Advantech PCIE-1762H Manual de usuario

User Manual

PCIE-1762H

16-Channel Relay and 16-

Channel Isolated Digital Input

PCIe Card

PCIE-1762H User Manual ii

The documentation and the software included with this product are copyrighted 2018

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements to the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. The information provided in this manual is intended to be accurate and reliable.

However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements of the rights of third parties that may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants the original purchaser that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products that have been repaired or altered by

persons other than repair personnel authorized by Advantech, or that have been sub-

ject to misuse, abuse, accident, or improper installation. Advantech assumes no lia-

bility under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most

customers never need to use our repair service. If an Advantech product is defective,

it will be repaired or replaced free of charge during the warranty period. For out-of-

warranty repairs, customers will be billed according to the cost of replacement mate-

rials, service time, and freight. Please consult your dealer for more details.

If you believe your product is defective, follow the steps outlined below.

1. Collect all the information about the problem encountered (for example, CPU

speed, Advantech products used, other hardware and software used, etc.). Note

anything abnormal and list any onscreen messages displayed when the prob-

lem occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an return merchandize authori-

zation (RMA) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a completed Repair and Replacement

Order Card, and a proof of purchase date (such as a photocopy of your sales

receipt) into a shippable container. Products returned without a proof of pur-

chase date are not eligible for warranty service.

5. Write the RMA number clearly on the outside of the package. Then ship the

package prepaid to your dealer.

Part No. 2001176210 Edition 1

Printed in Taiwan October 2018

iii PCIE-1762H User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from damage due to electrostatic discharge (ESD) or EMI

leakage, we strongly recommend the use of CE-compliant industrial enclosure prod-

ucts.

Technical Support and Assistance

1. Visit the Advantech website at www.advantech.com/support to obtain the latest

product information.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before calling:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

Warnings, Cautions, and Notes

Warning! Warnings indicate conditions that if not observed can cause personal

injury!

Caution! Cautions are included to prevent hardware damage and data losses.

For example,

“Batteries are a risk of exploding if incorrectly installed. Do not attempt

to recharge, force open, or heat the battery. Replace the battery only

with the same or equivalent type recommended by the manufacturer.

Discard used batteries according to the manufacturer's instructions.”

Note! Notes provide additional optional information.

PCIE-1762H User Manual iv

Safety Instructions

1. Read these safety instructions carefully.

2. Retain this user manual for future reference.

3. Disconnect the equipment from all power outlets before cleaning. Use only a

damp cloth for cleaning. Do not use liquid or spray detergents.

4. For pluggable equipment, the power outlet socket must be located near the

equipment and easily accessible.

5. Protect the equipment from humidity.

6. Place the equipment on a reliable surface during installation. Dropping or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. Do not cover the openings.

8. Ensure that the voltage of the power source is correct before connecting the

equipment to a power outlet.

9. Position the power cord away from high-traffic areas. Do not place anything over

the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage from transient overvoltage.

12. Never pour liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following occurs, have the equipment checked by service person-

nel:

The power cord or plug is damaged

Liquid has penetrated the equipment

The equipment has been exposed to moisture

The equipment is malfunctioning or does not operate according to the user

manual.

The equipment has been dropped and damaged.

The equipment shows obvious signs of breakage.

15. Do not leave this equipment in an environment with a storage temperature of

below -20 °C (-4 °F) or above 60 °C (140 °F) as this may cause damage. The

equipment should be kept in a controlled environment.

16. CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer. Discard

used batteries according to the manufacturer’s instructions.

17. In accordance with IEC 704-1:1982 specifications, the sound pressure level at

the operator’s position does not exceed 70 dB (A).

DISCLAIMER: These instructions are provided according to IEC 704-1 standards.

Advantech disclaims all responsibility for the accuracy of any statements contained

herein.

v PCIE-1762H1762 User Manual

Contents

Chapter 1 Overview...............................................1

1.1 Introduction ............................................................................................... 2

1.2 Features .................................................................................................... 2

1.3 Applications............................................................................................... 3

1.4 Installation Guide ...................................................................................... 3

1.5 Software Overview .................................................................................... 3

1.6 Accessories............................................................................................... 4

Chapter 2 Installation............................................5

2.1 Unpacking ................................................................................................. 6

2.2 Switch and Jumper Settings...................................................................... 6

Figure 2.1 Card Connector, Jumper, and Switch Locations ........ 6

Table 2.1: Summary of Jumper Settings ..................................... 7

Table 2.2: Board ID Settings (SW1) ............................................ 7

Table 2.3: Jumper Settings for Relay .......................................... 8

2.3 I/O Connectors .......................................................................................... 9

Figure 2.2 I/O Connector Pin Assignments for PCIE-1762H ....... 9

Chapter 3 Signal Connections ...........................11

3.1 Overview ................................................................................................. 12

3.2 Isolated Digital Input Connections........................................................... 12

Figure 3.1 Isolated Digital Input Connections ............................ 12

3.3 Relay Connections .................................................................................. 13

Figure 3.2 Relay Output Connections........................................ 13

Appendix A Specifications ....................................15

A.1 Isolated Digital Inputs.............................................................................. 16

A.2 Digital Filter Time .................................................................................... 16

A.3 Relay Outputs ......................................................................................... 17

A.4 General Specifications ............................................................................ 17

Appendix B Block Diagram ...................................19

B.1 Block Diagram......................................................................................... 20

PCIE-1762H User Manual vi

Chapter 1

1Overview

PCIE-1762H User Manual 2

1.1 Introduction

Advantech’s PCIE-1762H is a 16-channel relay actuator and 16-channel isolated dig-

ital input card for PCI bus.

The 16 onboard SPDT relays are ideal for applications such as device ON/OFF con-

trol and power switching. For easy monitoring, each relay is equipped with a single

red LED that shows its ON/OFF status. Meanwhile, the 16 optically-isolated digital

input channels are ideal for digital input applications in environments with noise or

floating potentials.

This chapter provides detailed information about the PCIE-1762H DAS card features,

including a quick start installation guide and software and accessory information.

1.2 Features

16 relay output channels and 16 isolated digital input channels

LED indicators to show activated relays

Jumper-selectable Form A/Form B-type relay output channels

Output status read back

Retains relay output values after hot system reset

High-voltage isolation input channels (2,500 VDC)

High ESD protection (2,000 VDC)

High over-voltage protection (70 VDC)

Wide power input range (10 ~ 30 VDC)

Interrupt handling capability

High-density DB-62 connector

Board ID

Advantech PCIE-1762H card also offers the following main features:

Robust Protection

The PCIE-1762H’s digital input channels feature robust isolation protection for indus-

trial, laboratory, and machine automation applications. The card is compatible with

voltages of up to 2,500 VDC, protecting the host system from accidental damage. If

connected to an external input source with surge protection, PCIE-1762H can offer

up to a maximum of 2,000 VDC electrostatic discharge (ESD) protection. Even under

an input voltage of 70 VDC, the PCIE-1762H card will still function correctly, but only

for short period of time.

Wide Input Range

The PCIE-1762H supports a wide input voltage range of 10 to 50 VDC and is suitable

for most industrial applications with 12 VDC, 24 VDC, and 48 VDC input voltage.

Board ID

The PCIE-1762H features a built-in DIP switch for defining the ID of each card. This

is particularly useful for when multiple PCIE-1762H cards are installed on the same

PC chassis. With the Board ID function, users can easily identify and access each

card during hardware configuration and software programming operations.

3 PCIE-1762H User Manual

Chapter 1 Overview

Reset Protection for Industrial Applications

When the system has undergone a hot reset, the PCIE-1762H card can either retain

the output values for each channel or return to the default open configuration

depending on the on-board jumper settings. This protects the system from malfunc-

tioning during unexpected system resets.

Plug-and-Play Function

The PCIE-1762H is a plug-and-play device that fully complies with the PCI Specifica-

tion, Rev 2.2. During card installation, there is no need to set jumpers or DIP

switches. Instead, all bus-related settings, such as base I/O address and interrupt

function, are automatically configured by the plug-and-play technology.

1.3 Applications

Industrial On/Off control

Switch status sensing

Digital I/O control

Industrial and laboratory automation

SMT/PCB machinery

Semi-conductor machinery

PC-based industrial machinery

Testing and measurement

Laboratory and education

External relay driving

1.4 Installation Guide

Before installing the PCIE-1762H card, please ensure that you have the following

necessary components:

PCIE-1762H card

PCIE-1762H startup manual

Driver software - Advantech DLL drivers (included in the companion CD-ROM)

Wiring cable - PCL-10162 (optional)

Wiring board - ADAM-3962 (optional)

PC or workstation with a PCI Express slot

Application software - DAQ Navi, LabView or other third-party software

After confirming that you have all the necessary components and any accessories for

enhanced operation, you can begin the PCIE-1762H card installation prodecures.

1.5 Software Overview

Advantech offers multiple DLL drivers, third-party driver support, and application soft-

ware to help customers maximize the performance of the PCIE-1762H card.

Device drivers (can be downloaded from the Advantech product page)

LabVIEW driver

Advantech DAQNavi

PCIE-1762H User Manual 4

Programming DAQ Cards

Advantech’s application software, such as the Advantech device drivers, can be used

with the PCIE-1762H card. Advanced users can also conduct registry-level program-

ming, although this is not recommended due to its laborious and time-consuming

nature.

DAQNavi Software

Advantech DAQNavi software includes device drivers and a software development

kit (SDK) that features a comprehensive I/O function library to enhance application

performance. This software comes with all Advantech DAC cards and can be down-

loaded free of charge from the Advantech website. Advantech DAQNavi software for

Windows 7/8/10 (desktop mode) works seamlessly with development tools such as

Visual Studio .Net, Visual C++, Visual Basic, and Borland Delphi.

1.6 Accessories

Advantech offers a complete set of accessories for PCIE-1762H cards. These acces-

sories include

Wiring Cable

The PCL-10162 shielded cable is designed for PCIE-1762H cards to provide high

noise resistance. To enhance signal quality, the signal wires are twisted into a

“twisted-pair cable”, reducing cross-talk and noise from other signal sources. Further-

more, the analog and digital lines are separately sheathed and shielded to avoid EMI/

EMC problems. Advantech provides 1 m, 3 m, and 5 m cables to satisfy various

usage requirements.

Wiring Board

The ADAM-3962 is a D-Sub 62-pin wiring terminal module for DIN-rail mounting. This

terminal module can be connected to PCIE-1762H cards for reliable access to indi-

vidual pin connections.



Otros manuales para PCIE-1762H

Tabla de contenidos

Otros manuales de Tarjeta PCI de Advantech

Advantech

Advantech PCI-1750 Manual de usuario

Advantech

Advantech PCI-1602UP Manual de usuario

Advantech

Advantech PCI-1780 Manual de usuario

Advantech

Advantech PCI-1751 Manual de usuario

Advantech

Advantech B+B SmartWorx McPC/Giga-MediaLinX Manual de usuario

Advantech

Advantech PCI-1713U Manual de usuario

Advantech

Advantech ARK-5261 Manual de instalación y operación

Advantech

Advantech PCM-3614I Manual de instalación y operación

Advantech

Advantech PCI-1714 Manual de usuario

Advantech

Advantech DVP-7020A Manual de usuario

Advantech

Advantech PCI-1680U Manual de usuario

Advantech

Advantech PCI-1612B Manual del propietario

Advantech

Advantech UNO-P166 Manual de instalación y operación

Advantech

Advantech PCI-1718 Series Manual de usuario

Advantech

Advantech PCI-1752 Manual de usuario

Advantech

Advantech PCI-1737U Manual de instalación y operación

Advantech

Advantech DVP-7612HE Manual de usuario

Advantech

Advantech DSPC-8661-PCXE Manual de usuario

Advantech

Advantech PCI-1671UP Manual de instalación y operación

Advantech

Advantech PCLS-848-P Manual de usuario

Advantech

Advantech PCI-1713 Manual de usuario

Advantech

Advantech DVP-7020BE Manual de usuario

Advantech

Advantech PCE-3132 Manual de instalación y operación

Advantech

Advantech MIC-3620 Manual de usuario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario