWCW Manual de usuario
afx light
afx light WASH-1940-RGB Manual de usuario
afx light
afx light GREEN-100 Manual de usuario
afx light
afx light HOTBEAM-3R Manual de usuario
afx light
afx light LF-NW Series Manual de usuario
afx light
afx light BARCOB2 Manual de usuario
afx light
afx light PARLED-710S Manual de usuario
afx light
afx light COMET-FX Manual de usuario
afx light
afx light BEEDREAM-1940RGB Manual de usuario
afx light
afx light IPAR-507 Manual de usuario
afx light
afx light MINIBEAM32 Manual de usuario
afx light
afx light SPARK-FIREWORKS Manual de usuario
afx light
afx light BARLED18-PIX Manual de usuario
afx light
afx light CLUB-UV450 Manual de usuario
afx light
afx light CLUB-UV450-IP Manual de usuario
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
