Advantech ROM-5620 Manual de usuario

User Manual

ROM-5620

NXP i.MX8X Cortex®-A35

SMARC 2.0/2.1 Computer-on-

Module

ROM-5620 User Manual ii

The documentation and the software included with this product are copyrighted 2020

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgments

Arm is trademarks of Arm Corporation

NXP is trademarks of NXP Corporation

All other product names or trademarks are properties of their respective owners

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident, or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any on screen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an return merchandise authori-

zation (RMA) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2006562000 Edition 1

Printed in China May 2020

iii ROM-5620 User Manual

Declaration of Conformity

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

Consult the dealer or an experienced radio/TV technician for help

Ordering Information

Packing List

Before installation, please ensure the following items have been shipped:

1 x ROM-5620

4 x Screws

1 x China ROHS

Part No. Description

ROM-5620CE-OEA1E SMARC2.0/2.1 NXP i.MX8X Dual Plus, 2GB, 0~60 °C (32 ~

140 °F)

ROM-5620CU-OEA1E SMARC2.0/2.1 NXP i.MX8X Quad Plus, 2GB, 0~60 °C (32 ~

140 °F)

ROM-5620WE-OEA1E SMARC2.0/2.1 NXP i.MX8X Dual Plus, 2GB, -40~85 °C (-40 ~

185 °F)

ROM-5620WU-OEA1E SMARC2.0/2.1 NXP i.MX8X Quad Plus, 2GB, -40~85 °C (-40

~ 185 °F)

ROM-DB5901-SWA1 Development board for SMARC v2.0 RISC Module series

ROM-5620 User Manual iv

Optional Accessories

*Please contact us for suggestions on suitable cellular modules for your region.

Part No. Description

1701100300 Debug port cable for ROM-5620

1700019474 D-SUB 9P(F)/D-SUB 9P(F) RS232/RS485 100c

1970004483T001 Heat Spreader for -40 ~ 85 °C (-40 ~ 185 °F)

1960063089N001 Semi Heat Sink for -40 ~ 85 °C (-40 ~ 185 °F)

193B021490 Screw for Heat Spreader and Semi Heat Sink

96PSA-A36W12R1-3 ADAPTER 100-240V 36W 12V 3A

1700001524 Power Cord 3P UL 10A 125V 180 cm (70.8 in )

170203183C Power Cord 3P Europe (WS-010+WS-083) 183 cm (72 in)

170203180A Power Cord 3P UK 2.5A/3A 250V 183cm (72 in)

1700008921 Power Cord 3P PSE 183cm (72 in)

SQF-ISDM1-16G-21C SQF SD Card I-SD UHS-I MLC 16G (0~70 °C) (32 ~ 158 °F)

SQF-ISDM1-16G-21E SQF I-SD UHS-I MLC 16G -40~85 °C (-40 ~ 185 °F)

EWM-W163M201E 802.11 a/b/g/n/ac,QCA6174A,2T2R,w/BT4.1,M.2 2230

1750008717-01 Dipole Ant. D.B 2.4/5G WIFI 3dBi SMA/M-R BLK

1750007965-01 Antenna Cable R/P SMA (M) to MHF4, 300 mm (11.8 in)

EWM-C117FL06E* LTE 4G,3G WCDMA/DC-HSPA+, 2G module, MPCI-L280H

1750007990-01 Antenna 4G/LTE full band L=11 cm (94.3 in) 50 Ohm

1750006009 Antenna Cable SMA (F) to MHF 1.32 25cm (9.84 in)

v ROM-5620 User Manual

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for future reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged

Liquid has penetrated into the equipment

The equipment has been exposed to moisture

The equipment does not work well, or you cannot get it to work according to

the user's manual

The equipment has been dropped and damaged

The equipment has obvious signs of breakage

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other

cards while the PC is on.

Disconnect power before making any configuration changes. The sudden rush

of power as you connect a jumper or install a card may damage sensitive elec-

tronic components.

ROM-5620 User Manual vi

vii ROM-5620 User Manual

Contents

Chapter 1 General Introduction ...........................1

1.1 Introduction ............................................................................................... 2

1.2 Product Features....................................................................................... 2

1.3 Mechanical Specifications......................................................................... 3

1.4 Electrical Specifications ............................................................................ 4

1.5 Environmental Specifications.................................................................... 5

Chapter 2 H/W Installation....................................7

2.1 Board Connectors ..................................................................................... 8

2.1.1 Connector List............................................................................... 8

2.2 Block Diagram......................................................................................... 10

Figure 2.1 ROM-5620 Block Diagram........................................ 10

2.3 Functions Available for ROM-DB5901-SWA1......................................... 10

Chapter 3 Pin Definition and Start Guide..........13

3.1 Pin Definition........................................................................................... 14

Table 3.1: MXM 3.0 Golden Finger ........................................... 14

3.2 Quick Start Guide.................................................................................... 17

3.2.1 Debug Port Connection............................................................... 17

3.2.2 Debug Port Settings.................................................................... 18

Chapter 4 Software Functionality ......................19

4.1 Test Tools ............................................................................................... 20

4.1.1 Display Test ................................................................................ 20

4.1.2 Audio Test................................................................................... 24

4.1.3 4G Test ....................................................................................... 25

4.1.4 WIFI/BT Test............................................................................... 26

4.1.5 UART Test .................................................................................. 26

4.1.6 I2C Test ...................................................................................... 27

4.1.7 USB Test..................................................................................... 28

4.1.8 RTC Test..................................................................................... 28

4.1.9 eMMC/SD/SPI Flash Test........................................................... 29

4.1.10 Ethernet Test .............................................................................. 29

4.1.11 GPIO Test................................................................................... 30

4.1.12 Watchdog Test............................................................................ 31

4.1.13 Camera Test ............................................................................... 31

4.1.14 CANbus Test............................................................................... 31

4.1.15 TPM Test .................................................................................... 32

Chapter 5 Embedded O.S. ..................................33

5.1 Introduction ............................................................................................. 34

5.1.1 Device Tree Source File Select for ROM-5620........................... 34

Chapter 6 System Recovery...............................35

6.1 System Recovery .................................................................................... 36

ROM-5620 User Manual viii

6.1.1 Recovery by SD Card................................................................. 36

6.1.2 Recovery by UUU Tool............................................................... 37

Chapter 7 Advantech Services.......................... 39

7.1 RISC Design-In Services ........................................................................ 40

7.2 Contact Information................................................................................. 43

7.3 Technical Support and Assistance.......................................................... 43

7.3.1 Warranty Policy........................................................................... 43

7.3.2 Repair Process ........................................................................... 44

Chapter 1

1General Introduction

This chapter briefly introduces the

ROM-5620 platform

Sections include:

Introduction

Specifications

ROM-5620 User Manual 2

1.1 Introduction

Advantech ROM-5620 SMARC2.0/2.1 Computer-on-Module (COM) is powered by

NXP i.MX 8X SoC which features 2 ~ 4 Arm Cortex-A35 cores for applications in the

automotive and industrial market. ROM-5620 has one Cortex-M4F core for real-time

processing, and one Tensilica Hi-Fi 4 DSP for efficient audio and voice processing. A

Vivante GC7000 Lite, 4K H.265 capable decoder, and dual 1080P60 display control-

lers enable excellent graphics processing performance. ROM-5620 is paired with

Advantech’s ROM-DB5901 Evaluation Carrier Board for faster end user peripheral

integration and decreased time-to-market. Reference schematics, layout checklists,

and other documentation necessary for carrier board development are provided. This

package also includes open-sourced Linux BSP, test utilities, hardware design utili-

ties, and reference drivers. ROM-5620 is an excellent choice for diverse industrial

automation, medical, Human-machine-Interface, and portable applications.

1.2 Product Features

Compatible Module SMARC2.0 & SMARC2.1 compliance

Processor

System

CPU NXP i.MX 8DualXPlus (2 x Cortex-A35) or 8QuadX-

Plus (4 x Cortex-A35) 1.2GHz

MCU 1 x Cortex-M4F core

DSP 1 x Tensilica HiFi 4 DSP

Memory

Technology LPDDR4 2400 MT/s

Capacity On-board 2GB LPDDR4

Flash 16 GB eMMC NAND Flash for O.S. and 8 MB QSPI

NOR Flash for board information

Graphics

LVDS/MIPI-DSI 2 x 24-bit single channel LVDS 1080p or 2 x 4-

LANE MIPI DSI

HDMI -

Parallel RGB -

VGA -

Graphics Engine Vivante GC7000 Lite

H/W Video Codec

Supports H.265/H.264(4Kp30), WMV9/VC-1 imple,

MPEG-1, AVS, MPEG4.2 ASP, H.263 decode and

H.264(1080p30) encode

Ethernet Chipset 2 x NXP i.MX8X integrated RGMII

Speed 2 x 10/100/1000 Mbps

RTC RTC Yes

Watchdog Timer 1~6553s, default 60s, power on/off 1s

Security TPM 2.0

Tabla de contenidos

Otros manuales de Computadora de placa única de Advantech

Advantech

Advantech PCE-3029 Manual de usuario

Advantech

Advantech RSB-3720 Manual de usuario

Advantech

Advantech PCA-6004 Manual de instalación y operación

Advantech

Advantech MIO-5373 Manual de instalación y operación

Advantech

Advantech MIC-3399 Manual de usuario

Advantech

Advantech MIC-3357 Manual de usuario

Advantech

Advantech PCA-6175 Manual de usuario

Advantech

Advantech PCM-9363 Manual de instalación y operación

Advantech

Advantech MIO-5152 Manual de instalación y operación

Advantech

Advantech PCA-6135 Manual de instalación y operación

Advantech

Advantech RSB-4810 Manual de usuario

Advantech

Advantech ASMB-923I Manual de instalación y operación

Advantech

Advantech PCA-6763 Manual de usuario

Advantech

Advantech PCM-3356 Manual de instalación y operación

Advantech

Advantech RSB-3730 Manual de usuario

Advantech

Advantech RSB-3710 Manual de usuario

Advantech

Advantech PCA-6184 Manual de instalación y operación

Advantech

Advantech PCA-6277 Manual de instalación y operación

Advantech

Advantech PCM-4822 Manual de usuario

Advantech

Advantech ASMB-815 Series Manual de instalación y operación

Advantech

Advantech ROM-5720 Manual de usuario

Advantech

Advantech PCM-9342 Manual de instalación y operación

Advantech

Advantech MI/O-128 Guía

Advantech

Advantech PCM-5862E Manual de usuario

Manuales populares de Computadora de placa única de otras marcas

WIN Enterprises

WIN Enterprises PL-80910 Manual de usuario

AXIOMTEK

AXIOMTEK SBC81206 Series Manual de usuario

Embest

Embest SOM-PH8800 Manual de usuario

SeaLevel

SeaLevel SBC-R9 Manual de usuario

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manual de usuario

WinSystems

WinSystems PPM-LX800-G Manual de usuario

GIGAIPC

GIGAIPC QBiX-PPC Series Manual de usuario

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manual de usuario

Commell

Commell FS-978 Manual de usuario

GIGAIPC

GIGAIPC QBiP-8665A/ Manual de usuario

VersaLogic

VersaLogic Python EBX-11 Manual de usuario

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manual de usuario

CompuLab

CompuLab SB-A510 Manual de usuario

Boser

Boser HS-7321 Manual de usuario

Premier Farnell

Premier Farnell Embest SBC8530 Manual de usuario

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manual de usuario

Aaeon

Aaeon UP Manual de usuario

Portwell

Portwell WUX Series Manual de usuario