Advantech MIC-3358 Manual de usuario

MIC-3358

6U CompactPCI Intel®

Pentium®4 Processor - M

Single Board Computer with

VGA / Dual Giga LAN / PMC

User’s Manual

MIC-3358 User’s Manual ii

This document is copyrighted, 2003. All rights are reserved. The original

manufacturer reserves the right to make improvements to the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of the original manu-

facturer. Information provided in this manual is intended to be accurate

and reliable. However, the original manufacturer assumes no responsibil-

ity for its use, nor for any infringements upon the rights of third parties

which may result from its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

IBM, PS/2, OS/2, and VGA are trademarks of International Business

Machines Corporation.

Intel® and Pentium® are trademarks of Intel Corporation.

Windows is a registered trademark of Microsoft Corporation.

NetWare is a trademark of Novell, Inc.

PICMG™, CompactPCI™ and the PICMG™, and CompactPCI™ logos

are trademarks of the PCI Industrial Computers Manufacturers Group.

All other product names or trademarks are properties of their respective

owners.

Technical Support and Sales Assistance

If you have any technical questions about the MIC-3358 or any other

Advantech products, please visit our support website at:

http://support.advantech.com.tw

For more information about Advantech's products and sales information,

please visit:

http://www.advantech.com.

Part No.2002335800 1st Edition

Printed in Taiwan June. 2003

iii

CE Notification

The MIC-3358, developed by Advantech CO., LTD., has passed the CE

test for environment specification when shielded cables are used for

external wiring. We recommend the use of shielded cables.

Product warranty

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for one year

from the date of purchase. This warranty does not apply to any products

which have been repaired or altered by persons other than repair person-

nel authorized by Advantech, or which have been subject to misuse,

abuse, accident or improper installation. Advantech assumes no liability

under the terms of this warranty as a consequence of such events.

Because of Advantech's high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For exam-

ple, CPU speed, Advantech products used, other hardware and software

used, etc.) Note anything abnormal and list any on-screen messages you

get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual,

product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return mer-

chandize authorization) number from your dealer. This allows us to pro-

cess your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date (such as

your sales receipt) in a shippable container. A product returned without

proof of the purchase date is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship

it prepaid to your dealer.

MIC-3358 User’s Manual iv

Packing List

Before installing your board, ensure that the following materials have

been received:

• 1 MIC-3358 all-in-one single board computer

• 1 Utility CD-ROM disc

• 1 CPU Heat sink (Assembled)

• 1 CPU thermal dissipation paste

• 1 Thermal pad (Assembled)

• 1 RJ-45 to RS-232 COM port adaptor

• 1 Hard drive isolation pad (Assembled)

• 1 Hard drive bracket (Assembled)

• 1 Solder-side cover (Assembled)

• Several screws

• 1 warranty certificate document

If any of these items are missing or damaged, contact your distributor or

sales representative immediately.

Warning! Any changes or modifications made to the

equipment which are not expressly approved by

the relevant standards authority could void your

authority to operate the equipment.

Contents

Chapter 1 Hardware Configuration .................................2

1.1 Introduction ....................................................................... 2

1.2 Specifications .................................................................... 3

1.3 Functional Block Diagram ................................................ 6

Figure 1.1:MIC-3358 functional block diagram............. 6

1.4 Jumpers.............................................................................. 6

1.4.1 Jumper Locations............................................................ 6

Table 1.1:MIC-3358 jumper descriptions....................... 6

Table 1.2:JP1 jumper definition (PMC Module Voltage

V(i/o))7

Table 1.3:JP2 jumper definitions (PMC Module Voltage

Vio)7

Table 1.4:JP7 jumper definitions (CompactFlash™ card)

1.4.2 Clear CMOS (JP4) .......................................................... 7

Table 1.5:Clear CMOS JP4 ............................................ 8

1.5 Connectors......................................................................... 8

Table 1.6:MIC-3358 connector descriptions .................. 8

Table 1.7:CN1 IDE Connector Definitions .................... 9

Table 1.8:CN2 CompactFlash™ Socket Definitions.... 10

Table 1.9:CN3 RJ-45 COM1 port Definitions.............. 11

Table 1.10:CN4 Handle Switch Definitions................. 12

Figure 1.2:Handle Switch Definitions .......................... 12

Table 1.11:CN5 USB 1.1/2.0 port Definitions ............. 13

Table 1.12:CN6 USB 1.1/2.0 port Definitions ............. 13

Table 1.13:CN9 DB-15 VGA Connector Definitions .. 14

Table 1.14:PU1 Gigabit LAN Connector Definitions .. 14

Table 1.15:J11/J12/J14 PMC Connector Definitions .. 15

Table 1.16:D9 LED Definitions.................................... 18

Table 1.17:SW1 Vcore selection definitions ................ 18

Table 1.18:SW2 Drone mode definitions ..................... 19

Figure 1.3:MIC-3358 jumper and connector locations. 20

Figure 1.4:MIC-3358 front panel connector and indicator

locations21

1.6 Safety Precautions ........................................................... 21

1.7 Installing CPU and Heat Sink ........................................ 22

Figure 1.5:Complete assembly with heat sink and hard

disk 23

1.8 Software support ............................................................. 23

Chapter 2 Connecting Peripherals .................................26

2.1 IDE Device (CN1 and Rear I/O)..................................... 26

MIC-3369 User’s Manual vi

2.2 VGA Display Connector (CN9 or Rear I/O)................... 26

2.3 PS/2 Keyboard and Mouse Connector (Rear I/O)........... 26

2.4 Serial Ports (CN3 and Rear I/O) ..................................... 27

Table 2.1:MIC-3358 serial port default settings........... 27

2.5 Ethernet Configuration (PU1 , Rear I/O and J3)............. 27

2.6 USB Connector (CN5/6 and Rear I/O) ........................... 28

2.7 PMC Connector (J11, J12, J14) ...................................... 28

2.8 CompactFlash™ Socket (CN2)....................................... 28

2.9 Card Installation .............................................................. 28

Chapter 3 ..........................................................................32

3.1 Overview ......................................................................... 32

3.2 USB driver....................................................................... 32

3.3 CMM (Chassis Management Module) Driver ................ 33

3.3.1 Windows 2K Driver...................................................... 33

Figure 3.1:Right Click "My Computer" and click "Prop-

erties"33

Figure 3.2:Tab "Hardware" and click "Hardware Wizard"

Figure 3.3:click "Next" in Hardware Wizard ............... 34

Figure 3.4:click" Add/Troubleshoot a device" ............. 34

Figure 3.5:select " Add a new device" in Device windows

Figure 3.6:click "No, I want to select the hardware from a

list" 35

Figure 3.7:Select "Other devices" in Hardware types win-

dows36

Figure 3.8:Tab " Have Disk" in right bottom ............... 36

Figure 3.9:Browse proper driver in CD ROM device .. 37

Figure 3.10:click ok in the Wizard windows................ 37

Figure 3.11:click "ok" in Add New Hardware Wizard

Properties" windows38

Figure 3.12:click "yes" in Creating a Forced Configura-

tion windows38

Figure 3.13:click "Next" in Add/Remove Hardware Wiz-

ard windows39

Figure 3.14:Tab "Finish" in Add/Remove Hardware Wiz-

ard windows39

Figure 3.15:click "Yes" to restart your computer ......... 40

Figure 3.16:Go to Device Manager to see available A-

IPM drivers40

3.3.2 Windows XP Driver...................................................... 41

Figure 3.17:Right click My Computer to select "Proper-

ties"41

Figure 3.18:Tab "Hardware" and click "Add Hardware

vii

Wizard"41

Figure 3.19:Click "Next" in the windows..................... 42

Figure 3.20:Click "Yes , I have already connected the

hardware"42

Figure 3.21:Select "Add a new hardware device" in the

installed hardware window43

Figure 3.22:Click Install the hardware that I manually se-

lect from a list (Advanced)43

Figure 3.23:Select "Show all devices" in Common hard-

ware types windows44

Figure 3.24:tab "Have Disk"......................................... 44

Figure 3.25:Select proper driver in CD-ROM .............. 45

Figure 3.26:tab A-IPM driver and click "Have Disk" .. 45

Figure 3.27:Click " Next" ............................................. 46

Figure 3.28:Click "Finish"............................................ 46

Figure 3.29:Go to My computer to see "A-IPM drivers" .

Chapter 4 Award BIOS Setup.........................................50

4.1 AWARD BIOS Setup...................................................... 50

Figure 4.1:Setup program initial screen........................ 50

4.1.1 Entering Setup............................................................... 50

4.1.2 Standard CMOS Setup.................................................. 51

Figure 4.2:Standard CMOS setup screen...................... 51

4.1.3 Advance BIOS Features Setup ..................................... 51

Figure 4.3:Advance BIOS features setup screen .......... 52

4.1.4 Advance Chipset Features Setup .................................. 55

Figure 4.4:Advance Chipset features setup screen ....... 55

4.1.5 Integrated Peripherals ................................................... 57

Figure 4.5:Integrated Peripherals setup screen ............. 57

4.1.6 Power Management Setup ............................................ 60

Figure 4.6:Power management setup screen................. 60

4.1.7 PNP/PCI Configuration Setup ...................................... 61

Figure 4.7:PNP/PCI configuration screen .................... 61

4.1.8 PC Health Status ........................................................... 62

Figure 4.8:PC Health setup screen................................ 62

4.1.9 Load Optimized Defaults.............................................. 62

4.1.10 Set Password ................................................................. 63

4.1.11 Save & Exit Setup......................................................... 63

4.1.12 Exit Without Saving...................................................... 63

Appendix A ..........................................................................66

A.1 Programming the Watchdog Timer................................. 66

Appendix B Pin Assignments .............................................70

B.1 J1 Connector.................................................................... 70

Table B.1:J1 connector ................................................. 70

MIC-3369 User’s Manual viii

B.2 J2 Connector.................................................................... 71

Table B.2:J2 connector ................................................. 71

B.3 J3 Connector.................................................................... 72

Table B.3:J3 connector ................................................. 72

B.4 J5 Connector.................................................................... 73

Table B.4:J5 connector ................................................. 73

B.5 System I/O Ports.............................................................. 74

Table B.5:System I/O ports .......................................... 74

B.6 Interrupt Assignments ..................................................... 75

Table B.6:Interrupt assignments ................................... 75

B.7 1st MB Memory Map...................................................... 75

Table B.7:1st MB memory map ................................... 75

CHAPTER

Hardware

Configuration

MIC-3358 User’s Manual 2

Chapter 1 Hardware Configuration

1.1 Introduction

The MIC-3358 is a CompactPCI® server blade with Intel® Pentium® 4

Processor-M on board to compliant with Compact Packet Switching

Backplane (cPSB) systems. Supporting the PICMG 2.16 specification,

the MIC-3358 delivers a cost performance platform for those applications

that demand high performance. It is an ideal platform for emerging appli-

cation such as switch-fabric blade server, mission critical and computing

intensive applications.

The new MIC-3358 has been optimized for the Intel® Pentium® 4 Pro-

cessor-M and Intel® 845E Chipset. It unveils as a high performance

cPCI platforms, delivering compelling system bus speed performance

across the 400 MHz with Intel NetBurst™ Micro-Architecture, Its inno-

vated wider data paths and flexible memory refresh technology optimize

the DDR SDRAM performance in MIC-3358.

High Performance Intel® Pentium® 4 Processor -M

The MIC-3358 supports Intel® Pentium® 4 processor-M 1.7GHz and

2.2GHz , with u-FCPGA package. The Intel® Pentium®4 processor-M

has on-chip 512KB L2 cache providing high performance. With the sup-

port of a 400MHz front side bus, the MIC-3358 can fulfill customer’s

expectations of price-performance computing capability.

Compact Mechanical Design

The MIC-3358 has many functions on a single board with only one-slot

width. Advantech provides a CPU heat sink specially designed for the

Intel® Pentium®4 processor -M, enabling the MIC-3358 to operate with-

out a cooling fan on the heat sink. It only needs external cooling air from

the chassis fans for ventilation. This enables the MIC-3358 to use Intel®

Pentium®4 processor - M within a mere 1-slot wide space.

Single P2P Bridge

The MIC-3358 with single PCI-to-PCI Bridge is applicable up to 8-slot

enclosure and drive up to seven bus master PCI slots in master mode. Fur-

thermore, it supports master and drone modes. The MIC-3358 can also

operate in drone mode in a peripheral slot, whereby it functions as a

stand-alone computer and does not communicate on the CompactPCI®

bus.

Tabla de contenidos

Otros manuales de Placa madre de Advantech

Advantech

Advantech AIMB-U217 Manual de usuario

Advantech

Advantech PCM-4825 Manual de usuario

Advantech

Advantech AIMB-567 Manual de usuario

Advantech

Advantech PCM-9570/S Manual de usuario

Advantech

Advantech MIC-3396 Manual de usuario

Advantech

Advantech SIMB-M22 Manual de usuario

Advantech

Advantech MIC-3389 Manual de usuario

Advantech

Advantech AIMB-U117 Manual de usuario

Advantech

Advantech PPC-MB-8260AE Manual de instalación y operación

Advantech

Advantech AIMB-760 Manual de usuario

Advantech

Advantech IPC-5122 Manual de usuario

Advantech

Advantech PCI-6880 Manual de usuario

Advantech

Advantech PCM-9570 Manual de instalación y operación

Advantech

Advantech AIMB-210 Manual de usuario

Advantech

Advantech AIMB-210 Manual de instalación y operación

Advantech

Advantech PCI-6886F-M0A1 Manual de usuario

Advantech

Advantech AIMB-707 Manual de instalación y operación

Advantech

Advantech PCM-3362 Manual de instalación y operación

Advantech

Advantech AIMB-580 Manual de usuario

Advantech

Advantech ASMB-805 Series Manual de usuario

Advantech

Advantech PPC-MB-620 Manual de instalación y operación

Advantech

Advantech PCA-6168 Manual de usuario

Advantech

Advantech PCM-3341 Series Manual de usuario

Advantech

Advantech PCA-6781 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario