Advantech MIC-3357 Manual de usuario

MIC-3357

6U-sized

CompactPCI™CompactPCI™

CompactPCI™

Pentium®

MMX SBC with VGA / Triple LAN

This document is copyrighted, 2001. All rights are reserved. The

original manufacturer reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from

its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

Fast EtherChannel (FEC) is a trademark of Cisco Systems, Inc.

IBM, PS/2, OS/2, and VGA are trademarks of International Business

Machines Corporation.

Intel, Pentium, Celeron, and PRO/100+ are trademarks of Intel Corpora-

tion.

Windows is a registered trademark of Microsoft Corporation.

NetWare is a trademark of Novell, Inc.

Symbios is a trademark of Symbios Logic Corporation.

PICMG™, CompactPCI™ and the PICMG™, and CompactPCI™ logos

are trademarks of the PCI Industrial Computers Manufacturers Group.

All other product names or trademarks are properties of their

respective owners.

CE Notification

The MIC-3357, developed by Advantech CO., LTD., has passed the

CE test for environment specification when shielded cables are used

for external wiring. We recommend the use of shielded cables.

Part No. 2002335700 1st Edition

Printed in Taiwan July 2001

Product warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

one year from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous

testing, most of our customers never need to use our repair service. If

an Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you

will be billed according to the cost of replacement materials, service

time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any on-

screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Packing List

Before installing your board, ensure that the following materials have

been received:

• One MIC-3357 all-in-one single board computer

• One utility CD-ROM disc

• One 6-pin mini-DIN to PS/2 keyboard and PS/2 mouse cable

• One warranty certificate

• This user's manual

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

Technical Support and Sales Assistance

If you have any technical questions about the MIC-3385 or any other

Advantech products, please visit our support website at:

• http://support.advantech.com.tw

For more information about Advantech's products and sales informa-

tion, please visit:

• http://www.advantech.com

Contents

Chapter 1 Hardware Configuration ............... 1

1.1 Introduction ........................................................................................... 2

1.2 Features ................................................................................................. 3

1.3 Specifications ........................................................................................ 3

1.3.1 Standard SBC Functions ............................................................... 3

1.3.2 10/100Base-TX Ethernet Interfaces .............................................. 4

1.3.3 PCI VGA Interface ........................................................................ 4

1.3.4 Optional Rear I/O Boards ............................................................. 5

1.3.5 Mechanical and Environmental Specifications .............................. 5

1.4 Function Block Diagram ..................................................................... 6

1.5 Jumpers ................................................................................................. 7

1.5.1 Jumper Locations ......................................................................... 7

1.5.2 COM Mode Selection (JP1 ~ 6) .................................................. 8

1.5.3 PVIO Voltage Setting (JP7) ........................................................... 8

1.5.4 Clear CMOS (JP9) ....................................................................... 9

1.5.5 CompactFlash Master/Slave Selection (JP10) .............................. 9

1.6 Connectors .......................................................................................... 10

1.7 Front Panel Connectors and Indicators ........................................... 12

1.8 Safety Precautions ............................................................................. 13

1.9 Installing SDRAM (SODIMMs) ....................................................... 14

1.10 Card Installation ................................................................................ 15

Chapter 2 Connecting

Peripherals ................................................. 17

2.1 VGA Display Connector (CN1) ......................................................... 18

2.2 Serial Ports (CN2 and CN3) ............................................................. 18

2.3 PS/2 Keyboard and Mouse Connector (CN4) .................................. 18

2.4 Ethernet Connectors (CN5, 6 and 7) ................................................ 19

2.5 USB Connector (CN8) ....................................................................... 19

2.6 Floppy Drive (CN10) .......................................................................... 19

2.7 CompactFlash Interface (CN11) ....................................................... 19

2.8 IDE Device (CN13) ............................................................................. 20

Chapter 3 LAN Configuration ....................... 21

3.1 Introduction ......................................................................................... 22

3.2 Features ............................................................................................... 22

3.3 Driver Installation .............................................................................. 22

3.4 Windows NT Drivers Setup Procedure ............................................ 25

3.5 Windows 2000 Drivers Setup Procedure .......................................... 34

Chapter 4 PCI SVGA Setup ........................... 41

4.1 Introduction ......................................................................................... 42

4.2 Installation of SVGA Driver ............................................................. 42

4.3 Installation for Windows NT 4.0 ....................................................... 43

Chapter 5 Award BIOS Setup ....................... 47

5.1 AWARD BIOS Setup .......................................................................... 48

5.1.1 Entering Setup ............................................................................. 48

5.1.2 Standard CMOS Setup ................................................................ 49

5.1.3 BIOS Features Setup ................................................................... 49

5.1.4 Chipset Features Setup ............................................................... 53

5.1.5 Power Management Setup .......................................................... 53

5.1.6 PNP/PCI Configuration Setup .................................................... 54

5.1.7 Load BIOS Defaults .................................................................... 54

5.1.8 Load Setup Defaults .................................................................... 55

5.1.9 Integrated Peripherals .................................................................. 55

5.1.10 Password Setting ....................................................................... 55

5.1.11 IDE HDD Auto Detection ........................................................ 55

5.1.12 Save & Exit Setup ...................................................................... 56

5.1.13 Exit Without Saving ................................................................... 56

Appendix A Programming the

Watchdog Timer......................................... 57

A.1 Programming the Watchdog Timer .................................................. 58

Appendix B Pin Assignments ....................... 61

B.1 VGA Display Connector (CN1) ......................................................... 62

B.2 COM1 and COM2 Serial Ports (CN2 and CN3) ............................ 62

B.3 Keyboard and Mouse Connnector (CN4) ........................................ 63

B.4 Ethernet RJ-45 Connectors (CN5 ~ 7) ............................................. 63

B.5 USB Connector (CN8) ....................................................................... 64

B.6 Floppy Drive Connector (CN10) ....................................................... 65

B.7 CompactFlash Socket (CN11) ........................................................... 66

B.8 IDE Connector (CN13) ....................................................................... 67

B.9 System I/O Ports ................................................................................. 68

B.10 DMA Channel Assignments ............................................................. 68

B.11 Interrupt Assignments ....................................................................... 69

B.12 J1 connector pin assignments ........................................................... 70

B.13 J2 connector pin assignments ........................................................... 71

B.14 J3 connector pin assignments ........................................................... 72

B.15 J4 connector pin assignments ........................................................... 73

Figures

Figure 1-1: MIC-3357 function block diagram .............................................................. 6

Figure 1-2: MIC-3357 Jumper Setting .......................................................................... 8

Figure 1-3: MIC-3357 connector and jumper locations .............................................. 11

Figure 1-4: MIC-3357 Front Panel Connector and Indicator Locations ..................... 12

Figure 1-5: Installing the card into the chassis ............................................................. 16

Figure 5-1: Setup program initial screen ..................................................................... 48

Figure 5-2: CMOS Setup Screen ................................................................................. 49

Figure 5-3: BIOS features setup screen ...................................................................... 49

Figure 5-4: Chipset features setup screen .................................................................. 53

Figure 5-5: Power management setup screen .............................................................. 53

Figure 5-6: PCI configuration screen .......................................................................... 54

Figure 5-7: Integrated peripherals ............................................................................... 55

Tables

Table 1-1: MIC-3357 jumper descriptions .................................................................... 7

Table 1-2: PVIO voltage setting (JP7) ........................................................................... 8

Table 1-3: Clear CMOS (JP9) ....................................................................................... 9

Table 1-4: CompactFlash Master/Slave Selection (JP10) .............................................. 9

Table 1-5: MIC-3357 connector descriptions ............................................................. 10

Table 2-1: MIC-3357 serial port default settings ........................................................ 18

Table B-1: MIC-3357 CRT display connector ............................................................ 62

Table B-2: MIC-3357 COM1 and COM2 serial ports ............................................... 62

Table B-3: MIC-3357 keyboard connector ................................................................. 63

Table B-4: MIC-3357 Ethernet RJ-45 connectors ...................................................... 63

Table B-5: MIC-3357 USB1 connector ....................................................................... 64

Table B-6: Floppy drive connector ............................................................................. 65

Table B-7: MIC-3357 CompactFlash socket .............................................................. 66

Table B-6: MIC-3357 IDE connector .......................................................................... 67

Table B-9: System I/O ports ....................................................................................... 68

Table B-10: DMA channel assignments ...................................................................... 68

Table B-11: Interrupt assignments .............................................................................. 69

Table B-12: J1 connector pin assignments .................................................................. 70

Table B-13: J2 connector pin assignments .................................................................. 71

Table B-14: J3 connector pin assignments .................................................................. 72

Table B-15: J4 connector pin assignments .................................................................. 73

Hardware

Configuration

CHAPTER

2MIC-3357 User's Manual

1.1 Introduction

The MIC-3357 is a 6U CompactPCI™ single board computer. With an

on-board Intel® Pentium® MMX 266 MHz CPU, the MIC-3357 can

operate under a wider operating temperature range. The MIC-3357 has

many functions within a merely single-slot width, thus saving valuable

CompactPCI™ slots for peripheral boards.

Low-Powered Mobile Pentium® Processor

The MIC-3357 uses an embedded Intel® Pentium® MMX 266 MHz

processor, which has low power consumption and an extended

temperature range. This CPU is designed for embedded application

and is suitable under fanless operation.

Complete I/O Functions

The MIC-3357 offers all the functions of an industrial computer with

the rugged Eurocard form factor. It offers a PCI VGA display, two serial

ports, one USB port, three auto-switchable fast Ethernet interfaces,

and one PS/2 keyboard/mouse connector. Standard connectors for all

the functions are available on the front and rear panels. The front

panel also has LEDs for power status, HDD operation and Ethernet

communication, as well as a reset button.

The built-in high speed PCI IDE controller provides one IDE channel

with Ultra DMA/33 mode. The User-defined J3 connector is designed

to support up to two IDE devices and two FDDs. These drives can

simply be connected to the backplane or to the rear transition board

for easy service and maintenance.

Meets Industrial Application Requirements

The MIC-3357 is designed for use in mission critical applications. It

accepts a CompactFlash™ memory card on the board or on the rear

transition board, to eliminate the need to use a fragile rotating hard

drive. To protect the system, a watchdog timer can automatically reset

the system if the system stops due to a program bug or EMI. The two-

layer front panel design complies with IEEE 1101.10. Connectors are

firmly screwed to the front panel, and the replaceable shielding gasket

is attached to the panel edge. This reduces emissions and gives better

protection against external interference.

Tabla de contenidos

Otros manuales de Computadora de placa única de Advantech

Advantech

Advantech PCM-9363 Manual de instalación y operación

Advantech

Advantech PCI-6873 Manual de instalación y operación

Advantech

Advantech PCE-3028 Manual de instalación y operación

Advantech

Advantech PCM-9591 Manual de instalación y operación

Advantech

Advantech PCA-6773 Manual de usuario

Advantech

Advantech MIO-5152 Manual de instalación y operación

Advantech

Advantech ROM-5720 Manual de usuario

Advantech

Advantech PCA-6012 Manual de instalación y operación

Advantech

Advantech RSB-3730 Manual de usuario

Advantech

Advantech RSB-3710 Manual de usuario

Advantech

Advantech ASMB-784 Manual de instalación y operación

Advantech

Advantech PCM-5862E Manual de usuario

Advantech

Advantech RSB-4710 Manual de usuario

Advantech

Advantech PCA-6135 Manual de instalación y operación

Advantech

Advantech PCA-6028 Manual de instalación y operación

Advantech

Advantech MIC-3399 Manual de usuario

Advantech

Advantech PCM-4380F-M0A2E Manual de usuario

Advantech

Advantech PCA-6005 Manual de usuario

Advantech

Advantech PCM-4822 Manual de usuario

Advantech

Advantech PCE-5127 Manual de instalación y operación

Advantech

Advantech MIO-5290L Manual de usuario

Advantech

Advantech ROM-5620 Manual de usuario

Advantech

Advantech PCM-9371 Manual de usuario

Advantech

Advantech PCM-9375 A3 Manual de instalación y operación

Manuales populares de Computadora de placa única de otras marcas

WIN Enterprises

WIN Enterprises PL-80910 Manual de usuario

AXIOMTEK

AXIOMTEK SBC81206 Series Manual de usuario

Embest

Embest SOM-PH8800 Manual de usuario

SeaLevel

SeaLevel SBC-R9 Manual de usuario

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manual de usuario

WinSystems

WinSystems PPM-LX800-G Manual de usuario

GIGAIPC

GIGAIPC QBiX-PPC Series Manual de usuario

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manual de usuario

Commell

Commell FS-978 Manual de usuario

GIGAIPC

GIGAIPC QBiP-8665A/ Manual de usuario

VersaLogic

VersaLogic Python EBX-11 Manual de usuario

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manual de usuario

CompuLab

CompuLab SB-A510 Manual de usuario

Boser

Boser HS-7321 Manual de usuario

Premier Farnell

Premier Farnell Embest SBC8530 Manual de usuario

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manual de usuario

Aaeon

Aaeon UP Manual de usuario

Portwell

Portwell WUX Series Manual de usuario