Aerpro APMSWC1 Manual de usuario
APMSWC1
aerpro.com
manual
WIRELESS CHARGING
DASH & VENT MOUNT
MAGNETIC HOLDER
Product Information
Fixing Plate
Hook
Clip
Adjustable Collar
Power Input Port
Adhesive
Mount
Charging
Contact
Magnetic
Head
Alignment
Magnet Charging
Indicator LED
Attaching the mount to the holder
1. Place the adjustable collar over the ball of
the mount
2. Press the ball of the mount into the back of
the magnetic wireless charging head
3. Move the magnetic wireless charging head
to the desired position and tighten the
adjustable collar.
Attaching the adhesive mount to a flat
surface
1. Clean any oil, debris, or dust on the area
where 3M base is to be placed. If possible use
an alcohol wipe to help with adhesion.
2. Peel off the protection sheet from the 3M
base and stick to chosen area by strongly
pressing the base for an extended period of
time.
3. The strength of the 3M tape will perform
perfectly after 4-5 hours of installation.
4. Do not use the magnetic holder for the above
period of time or the mount may become
unstuck.
Attaching the hook mount to a vent
1. Unfasten the hook clip sufficiently by
rotating the fixing plate.
2. Insert the hook clip to the center of the vents
3. Rotate the adjustable collar so that the fixing
plate tightens against the hook to avoid the
presence of any gap between fixing plate and
vent.
4. Check if vent clip is fixed firmly and
correctly.
The Vent Mount is designed to be used only
with FLAT air vent blades.
*
Attaching the hook mount to a vent
Charging your device
1. Connect the supplied USB cable to the
power input port of the magnetic wireless
charging head
2. Connect opposite end of the supplied USB
cable into a USB car charger or USB power
adapter (Not Included).
3. The charging indicator LED will turn white.
The magnetic wireless charging holder is now
ready for your smartphone or device.
4. Placing your smartphone on to the
magnetic wireless charging head is made
easy by the alignment magnet.
5. With successful alignment the charging
indicator LED will turn blue and charging will
commence.
6. If the charging indicator LED flashes white
and blue there is a problem with the
connection. Reposition your smartphone to fix
the problem.
CAUTION
1. The magnet used in this product will have no
negative impact on the phone. In case of any
applications not working correctly, please
restart application and slightly adjust the
position of where smartphone is mounted.
2. Never mount a smartphone onto holder with
a magnetic credit card in the smartphone case.
3. Be careful not to have the magnet be in
reach of medical devices.
4. Periodically check the tightness of the hook
vent clip to prevent unexpected dropping of
phone.
5. When removing your smartphone from the
magnetic holder, twist and slide, rather than
pulling off directly. This will help protect the
vent blades from being removed or damaged
due to the extreme strength of the magnets.
6. Do not install the holder where it will obstruct
the drivers view.
7. Periodically check the strength of the 3M
base.
8. Do not operate phone and holder while
driving.
1. The car charger or adapter used to power
the Wireless Charging Magnetic Holder that
outputs the proper voltage is required (Not
included).
2. The connected power car charger or
adapter used must output DC
5V/2A,9V/2A,12V/2A. Using a charger or
adapter with a lower output may result in
malfunction or overheating.
3. Charging speed may vary depending on
device specifications, input voltage and
environment.
5. Phone cases or metal plates for magnetic
attachment may interfere with wireless
charging.
6. It’s normal for the charger and your device
to get hot whilst charging. It will get even
hotter if the device is also being used while
charging. Allow the charger to cool if too hot.
NOTE
Inclusions
Wireless charging magnetic head
Vent mount
Adhesive mount
Type C USB charging cable
Technical assistance
If you need assistance with your Aerpro
product call Aerpro Support Australia.
TEL: 03 – 8587 8898 FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
This manual is considered correct at time of
writing but is subject to change. For latest
manuals and updates refer to the website.
www.aerpro.com
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Aerpro
Aerpro
Aerpro Connects 2 CHFO7C Manual de usuario
Aerpro
Aerpro FP9450G8 Guía
Aerpro
Aerpro Connects 2 Manual de usuario
Aerpro
Aerpro FP9450GK Manual de usuario
Aerpro
Aerpro FP9450BK Guía
Aerpro
Aerpro VE 2 Series Manual de instrucciones
Aerpro
Aerpro Connects 2 CHFO6C Manual de usuario
Aerpro
Aerpro FP8435 Manual de usuario
Aerpro
Aerpro FP8020 Manual de usuario
Aerpro
Aerpro APFIND2 Manual de usuario
