Advantech AIIS-E730 Manual de instalación y operación

1 Startup Manual

Packing List

Before installation, please make sure that you have received

the following:

• AIIS-E730 card

• Quick Start User Manual

If anything is missing or damaged, contact your distributor or

sales representative immediately.

Specications

Isolated Digital Input

Number of Channel 16 (bi-directional)

Optical Isolation 2,500 VDC

Opto-isolator response time 25 μs

Over-voltage Protect 70 VDC

Input Voltage

VIH (max.) 30 VDC

VIH (min.) 3 VDC

VIL (max.) 1 VDC

Input Current

3 VDC 0.5 mA (typical)

12 VDC 3.1 mA (typical)

24 VDC 6.6 mA (typical)

30 VDC 9.73 mA (typical)

Declaration of Conformity

FCC Class A

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause interference in which case the user is

required to correct interference at his own expense.

This product has passed the CE test for environmental

specifications when shielded cables are used for external

wiring. We recommend the use of shielded cables. This kind

of cable is available from Advantech. Please contact your

local supplier for ordering information.

Notes

For more information on this and other Advantech products,

please visit our websites at:

http://www.advantech.com

For technical support and service:

http://www.advantech.com/support/

This startup manual is for AIIS-E730.

Part No: 2003F73000 1st Edition

January 2016

STARTUP MANUAL

Overview

AIIS-E730

32-channel Isolated Digital I/O Card

The AIIS-E730 offers isolated digital input channels as well

as isolated digital output channels with isolation protec-

tion up to 2,500 VDC, which makes them ideal for industrial

applications where high-voltage isolation is required. The

AIIS-E730 also features a Digital filter on each channel.

General

I/O Connector Type 37-pin box header

Dimensions 96 mm x 102 mm (3.8” x 4.0”)

Power Consumption

Typical +3.3 V @ 265 mA

+12 V @ 40 mA

Max +3.3 V @ 475 mA

+12 V @ 75 mA

Temperature

Operation 0 ~ 50°C (32~ 122 °F )

(refer to IEC 68 -2 - 1 ,2)

Storage -20 ~ +70°C (-4 ~158°F)

Relative Humidity 5 ~ 95% RH non-condensing

(refer to IEC 60068-2-3)

Certication CE/FCC

Digital Output

Number of Channels 16

Optical Isolation 2,500 VDC

Output Voltage Open collector 5 to 40 VDC

Sink/Source Current 500 mA max./channel

Startup Manual 2

STARTUP MANUAL

PIN Assignments

Specications

Digital Filter Time

Digital Filter Time[sec.] = 2n / (8 x 106) n: = setting data(0 - 20)

Setting Data (n) Digital Filter

Time Setting Data (n) Digital Filter

Time

0 (00h) The filter function is

not used. 7 (07h) 16μsec 14 (0Eh) 2.048msec

1 (01h) 0.25μsec 8 (08h) 32μsec 15 (0Fh) 4.096msec

2 (02h) 0.5μsec 9 (09h) 64μsec 16 (10h) 8.192msec

3 (03h) 1μsec 10 (0Ah) 128μsec 17 (11h) 16.384msec

4 (04h) 2μsec 11 (0Bh) 256μsec 18 (12h) 32.768msec

5 (05h) 4μsec 12 (0Ch) 512μsec 19 (13h) 65.536msec

6 (06h) 8μsec 13 (0Dh) 1.024msec 20 (14h) 131.072msec

Description of pin use:

IDIn (n=0 ~ 15): Isolated digital input

IDOn (n=0 ~ 15): Isolated digital output

ECOM: External common Vcc/GND of IDI

PCOM: Free wheeling common diode for IDO

EGND: External ground for IDO

Startup Manual 3

Connections

Isolated Digital Input

Each of the 16 isolated digital input channels accept

voltage from 3 to 30 V for logic high, and 0 to 1 V for logic

low. All input channels share one external common. The

following figure shows how to connect an external input

source to the card's isolated inputs.

Isolated Digital Output

The AIIS-E730 provides 16 isolated DO channels. If the

external voltage (5 ~ 40V) is connected to each isolated

output channel (IDO) and its isolated digital output turns

on (500 mA per channel maximum), the card's current will

sink from the external voltage.

Otros manuales de Sistema de E/S de Advantech

Advantech

Advantech ADAM-6050W Manual de usuario

Advantech

Advantech AIIS-1750 Manual de instalación y operación

Advantech

Advantech USB-5801 Manual de usuario

Advantech

Advantech ADAM-5000/TCP Series Manual de usuario

Advantech

Advantech PCI-1727U Manual de usuario

Advantech

Advantech AMAX-5000 Series Manual de usuario

Advantech

Advantech WISE-5000 Series Manual de usuario

Advantech

Advantech ADAM-3600-A1F Manual de usuario

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Advantech

Advantech PCI-1758UDO Manual de instalación y operación

Advantech

Advantech 48/24-Channel Digital Input/Output USB Module... Manual de usuario

Advantech

Advantech ADAM-3013 Manual de usuario

Advantech

Advantech PCIE-1762H Manual de usuario

Advantech

Advantech ADAM-6000 series Manual de usuario

Advantech

Advantech PCM-3753I-AE Manual de usuario

Advantech

Advantech MIC-75G20 Manual de instalación y operación

Advantech

Advantech PCI-1750SO Manual de usuario

Advantech

Advantech WISE-4671 Manual de usuario

Advantech

Advantech ADAM-6251 Manual de instalación y operación

Advantech

Advantech USB-4716 Manual de usuario

Advantech

Advantech ADAM-5013 Manual de usuario

Advantech

Advantech ADAM-6300 Series Manual de usuario

Advantech

Advantech WISE-4000 Series Manual de usuario

Advantech

Advantech PCI-1750 Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario