Advantech PPC-154 Manual de usuario

PPC-154

Pentium® 4 Processor-Based

Panel PC with 15" Color TFT

LCD Display

Users Manual

PPC-154 User’s Manual ii

nal manufacturer reserves the right to make improvements to the products

described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmit-

ted in any form or by any means without the prior written permission of

the original manufacturer. Information provided in this manual is

intended to be accurate and reliable. However, the original manufacturer

assumes no responsibility for its use, nor for any infringements upon the

rights of third parties that may result from such use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

VIA is a trademark of VIA Technologies, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows® is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

Winbond is a trademark of Winbond electronics corporation.

Ricoh is a trademark of Ricoh Company LTD.

All other product names or trademarks are properties of their respective

owners.

For more information on this and other Advantech products, please visit

our websites at: http://www.advantech.com

http://www.advantech.com/ppc

For technical support and service, please visit our support website at:

http://support.advantech.com

This manual is for the PPC-154.

Part No. 2008015312 1st Edition

Printed in Taiwan April. 2004

iii

FCC Class B

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a residential environment. This

equipment generates, uses and can radiate radio frequency energy. If not

installed and used in accordance with this user's manual, it may cause

harmful interference to radio communications. Note that even when this

equipment is installed and used in accordance with this user's manual,

there is still no guarantee that interference will not occur. If this equip-

ment is believed to be causing harmful interference to radio or television

reception, this can be determined by turning the equipment on and off. If

interference is occurring, the user is encouraged to try to correct the inter-

ference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment to a power outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Warning! Any changes or modifications made to the

equipment which are not expressly approved by

the relevant standards authority could void your

authority to operate the equipment.

PPC-154 User’s Manual iv

Packing List

Before you begin installing your card, please make sure that the following

materials have been shipped:

• PPC-154 series panel PC

• User's manual

• Accessories for PPC-154

- Power cord (1.8 m) - USA type (other types are available on request)

- Floppy disk with CD-ROM drive driver

- "Drivers and Utilities" CD-ROM disc

- Heat sink (optional) (refer to Notes 1 and 2 below)

If any of these items are missing or damaged, contact your distributor or

sales representative immediately.

Note1: If the unit you have bought is basic (i.e. without

a CPU, HDD, or SDRAM), you will find this

optional item in the accessory box.

Note2: If you install an Intel®processor yourself, you

must install a heat sink above the CPU. This will

avoid heat damage to the CPU.

Additional Information and Assistance

Step 1. Visit the Advantech web site at www.advantech.com where you

can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version, application

software, etc.)

• A complete description of the problem

• The exact wording of any error messages

Warning! 1. Input voltage rated 100-240 VAC, 50/60 Hz,

4 A

2. Use a 3 V @ 195 mA lithium battery

3. Packing: please carry the unit with both

hands, handle with care

4. Maintenance: to properly maintain and clean

the surfaces, use only approved products or

clean with a dry applicator

5. CompactFlash: Turn off power before insert-

ing or removing CompactFlash storage card.

Contact information:

Our European representative:

Advantech Europe GmbH

Kolberger Straße 7

D-40599 Düsseldorf, Germany

Tel: 49-211-97477350

Fax: 49-211-97477300

PPC-154 User’s Manual vi

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or let-

ting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according

to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE

THE STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR

ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT. THE

EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED.REPLACE ONLY WITH THE SAME OR EQUIVALENT

TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED

BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUC-

TIONS.

The sound pressure level at the operator's position according to IEC 704-1:1982 is

no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advan-

tech disclaims all responsibility for the accuracy of any statements contained

herein.

vii

W i c h t i g e S i c h e r h e i s h i n w e i s e

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie

Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch

zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht

zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen

oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor überhit-

zung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann.

Es sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu

beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom

Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädi-

gung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten

in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag aus-

lösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen

Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen

und von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert

oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Batte-

rie.Ersatz nur durch densellben order einem vom Hersteller empfohlene-

mahnlichen Typ. Entsorgung gebrauchter Batterien navh Angaben des

Herstellers.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000

beträgt 70dB(A) oder weiger.

Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend

der IEC-704-1 erstellt. Advantech lehnt jegliche Verantwortung für die

Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab.

PPC-154 User’s Manual viii

|Contents

Chapter 1 General Information ........................................2

1.1 Introduction ....................................................................... 2

1.2 Specifications .................................................................... 3

1.3 Dimensions........................................................................ 6

Figure 1.1:Dimensions of the PPC-154 .......................... 6

Chapter 2 System Setup...................................................12

2.1 A Quick Tour of the Panel PC ........................................ 12

Figure 2.1:Front view of PPC-154 panel PC ................ 12

Figure 2.2:Left side view of the panel PC .................... 13

Figure 2.3:Rear view of the panel PC........................... 13

2.2 Preparing for First-time Use............................................ 14

2.3 Installation Procedures .................................................... 14

2.3.1 Connecting the power cord ........................................... 14

2.3.2 Connecting the keyboard and mouse............................ 14

2.3.3 Switching on the power ................................................ 14

2.4 Running the BIOS Setup Program .................................. 15

2.5 Installing System Software.............................................. 16

2.6 Installing the Drivers....................................................... 17

Chapter 3 Using the Panel PC.........................................20

3.1 Introduction ..................................................................... 20

3.2 Floppy drive .................................................................... 20

Figure 3.1:Inserting and ejecting a floppy disk ............ 20

3.3 CD-ROM Drive............................................................... 21

Figure 3.2:Inserting and ejecting a CD-ROM .............. 21

3.4 Multi-card Reader .......................................................... 22

Figure 3.3:Opening the card reader’s door ................... 22

Figure 3.4:Inserting and ejecting a PCMCIA card ....... 22

3.5 PS/2 Mouse and Keyboard.............................................. 23

3.6 PCI Bus Expansion.......................................................... 23

Figure 3.5:PCI bus expansion....................................... 23

3.7 Parallel port ..................................................................... 24

3.8 Serial COM ports ............................................................ 24

3.9 VGA Port......................................................................... 25

3.10 Game Port........................................................................ 25

3.11 USB Ports........................................................................ 25

3.12 Audio Interface................................................................ 26

3.13 Ethernet ........................................................................... 26

3.14 Touchscreen (Optional)................................................... 26

PPC-153 User’s Manual x

Chapter 4 Hardware Installation and Upgrade ............28

4.1 Jumpers and Connectors.................................................. 28

4.2 Disassembling the Panel PC............................................ 29

Figure 4.1:Unscrew the screw of side cover................. 29

Figure 4.2:Unscrewing rear cover of the panel PC....... 29

Figure 4.3:Opening the rear cover ................................ 30

Figure 4.4:The PPC without the Rear Cover ................ 30

4.3 Installing the 2.5" Hard Disk Drive (HDD) .................... 31

Figure 4.5:Screw the HDD metal frame to the side of the

HDD31

Figure 4.6:Place the HDD frame so it fits with the studs.

Figure 4.7:Plug the EIDE cable into the HDD ............. 32

Figure 4.8:Screw the right side of the metal plate to fix it

Figure 4.9:Screw the left side of the metal plate to fix it..

4.4 Installing the Central Processing Unit (CPU) ................. 33

4.5 Installing the DDR SDRAM Memory Module............... 35

Figure 4.10:Placing the memory module in the DIMM 35

Chapter 5 Jumper Settings &

Connectors 38

5.1 Jumpers and Connectors.................................................. 38

5.1.1 Setting jumpers ............................................................. 38

5.1.2 Jumpers and switches.................................................... 39

Table 5.1:Jumpers, switches and their functions .......... 39

5.1.3 Jumper Locations.......................................................... 39

Figure 5.1:Jumpers on the PPC-153 motherboard........ 39

5.1.4 Connectors .................................................................... 40

Table 5.2:Panel PC connectors ..................................... 40

5.1.5 Locating connectors...................................................... 41

Figure 5.2:Connectors on PPC-153 motherboard......... 41

5.2 CPU Installation .............................................................. 42

5.3 CMOS Clear for External RTC (JP3) ............................. 42

Table 5.4:CMOS clear (JP3)......................................... 42

5.4 COM-port interface (JP4, JP5)........................................ 43

5.4.1 COM2 RS-232/422/485 setting (JP4)........................... 43

Table 5.5:COM2 RS-232/422/485 setting (JP4)........... 43

Table 5.6:COM 1/2 Pin 9 setting (JP5)......................... 44

5.5 VGA interface ................................................................. 44

5.5.1 LCD panel power setting .............................................. 44

Table 5.7:LCD Panel Power Setting (JP2) ................... 44

Chapter 6 Driver Installation..........................................46

Tabla de contenidos

Otros manuales de Panel táctil de Advantech

Advantech

Advantech TPC-60S Manual de usuario

Advantech

Advantech IPPC-8151S Series Manual de usuario

Advantech

Advantech TPC-1582H Manual de usuario

Advantech

Advantech PPC-415W Manual de instalación y operación

Advantech

Advantech TPC-300 Elkhart Lake Series Manual de usuario

Advantech

Advantech TPC-1260 Manual de usuario

Advantech

Advantech IPPC-6172F Series Manual de usuario

Advantech

Advantech PPC-123 Manual de usuario

Advantech

Advantech UTC-307GP-ATB0E Manual de instalación y operación

Advantech

Advantech IPPC-7157 Series Manual de usuario

Advantech

Advantech PPC-S155T Manual de usuario

Advantech

Advantech PPC-310W EHL Manual de usuario

Advantech

Advantech PPC-100 Manual de usuario

Advantech

Advantech PPC-155T Manual de usuario

Advantech

Advantech IPPC-7158 Series Manual de usuario

Advantech

Advantech PPC-612 Manual de usuario

Advantech

Advantech PPC-315W TGL Manual de usuario

Advantech

Advantech TPC-1550H Manual de usuario

Advantech

Advantech UTC-520F Manual de usuario

Advantech

Advantech TPC-1070 Manual de usuario

Advantech

Advantech PPC-6121 Instrucciones de instalación

Advantech

Advantech PPC-6151C Manual de usuario

Advantech

Advantech TPC-300 Series Manual de usuario

Advantech

Advantech PPC-3150 Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

B&R Industries

B&R Industries MAPPC900-ENG Manual de usuario