Advantech PCIE-1761H Manual de usuario

User Manual

PCIE-1761H

8-Channel Relay and 8-Channel

Isolated Digital Input PCI

Express Card

PCIE-1761H User Manual ii

The documentation and the software included with this product are copyrighted 2018

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to improve the products described in this manual at any time without notice. No part

of this manual may be reproduced, copied, translated, or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.The infor-

mation provided in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements

of the rights of third parties that may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants the original purchaser that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products that have been repaired or altered by

persons other than repair personnel authorized by Advantech, or products that have

been subject to misuse, abuse, accident, or improper installation. Advantech

assumes no liability under the terms of this warranty as a consequence of such

events.

Because of Advantech’s high quality-control standards and rigorous testing, most

customers never need to use our repair service. If an Advantech product is defective,

it will be repaired or replaced free of charge during the warranty period. For out-of-

warranty repairs, customers will be billed according to the cost of replacement mate-

rials, service time, and freight. Please consult your dealer for more details.

If you believe your product is defective, follow the steps outlined below.

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages received when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an return merchandize authori-

zation (RMA) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a completed Repair and Replacement

Order Card and a proof of purchase date (such as a photocopy of your sales

receipt) into a shippable container. Products returned without a proof of pur-

chase date are not eligible for warranty service.

5. Write the RMA number clearly on the outside of the package, then ship the

package prepaid to your dealer.

Part No. 2001176110 Edition 1

Printed in Taiwan September 2018

iii PCIE-1761H User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from damaged caused by electrostatic discharge (ESD)

or EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support to obtain the latest

product information.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before calling:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

Warnings, Cautions and Notes

Document Feedback

To assist us in improving this manual, we welcome all comments and constructive

criticism. Please send all feedback in writing to [email protected]m.

Warning! Warnings indicate conditions that if not observed can cause personal

injury!

Caution! Cautions are included to help avoid hardware damage or data losses.

For example,

“Batteries are at risk of exploding if incorrectly installed. Do not attempt

to recharge, force open, or heat the battery. Replace the battery only

with the same or equivalent type recommended by the manufacturer.

Discard used batteries according to the manufacturer's instructions.

Note! Notes provide additional optional information.

PCIE-1761H User Manual iv

Safety Instructions

1. Read these safety instructions carefully.

2. Retain this user manual for future reference.

3. Disconnect the equipment from all AC outlets before cleaning. Use only a damp

cloth for cleaning. Do not use liquid or spray detergents.

4. For pluggable equipment, the power outlet socket must be located near the

equipment and easily accessible.

5. Protect the equipment from humidity.

6. Place the equipment on a reliable surface during installation. Dropping or letting

the equipment fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. Do not cover the openings.

8. Ensure that the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord away from high-traffic areas. Do not place anything over

the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage from transient overvoltage.

12. Never pour liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following occurs, have the equipment checked by service person-

nel:

–The power cord or plug is damaged

–Liquid has penetrated the equipment

–The equipment has been exposed to moisture

–The equipment is malfunctioning or does not operate according to the user

manual

–The equipment has been dropped or damaged

–The equipment shows obvious signs of breakage

15. Do not leave the equipment in an environment where the storage temperature

fluctuates below -20 °C (-4 °F) or above 60 °C (140 °F) as this may cause dam-

age. The equipment should be kept in a controlled environment.

16. Batteries are at risk of exploding if incorrectly replaced. Replace only with the

same or an equivalent type as recommended by the manufacturer. Discard

used batteries according to the manufacturer’s instructions.

17. In accordance with the IEC 704-1:1982 standards, the sound pressure level at

the operator's position does not exceed 70 dB (A).

DISCLAIMER: These instructions are provided according to the IEC 704-1 standard.

Advantech disclaims all responsibility for the accuracy of any statements contained

herein.

v PCIE-1761H User Manual

Contents

Chapter 1 Overview...............................................1

1.1 Introduction ............................................................................................... 2

1.2 Features .................................................................................................... 2

1.3 Applications............................................................................................... 3

1.4 Installation Guide ...................................................................................... 3

1.5 Software Overview .................................................................................... 4

1.6 Accessories............................................................................................... 4

Chapter 2 Installation............................................5

2.1 Unpacking ................................................................................................. 6

2.2 Switch and Jumper Settings...................................................................... 6

Figure 2.1 Card Connector, Jumper, and Switch Locations ........ 6

Table 2.1: Summary of Jumper Settings ..................................... 6

Table 2.2: Board ID Settings (SW1) ............................................ 7

2.3 I/O Connectors .......................................................................................... 8

Figure 2.2 I/O Connector Pin Assignments ................................. 8

2.4 Device and Configuration.......................................................................... 9

Chapter 3 Signal Connections ..........................11

3.1 Overview ................................................................................................. 12

3.2 Isolated Digital Input Connections........................................................... 12

Figure 3.1 Isolated Digital Input Connections ............................ 12

3.3 Relay Connections .................................................................................. 12

Figure 3.2 Relay Output Connection ......................................... 12

Appendix A Specifications ....................................15

A.1 Isolated Digital Input................................................................................ 16

A.2 Digital Filter Time .................................................................................... 16

A.3 Relay Output ........................................................................................... 16

A.4 General Specifications ............................................................................ 17

Appendix B Block Diagram ...................................19

B.1 Block Diagram......................................................................................... 20

PCIE-1761H User Manual vi

Chapter 1

1Overview

PCIE-1761H User Manual 2

1.1 Introduction

Advantech’s PCIE-1761H is an 8-channel relay actuator and 8-channel isolated digi-

tal input card for PCIE bus. Built with 8 on-board SPDT relays, PCIE-1761H is ideal

for applications such as device ON/OFF control and power switching. Moreover, to

ensure easy monitoring, each relay is equipped with a red LED to show its ON/OFF

status.

The PCIE-1761H's 8 optically-isolated digital input channels are ideal for operation in

environments with noise or floating potentials. The following sections of this chapter

provide further information regarding the PCIE-1761H card features, installation pro-

cedures, software, and accessories.

1.2 Features

8 x relay output channels and 8 x isolated digital input channels

LED indicators that show activated relays

4 x Form A-type and 4 x Form C-type relay output channels

Output status read-back

Retains relay output values when hot system reset

High-voltage isolation on input channels (2500 VDC)

High ESD protection (2,000 VDC)

High over-voltage protection (70 VDC)

Wide input range (10 ~ 30 VDC)

Interrupt handling capability for IDI channels

Board ID

Advantech’s PCIE-1761H offers the following main features:

Robust Protection

The PCIE-1761H digital input channels feature robust isolation protection for indus-

trial, laboratory, and machinery automation applications. The card can durably with-

stand voltages of up to 2500 VDC, protecting the host system from incidental harm. If

connected to an external input source with surge protection, PCIE-1761H can offer

up to a maximum of 2,000 VDC ESD protection. Even with an input voltage of 70 VDC,

the PCIE-1761H card can operate properly, albeit only for short period of time.

Wide Input Voltage Range

PCIE-1761H features a wide input voltage range of 10 ~ 30 VDC, making it suitable

for most industrial applications that require a 12 VDC and 24 VDC input voltage.

Reset Protection Fulfills Requirement for Industrial Applications

When the system has undergone a hot reset (i.e., without turning off the system

power), the PCIE-1761H card can either retain the output values of each channel or

return to the open default configuration depending on its onboard jumper settings.

This function protects the system from malfunctioning during unexpected system

resets.

3 PCIE-1761H User Manual

Chapter 1 Overview

Plug-and-Play Functionality

PCIE-1761H is a plug-and-play device that complies with the PCIE specifications,

Rev. 2.0. During card installation, there is no need to set jumpers or DIP switches.

Instead, all bus-related configurations such as base I/O address and interrupt, are

automatically completed by the plug-and-play function.

Board ID

The PCIE-1761H has a built-in DIP switch that helps define each card's ID when mul-

tiple PCIE-1761H cards are installed on the same PC chassis. The board ID setting

function is very useful when users build their system with multiple PCIE-1761H cards.

With correct Board ID settings, users can easily identify and access each card during

hardware configuration and software programming.

1.3 Applications

Industrial On/Off control

Switch status sensing

Digital I/O control

Industrial and laboratory automation

SMT/PCB machinery

Semiconductor machinery

PC-based industrial machinery

Testing and measurements

Laboratory and education

External relay driving

1.4 Installation Guide

Before installing the PCIE-1761H card, please ensure you have the following neces-

sary components:

PCIE-1761H card

PCIE-1761H startup manual

Driver software - Advantech DAQNavi software (can be downloaded from the

Advantech product page)

Wiring cable - PCL-10137 (optional)

Wiring board - ADAM-3937 (optional)

PC or workstation with a PCI Express slot

Optional components for enhanced operation

–Advantech DAQ tools, LabView or other 3rd-party software

After ensuring all the components are present, including some of the accessories for

enhanced operation, you can begin the PCIE-1761H installation procedures.

PCIE-1761H User Manual 4

1.5 Software Overview

Advantech offers multiple DLL drivers, third-party driver support, and application soft-

ware to assist customers with fully exploiting the functions of the PCIE-1761H card:

Device drivers (an be downloaded from the Advantech product page)

LabVIEW driver

Advantech DAQNavi

Regarding programming options for DAQ cards, customers can use Advantech’s

application software, such as the Advantech DLL driver. Although not recommended

due to its laborious and time-consuming nature, advanced users are allowed another

option for register-level programming.

DLL Driver

Advantech’s DLL drivers software comes with all Advantech DAQ cards and can be

downloaded from the Advantech website free of charge. Additionally, the DLL driver

features a complete I/O function library for boosting application performance. The

Advantech DLL driver for Windows 7/8/10 functions seamlessly with multiple devel-

opment tools, including Visual C++, Visual Basic, and Visual Studio.Net

write code directly at the device register level. Because register-level programming

necessitates substantial time and effort, we recommend using Advantech’s DLL

driver software instead.

1.6 Accessories

Advantech offers a comprehensive range of accessories to support the PCIE-1761H

card. These accessories include the following:

Wiring Cable

The PCL-10137 shielded cable is especially designed to provide high resistance to

noise for PCIE-1761H cards. To achieve superior signal quality, the signal wires are

twisted to form a “twisted-pair cable”, reducing cross-talk and noise from other signal

sources. Furthermore, the analog and digital lines are separately sheathed and

shielded to neutralize EMI/EMC problems.

Wiring Boards

The ADAM-3937 is a 37-pin D-type wiring terminal module for DIN-rail mounting.

This terminal module can be connected to Advantech PC-Lab cards and allow easy

yet reliable access to individual pin connections for the PCIE-1761H card.



Tabla de contenidos

Otros manuales de Tarjeta PCI de Advantech

Advantech

Advantech PCIE-1805 Manual de usuario

Advantech

Advantech PCIE-1762H Manual de usuario

Advantech

Advantech PCIE-1754 Manual de usuario

Advantech

Advantech PCI-1706U Manual de usuario

Advantech

Advantech PCI-1711 Manual de usuario

Advantech

Advantech PCLS-848-P Manual de usuario

Advantech

Advantech PCI-1612B Manual del propietario

Advantech

Advantech PCI-1742U Manual de instalación y operación

Advantech

Advantech PCN-6351 Series Manual de usuario

Advantech

Advantech PCL-730 Manual de usuario

Advantech

Advantech PCIE-1884 Manual de instalación y operación

Advantech

Advantech MIC-3620 Manual de usuario

Advantech

Advantech EKI-6340 Series Manual de usuario

Advantech

Advantech PCIE-1760 Manual de usuario

Advantech

Advantech PCIE-1765 Manual de usuario

Advantech

Advantech PCIE-1752 Manual de usuario

Advantech

Advantech ECU-P1761 Manual de instalación y operación

Advantech

Advantech DVP-7612HE Manual de usuario

Advantech

Advantech PCIE-1753 Manual de usuario

Advantech

Advantech PCA-5610 Manual de instalación y operación

Advantech

Advantech PCI-1761 Manual de usuario

Advantech

Advantech MIC-3640 Manual de usuario

Advantech

Advantech PCLD-8811 Manual de instalación y operación

Advantech

Advantech PCI-1751 Manual de usuario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario