Advantech ADAM-6100EI Series Manual de usuario

User Manual

ADAM-6100EI Series

EtherNet/IP I/O Modules

ADAM-6100EI Series User Manual ii

The documentation and the software included with this product are copyrighted 2009

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2003610000 Edition 1

Printed in Taiwan April 2012

iii ADAM-6100EI Series User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables. This

kind of cable is available from Advantech. Please contact your local supplier for

ordering information.

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (OS, version, application software, etc.)

–A complete description of the problem

–The exact wording of any error messages

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other

cards while the PC is on.

Disconnect power before making any configuration changes. The sudden rush of

power as you connect a jumper or install a card may damage sensitive electronic

components.

ADAM-6100EI Series User Manual iv

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

15. The power cord or plug is damaged.

16. Liquid has penetrated into the equipment.

17. The equipment has been exposed to moisture.

18. The equipment does not work well, or you cannot get it to work according to the

user's manual.

19. The equipment has been dropped and damaged.

20. The equipment has obvious signs of breakage.

21. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

22. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

23. The sound pressure level at the operator's position according to IEC 704-1:1982

is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

v ADAM-6100EI Series User Manual

Chapter 1 Overview...............................................1

1.1 Introduction ............................................................................................... 2

1.2 System Architecture .................................................................................. 2

Figure 1.1 ADAM-6100EI Daisy Chain Connections ................... 2

1.3 Features .................................................................................................... 3

1.3.1 Daisy Chain Connection ............................................................... 3

1.3.2 2,500V Isolation Protection ........................................................... 4

1.3.3 Ethernet-based Configuration Tool ............................................... 4

1.3.4 Status LED Indicator ..................................................................... 5

Chapter 2 Product Specifications........................7

2.1 Digital I/O Modules.................................................................................... 8

2.1.1 Overview ....................................................................................... 8

Figure 2.1 ADAM-6150EI............................................................. 8

Figure 2.2 ADAM-6151EI............................................................. 8

Figure 2.3 ADAM-6156EI............................................................. 9

2.1.2 Specifications................................................................................ 9

2.1.3 Switch Settings ........................................................................... 10

2.1.4 Application Wiring ....................................................................... 11

2.2 Relay Modules ........................................................................................ 13

2.2.1 Overview ..................................................................................... 13

Figure 2.4 ADAM-6160EI........................................................... 13

2.2.2 Specifications.............................................................................. 13

2.2.3 Jumper Settings .......................................................................... 14

2.3 Analog I/O Modules................................................................................. 15

2.3.1 ADAM-6117EI: 8-ch Isolated Analog Input Module .................... 15

Figure 2.5 ADAM-6117EI........................................................... 15

2.3.2 ADAM-6118EI: 7-ch Thermocouple and 1-ch CJC Input Module17

Figure 2.6 ADAM-6118EI........................................................... 17

2.3.3 ADAM-6124EI: 4-ch Analog Output and 4-ch Digital Input Module

Figure 2.7 ADAM-6124EI........................................................... 20

ADAM-6100EI Series User Manual vi

Chapter 1

1Overview

ADAM-6100EI Series User Manual 2

1.1 Introduction

ADAM-6100EI is a series of EtherNet/IP remote I/O modules. EtherNet/IP protocol is

very popular in industrial automation applications and all ADAM-6100EI series mod-

ules can comply with it. You can easily connect ADAM-6100EI modules to EtherNet/

IP masters, like Allen-Bradley PLC, through EtherNet/IP protocol. ADAM-6100EI

series module supports Initial mode and Normal mode (EtherNet/IP mode), that

you can set by the DIP switch on the side of ADAM module. Refer to Section 1.3.3 for

how to configure it. When you configure the mode as Initial mode, you can configure

ADAM-6100EI module's IP address and related setting by Advantech APAX/

ADAM.Net utility. When you configure the mode as Normal mode, ADAM-6100EI

modules are ready to communicate with EtherNet/IP master by EtherNet/IP protocol.

1.2 System Architecture

ADAM-6100EI series modules can be daisy-chained in an Ethernet network, making

it easier to deploy, and helping improve scalability. You can refer to the figure below

to see how a daisy-chain connection works in the network.

Figure 1.1 ADAM-6100EI Daisy Chain Connections

3 ADAM-6100EI Series User Manual

Chapter 1 Overview

1.3 Features

1.3.1 Daisy Chain Connection

ADAM-6100EI module has built in Ethernet switches to allow daisy chain connections in an

Ethernet network, making it easier to deploy, and helping improve scalability. The two Ether-

net ports are fully compliant with IEEE 802.3u 10/100Mbpst through standard RJ-45

connectors.

Pin Assignment Description

1 TD + Transmit +

2 TD - Transmit -

3 RD + Receive +

4 N/C not used

5 N/C not used

6 RD - Receive -

7 N/C not used

8 N/C not used

ADAM-6100EI Series User Manual 4

1.3.2 2,500V Isolation Protection

With triple isolation, including power supply, input/output, and Ethernet communica-

tion, ADAM-6100EI series ensures I/O data to be controlled correctly, and prevents

devices from breaking down.

1.3.3 Ethernet-based Configuration Tool

You can configure ADAM-6100EI module as Initial mode or Normal mode by the DIP

switch in the side of each module. When ADAM-6100EI module is set as Initial mode,

you can use ADAM.Net utility to configure and test the module via Ethernet connec-

tion between PC and the module. This can ensure the ADAM-6100EI module is set

properly and is working correctly before connecting it to an EtherNet/IP network.

When ADAM-6100EI module is set as Normal mode, it can directly communicate with

EtherNet/IP master device such as Allen-Bradley PLC by EtherNet/IP protocol.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de E/S de Advantech

Advantech

Advantech PCL-730 Manual de instalación y operación

Advantech

Advantech ADAM-6100PN Series Manual de usuario

Advantech

Advantech MIOe-220 Manual de instalación y operación

Advantech

Advantech USB-4751 Manual de usuario

Advantech

Advantech ADAM-3013 Manual de usuario

Advantech

Advantech AIIS-E730 Manual de instalación y operación

Advantech

Advantech UNO-2000-LKAE Manual de usuario

Advantech

Advantech ADAM-6050W Manual de usuario

Advantech

Advantech PCL-722 Manual de usuario

Advantech

Advantech WISE-4210 Series Manual de instalación y operación

Advantech

Advantech WISE-4000 Series Manual de usuario

Advantech

Advantech PCI-1713 Manual de usuario

Advantech

Advantech PCI-1758UDIO Manual de instalación y operación

Advantech

Advantech PCIE-1762H Manual de usuario

Advantech

Advantech MIC-75G20 Manual de instalación y operación

Advantech

Advantech WISE-4050 Manual de usuario

Advantech

Advantech PCIE-1756H Manual de usuario

Advantech

Advantech AMAX-5000 Series Manual de usuario

Advantech

Advantech ADAM-6156PN Manual de usuario

Advantech

Advantech B+B SmartWorx Zlinx ZZ24D-NA-SR Manual de usuario

Advantech

Advantech USB-582 Manual de instalación y operación

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Advantech

Advantech USB-5817 Manual de instalación y operación

Advantech

Advantech ADAM-6251 Manual de instalación y operación

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario