Advantech ROM-DB7502 Manual de usuario

User Manual

ROM-DB7502

Development Board for Qseven

2.0/2.1 modules

ROM-DB7502 User Manual ii

The documentation and the software included with this product are copyrighted 2017

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2006750200 Edition 1

Printed in China February 2018

iii ROM-DB7502 User Manual

Declaration of Conformity

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Ordering Information

Packing List

Before installation, please ensure the following items have been shipped.

Part No. Description

ROM-DB7502-SCA1E ROM-DB7502 Qseven 2.0/2.1 Carrier Board

ROM-7510CD-PEA1E ROM-7510 Q7 TI AM5728DC 1.5GHz 0~60°C

ROM-7510WD-PEA1E ROM-7510 Q7 TI AM5728 1.5GHz -40~85°C

ROM-DK7510-F0A1E ROM-7510 Qseven 2.0 Development Kit

Part No. Description

96967502001 Qseven 2.0/2.1 Carrier Board Assembly

9696ED2000E debug adapter board

1700022373-01 Debug port cable

1700002204 USB pin header to USB Type A

1700004711-11 SATA signal cable

1700021941-01 SATA power cable

ROM-DB7502 User Manual iv

Optional Accessories

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to

the user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Part No. Description

96PSA-A36W12R1 ADAPTER 100-240V 36W 12V 3A

1700001524 Power Cord 3P UL 10A 125V 180cm

170203183C Power Code 3P Europe (WS-010+WS-083)183cm

170203180A Power Cord 3P UK 2.5A/3A 250V 1.83M

SQF-ISDS1-4G-82C SQF SDHC C10 SLC 4G, 1CH (0~70°C)

SQF-ISDS1-8G-82C SQF SDHC C10 SLC 8G, 1CH (0~70°C)

SQF-ISDS1-8G-82E SQF SDHC C10 SLC 8G, 1CH (-40~85°C)

Y5AGF16002 WiFi/BT module AW-CB178NF-S

968AD00039 Quectel 4G module EC20-CEFA kit w/antenna

v ROM-DB7502 User Manual

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other

cards while the PC is on.

Disconnect power before making any configuration changes. The sudden rush

of power as you connect a jumper or install a card may damage sensitive elec-

tronic components.

ROM-DB7502 User Manual vi

vii ROM-DB7502 User Manual

Contents

Chapter 1 General Introduction ...........................1

1.1 Introduction ............................................................................................... 2

1.2 Product Features....................................................................................... 2

1.3 Block Diagram........................................................................................... 3

1.4 Reference document................................................................................. 3

1.4.1 Qseven standard SPEC................................................................ 3

1.4.2 ROM-DB7502 information............................................................. 3

Chapter 2 H/W Installation....................................5

2.1 Module Form Factor.................................................................................. 6

2.2 Environmental Specifications .................................................................... 6

2.3 ROM-DB7501 Overview............................................................................ 7

2.4 Connector, Jumper setting, Switch and LED ............................................ 8

2.4.1 Rear I/O panel............................................................................... 8

Table 2.1: Table 2.1: External IO Connector ............................... 8

2.4.2 Internal I/O .................................................................................. 18

Table 2.2: SW/Jumper list ......................................................... 18

Table 2.3: Connector list............................................................ 21

2.5 Hardware installation............................................................................... 42

Chapter 3 Advantech Service ............................43

3.1 RISC Design-in Services......................................................................... 44

3.2 Contact Information................................................................................. 47

3.3 Global Service Policy .............................................................................. 48

3.3.1 Warranty Policy........................................................................... 48

3.3.2 Repair Process ........................................................................... 49

ROM-DB7502 User Manual viii

Chapter 1

1General Introduction

This chapter gives background

information on the ROM-DB7502.

Sections include:

Introduction

Specification

ROM-DB7502 User Manual 2

1.1 Introduction

ROM-DB7501 is an evaluation carrier board designed for Advantech Qseven mod-

ules. It is compatible with ROM-7510 and has rich I/O interface for evaluation and

development. It supports wide range operating temperatures, 2 power input inter-

faces (one of them is designed for lithium-ion battery). ROM-DB7502 is an ideal

development board for mobile applications, such as portable device, industrial tablet

or HMI systems.

ROM-DB7502 comes with RISC Qseven carrier board design documents: Carrier

board design guide, layout, schematic checklist, and also the reference board sche-

matics ready for you to start your own carrier board design.

1.2 Product Features

Compatible Module Qseven2.0/2.1

Graphic LVDS 1 Dual 24-bit LVDS

HDMI 1 HDMI TypeA

Ethernet Speed 1 RJ45

Storage SD 1SD card slot

SATA 1SATAII Connector

I/O

USB 2 USB 3.0 Type A (Host), 1 min USB Type A (OTG),

2 USB 2.0 Pin header

Serial 1 by DB9

Audio 1 1/8 Audio Jack (I2S HD Audio), 1 SPDIF Pin header

CAN 1 CAN 2.0B ports, Differential mode +5V

GPIO 8 GPIO Ports by DB9

I2C 1 I2C pin header

SPI 1 SPI pin header

Expansion

PCIe slot 1 PCIe x4

M.2 slot E-Key, SDIO/UART/I2C single

Mini-PCIE USB single only

SIM slot 1

Power input power 2 Power Inputs (+12V DC-Jack, Lithium-ion battery)

Environment

Operational

Temperature 0 ~ 60 °C

Operating

Humidity 0% ~ 90% relative humidity, non-condensing

Dimensions W x L x T 170 x 170mm x 1.6mm

Certifications Level CE / FCC Class B

Tabla de contenidos

Otros manuales de Placa madre de Advantech

Advantech

Advantech MIO-2262 Manual de usuario

Advantech

Advantech AIMB-341 Manual de usuario

Advantech

Advantech PCM-4153-A2 Manual de instalación y operación

Advantech

Advantech AKMB-G41M Manual de usuario

Advantech

Advantech PCM-9377 Manual de usuario

Advantech

Advantech PCI-6870 Series Manual de usuario

Advantech

Advantech RSB-4410 Manual de usuario

Advantech

Advantech AIMB-707 Manual de instalación y operación

Advantech

Advantech RSB-6410 Manual de usuario

Advantech

Advantech AIMB-210 Manual de instalación y operación

Advantech

Advantech AIMB-564 Manual de usuario

Advantech

Advantech PCM-9579 Manual de instalación y operación

Advantech

Advantech AIMB-763 Manual de usuario

Advantech

Advantech PCA-6743 Manual de usuario

Advantech

Advantech PCM-3362 Manual de instalación y operación

Advantech

Advantech AIMB-262 Manual de usuario

Advantech

Advantech ASR-1000K-00A1E Manual de instalación y operación

Advantech

Advantech PCE-5126 Manual de usuario

Advantech

Advantech PCA-6751 Series Manual de usuario

Advantech

Advantech PCA-6009 Manual de usuario

Advantech

Advantech AIMB-705 Manual de usuario

Advantech

Advantech AIMB-760 Manual de usuario

Advantech

Advantech PCA-6741 Manual de instalación y operación

Advantech

Advantech PCM-3362Z Manual de instalación y operación

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario