Advanced Illumination DCS Series Manual de usuario
1595-050143 REV 2.0
DCS Series Lighng Controller—User Manual
The manual includes information about the following:
DCS-100E, DCS-103E
Version information
V2.0 - Updated for DCS100 / 103E REVA 5/20/2019
DCS-Series User Manual 2 1595-050143 v2.0
Contents
Hardware Overview 3
DCS100 / DCS103 Overview 4
Dimensions / Mechanical 5
General Specicaon 6
Front Panel 7
Connecons
Power Input 8
Trigger Input 9
Trigger Diagram 10
Reserved Input 11
Output Connector Pinout and denion 12
Modes of Operaon 13
Quick Start 14
DHCP or Stac IP conguraon 14
GUI Installaon 15
Modes 16
Strobe vs. Connuous 17
Other features 18
Renaming Devices
Changing IP address
Ethernet Web Server
Ethernet Commands 19
Default Ethernet Sengs 19
Command List 20-23
DCS-Series User Manual 3 1595-050143 v2.0
Hardware Overview
The DCS Series lighng controller is a high-exibility controller for machine vision illuminators.
DCS-100E
• Single Independent Output,
• Up to 90W output power, 30W per channel
• 3-Independent Channels within output
Typical Applicaons
• Cost eecve single-light controller
• RGB or other mixed color Lighng
• Single-High Power Lighng; paralleled channel opera-
on provides high power output
DCS-103E
• Three Independent Outputs,
• Up to 90W output power, 30W per output
• 1-Independent Channel within each output
Typical Applicaons
• Cost eecve mul-light controller
• Drive a diverse range of dierent lights independently
• Drive mulple single-color light sources
DCS-Series User Manual 4 1595-050143 v2.0
DCS-100E — Overview
DCS-103E — Overview
Indicator LEDs / Reset Buon
10/100 Ethernet
Power Input (P1) Trigger Input (P2)
Integrated Din-
Rail Mounng
Foot
Power Input (P1) Trigger Input (P2) X3 Output / X1 Channel each
DCS-Series User Manual 5 1595-050143 v2.0
DCS-100E — Dimensions
DCS-103E — Dimensions
DCS-Series User Manual 6 1595-050143 v2.0
General Specicaons
Specicaon DCS-100E DCS-103E Notes
Power Requirements 24VDC Nominal, 4.5A —
Output Power Up to 90W, 30W per channel Up to 90W, 30W per output
Channel Control (3) Independent channels, (1) output
connector
(3) independent outputs, (1)
channel per output
Modes Connuous, Pulsed, or Gated Conn- —
External Trigger Input 5-30VDC compable, Opto-Isolated
inputs
—
Pulse Width Range 10usec - 10msec —Best performance 200usec
Trigger-to-Pulse Latency 10 usec —
Duty Cycle / Frequency 15% duty cycle limit in pulsed mode.
Maximum frequency 5000Hz.
—Maximum Frequency lim-
ited by type of light con-
nected to controller
Maximum Operang Temper-
ature Range
-10 to 125F —
Maximum Operang Temper- 135F —
Communicaon / Soware - 10/100 EthernetStandard TCP-IP,
UDP
- .NET library compable with C#,
etc..
—
DCS-Series User Manual 7 1595-050143 v2.0
Front Panel
Color Behavior Funcon
LED 1 Green On Main Power Indicator
LED 2 Amber Blink Once per second heartbeat when light is connected. Blinks faster
when commands are received.
LEDs 3,4,5 Yellow OFF / ON External trigger status. Blinks ON when Signal is HIGH
Buon SPST Push Push and Release Resets the device to factory sengs– Must be held for at least 5
seconds. Recommended to Power Toggle controller aer factory
DCS-103E
DCS-100E
34 5
1 2 LEDs
1
Reset
Output 3 Output 2 Output 1 x1 channel each
10/100 Ethernet
34 5
1 2 LEDs
1’
Reset
Output 1 x 3 channels
DCS-Series User Manual 8 1595-050143 v2.0
Connecons
Pin Funcon Note
1+24VDC 4.5A supply Recommended for best performance
2DC GND
3DC GND
4SHIELD Oponal: Tied to chassis copper for ESD/EMI protecon. Tie to earth
ground if desired.
Front View of Connector
1 2 3 4
Power Input—P1
DCS-103E
DCS-100E
DCS-Series User Manual 9 1595-050143 v2.0
External Trigger Input
Pin Funcon Note
1Trigger Common Connect to common ground of supply voltage based on sinking/
sourcing requirements. All triggers share common.
2Trigger Input 1 5-30VDC tolerant
3Trigger Input 2 —
4Trigger Input 3 —
Front View of Connector
DCS-103E
1 2 3 4
DCS-100E
DCS-Series User Manual 10 1595-050143 v2.0
Trigger Connecon Diagrams
PNP “Sourcing” Output
Trigger Input Schemac.
NPN “Open Collector” Sinking Output
Pin 1
Pin 2
Pin 3
Pin 4
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Controladores de Advanced Illumination
